闽南地区低温下复合填料强化生物滤柱除臭及微生物分析

通过搭建复合填料-生物滤柱反应装置,在厦门冬季低温环境下开展复合填料(蜂窝煤渣、活性炭、蜂窝沸石和陶粒)强化生物滤柱除臭研究,分析了除臭微生物群落组成特性.复合填料-生物滤柱装置在启动运行15 d时其COD去除率达到85％以上且保持稳定,对H2S和NH3的最大去除率可分别达到91.77％和82.53％,表明挂膜成功.菌...     

环境中的PAES对蟾蜍蝌蚪红细胞微核的影响研究

通过对邻苯二甲酸酯对蟾蜍蝌蚪红细胞微核的影响进行了研究。目的探讨邻苯二甲酸酯对蟾蜍蝌蚪的致突变作用。方法以邻苯二甲酸二甲酯为污染物对蟾蜍蝌蚪染毒24小时,并观察其细胞核变化。所用蟾蜍蝌蚪处于变态期,对污染物较为敏感。结果邻苯二甲酸酯使蟾蜍蝌蚪红细胞微核率以及核异常细胞率上升,微核率随着浓度的增大而上升,在浓度为78 ug/ml,对照组相比有极显著差异P〈0.01,浓度在18.5 ug/ml时试验组突变的细胞核的形态发生显著改变,核异常细胞率与对照组核异常细胞率有显著差异P〈0.05。此时显微镜下观察可见微核、双核、核内凹、核碎裂、无丝分裂时核分裂不均等核的形态变化。结论邻苯二甲酸酯对蟾蜍蝌蚪具有明显的致突变作用。     

太湖不同湖区蓝藻细胞裂解速率的空间差异

2009年在太湖蓝藻水华形成初期(五月)、盛发期(九月)和衰亡期(十月和十一月),运用基于颗粒态酯酶,溶解性酯酶以及酯酶衰变常数测定的酯酶活性方法对不同湖区(藻型和草型湖区)蓝藻的细胞裂解速率进行了计算,在测定颗粒态酯酶、溶解性酯酶活性时,同步分析了太湖优势种群中蓝藻叶绿素a的含量.统计分析结果表明,叶绿素a的浓度与颗粒态酯酶、溶解性酯酶活性有很好的相关性,说明以酯酶活性为指标来计算太湖蓝藻细胞裂解速率是可行的.对不同湖区的细胞裂解速率进行比较,可见湖心和西太湖在蓝藻水华形成初期细胞裂解速率分别为0.072,0.048d-1.水华盛发期以及水华衰亡期,湖心和西太湖的细胞裂解速率分别为0.074～0.770d-1,0.014～0.110d-1.太湖湖心磷酸盐浓度比西太湖低,所以蓝藻生长速率慢,导致细胞裂解速率比西太湖高.但是,在梅梁湾和贡湖,衰亡末期磷酸盐浓度比其它月份高,细胞裂解速率也高.4个采样点在衰亡末期的细胞裂解速率比水华形成初期,暴发期和衰亡初期要高,可能的原因是气温和水体温度下降导致蓝藻生长速度减慢.本研究结果表明,太湖蓝藻细胞裂解速率有明显的空间差异,其具体的影响因素很多,营养盐只是其中一个.     

Emission characteristics of dioxins, furans and polycyclic aromatic hydrocarbons during fluidized-bed combustion of sewage sludge

Pre-dried sewage sludge with high sulfur content was combusted in an electrically heated lab-scale fluidized-bed incinerator. The emission characteristics of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs) were studied. Coal and calcium oxide (CaO) were added during the sewage sludge combustion tests to optimize combustion conditions and control SO2 emission. The results indicated that the flue gases emitted during mono-combustion of sewage sludge were characterized by relatively high concentrations of SO2, NOx and organic pollutants, due to the high sulfur, nitrogen, and volatile matter content of sewage sludge. The total 16 USEPA priority PAHs and 2,3,7,8-substituted PCDD/Fs produced from sewage sludge combustion were found to be 106.14 g/m3 and 8955.93 pg/m3 in the flue gas, respectively. In the case of cocombustion with coal (msludge/mcoal = 1:1), the 16 PAHs and 2,3,7,8-substituted PCDD/Fs concentrations were markedly lower than those found during mono-combustion of sewage sludge. During co-combustion, a suppressant e ect of CaO on PCDD/Fs formation was observed.     

