土壤中水动力弥散系数的研究进展

从溶质运移的基本方程出发 ,系统论述了国内外对土壤中水动力弥散系数测定方法的研究进展 ,并指出了上述各种方法的适用条件及存在的问题     

机械镀锌工艺的清洁生产

结合机械镀锌的实际生产过程 ,讨论了机械镀锌实现清洁生产的主要途径 ,并且从工艺过程、经济效益、环境效益 3个方面对机械镀锌进行了综合评价 ,结果表明 ,机械镀锌是切实可行的清洁生产技术     

荧光化学传感器的制备及其在环境分析监测中的应用

随着荧光分析技术和传感技术的发展,荧光化学传感器已经成为一种重要的连续分析测量装置.它具有很高的选择性和灵敏度,可以实现对pH、溶解氧、含氮化合物、有毒害重金属离子、有机污染物进行实时和在线测定,因此在环境分析监测方面具有广泛的应用前景.简要介绍了荧光化学传感器的原理、制备及分类,综述了近年来荧光化学传感器的发展及其在环境分析监测中的最新研究成果,并探讨了荧光化学传感器在环境分析监测领域的应用前景和发展方向.     

侧联式球磨机的噪声控制

介绍了侧联式球磨机噪声产生原理及其噪声控制方法,选择了制作局部式隔声罩的噪声控制设计和装置结构.在中国铝业中州分公司热电厂球磨机上应用,取得了很好的隔声效果.     

硫化氢分解制取氢和硫技术的进展

介绍了 H2 S分解制氢和硫的热力学、动力学最新研究成果 ,综述了 H2 S分解制氢和硫的各种工艺技术的新进展 ,并对这些工艺技术进行了分析和评述。 H2 S分解制氢的同时回收硫是一种很有前途的治理废气减轻污染的方法。     

臭氧-曝气生物滤池处理酸性玫瑰红染料废水

在实验室配制含酸性玫瑰红染料的印染废水，采用臭氧氧化-曝气生物滤池工艺开展处理试验。试验运行结果表明，臭氧氧化处理能提高模拟废水的可生化性，BOD／COD值由原水的0．18上升到0．36。经组合工艺处理后出水COD〈40mg／L，色度40倍以下，SS约50mg／L，处理效果良好。     

Characteristics of molecular weight distribution of dissolved organic matter in bromide-containing water and disinfection by-product formation properties during treatment processes

The characteristics of dissolved organic matter (DOM) and bromide ion concentration have a significant influence on the formation of disinfection by-products (DBPs). In order to identify the main DBP precursors, DOM was divided into five fractions based on molecular weight (MW), trihalomethane formation potential and haloacetic acid formation potential were determined for fractions, and the change in contents of different fractions and total DBPs during treatment processes (pre-chlorination, coagulation, sand filtration, disinfection) were studied. Moreover, the relationship between bromide concentration and DBP generation characteristics in processes was also analyzed. The results showed that the main DBP precursors were the fraction with MW < 1 kDa and fraction with MW 3−10 kDa, and the DBP''s generation ability of lower molecular weight DOM (< 10 kDa) was higher than that of higher molecular weight DOM. During different processes, pre-chlorination and disinfection had limited effect on removing organics but could alter the MW distribution, and coagulation and filtration could effectively remove organics with higher MW. For DBPs, trihalomethanes (THMs) were mainly generated in pre-chlorination and disinfection, while haloacetic acids (HAAs) were mostly generated during pre-chlorination; coagulation and sand filtration had little effect on THMs but resulted in a slight removal of HAAs. In addition, the results of ANOVA tests suggested that molecular sizes and treatment processes have significant influence on DBP formation. With increasing bromide concentration, the brominated DBPs significantly increased, but the bromine incorporation factor in the processes was basically consistent at each concentration.     

A green method to synthesize flowerlike Fe(OH)3 microspheres for enhanced adsorption performance toward organic and heavy metal pollutants

Dyestuffs and heavy metal ions in water are seriously harmful to the ecological environment and human health.Three-dimensional(3 D) flowerlike Fe(OH)_3 microspheres were synthesized through a green yet low-cost injection method,for the removal of organic dyes and heavy metal ions.The Fe(OH)_3 microspheres were characterized by thermal gravimetric analysis(TGA),Fourier transform infrared(FT-IR),and transmission electron microscopy(TEM) techniques.The adsorption kinetics of Congo Red(CR) on Fe(OH)_3 microspheres obeyed the pseudo-second-order model.Cr~(6+) and Pb~(2+) adsorption behaviors on Fe(OH)_3 microspheres followed the Langmuir isotherm model.The maximum adsorption capacities of the synthesized Fe(OH)_3 were 308,52.94,and 75.64 mg/g for CR,Cr~(6+),and Pb~(2+) respectively.The enhanced adsorption performance originated from its surface properties and large specific surface area of 250 m~2/g.The microspheres also have excellent adsorption stability and recyclability.Another merit of the Fe(OH)_3 material is that it also acts as a Fenton-like catalyst