体育馆应急医疗功能转换的可行性评估*

为高效实现体育馆建筑的应急医疗功能转换,建立城市应急医疗体系,在探讨相关案例和体育馆建筑特点的基础上,提出在规划选址、室外空间、主体建筑、基础设施、应急响应能力5个方面建立体育馆应急医疗功能转换的可行性评估指标体系,并采用层次分析法确定各级指标的权重。以某市体育中心为例验证评估指标的合理性。结果表明:该评估指标体系能够合理反映城市体育馆应急医疗功能的差异,具有实用性和可操作性。     

Moisture distribution in sludges based on di erent testing methods

Moisture distributions in municipal sewage sludge, printing and dyeing sludge and paper mill sludge were experimentally studied based on four di erent methods, i.e., drying test, thermogravimetric-di erential thermal analysis (TG-DTA) test, thermogravimetricdi erential scanning calorimetry (TG-DSC) test and water activity test. The results indicated that the moistures in the mechanically dewatered sludges were interstitial water, surface water and bound water. The interstitial water accounted for more than 50% wet basis (wb) of the total moisture content. The bond strength of sludge moisture increased with decreasing moisture content, especially when the moisture content was lower than 50% wb. Furthermore, the comparison among the four di erent testing methods was presented. The drying test was advantaged by its ability to quantify free water, interstitial water, surface water and bound water; while TG-DSC test, TG-DTA test and water activity test were capable of determining the bond strength of moisture in sludge. It was found that the results from TG-DSC and TG-DTA test are more persuasive than water activity test.     

Modification of CeO2-ZrO2 catalyst by potassium for NOx-assisted soot oxidation

Potassium-modified ceria-zirconia catalyst was synthesized by wetness impregnation method.The ageing treatment was performed in static air at 800°C for 20 hr to evaluate the thermal stability of the catalyst.The catalysts were characterized by X-ray diffraction,BET surface area,oxygen storage capacity,NOx-temperature programmed desorption and soot-temperature programmed oxidation measurements.By introduction of potassium,the maximum soot oxidation rate temperature(Tm) of the ceria-zirconia based catalyst de...     

中国和欧美国家环境影响评价流程对比分析

环境影响评价在环境保护中起着重要的作用,而中国环境影响评价工作起步较晚,环境影响评价的技术方法及导则在实践中不断更新;欧美国家作为环境影响评价工作实施较早的国家,对环境影响评价流程及报告内容作了详细规定,也为中国的环境影响评价工作提供了宝贵经验,为了切实发挥环境影响评价的作用,应根据中国的实际情况,在可行性方案比选、公众咨询及参与、项目实施后监测等方面进行改进。     

基于数值仿真-响应表面法的二沉池优化研究

以长沙市某污水处理厂二沉池为例,采用多相流混合物模型与k-ε湍流模型结合对辐流式二沉池内速度场和污泥浓度场进行了数值模拟.以出水口悬浮物浓度(SS)为响应目标,对影响二沉池沉淀效果的3个影响因素(进水口流速、颗粒污泥粒径、挡板的淹没深度)进行中心复合设计(central composite design,CCD),并经响应表面法分析得到影响出水SS的二次回归模型,确定了二沉池沉降的最佳条件:进水口流速为0.03m·s-1,颗粒污泥粒径为220.41μm,挡板的淹没深度为3.45m,采用数值仿真模拟实验得到出水口悬浮物浓度值为2.4mg·L-1,较优化之前的仿真结果一周平均值6.7mg·L-1相比,其处理效率提高了64.2%.采用数值仿真和响应表面法结合对二沉池工艺条件进行优化研究,可以加速寻优过程,是工艺优化的辅助工具.     

Effects of tungsten oxide on the activity and thermal stability of a sulfate-derived titania supported platinum catalyst for propane oxidation

A Pt/WO₃/TiO₂ catalyst for propane oxidation was prepared by a stepwise wet impregnation method, and was aged at 800℃ for 5 hr. Compared to the sulfate-derived titania supported catalyst, the introduction of tungsten oxide as stable Bronsted acid sites led to the formation of more metallic platinum active sites at the Pt/WO₃ interface. The dissociation of surface intermediates for propane oxidation was promoted on the WO₃-modified catalyst. This, as well as the inhibition effects of tungsten oxide on the sintering of anatase and the phase transformation to rutile, resulting in a high activity and thermal stability for the Pt/WO₃/TiO₂ catalyst.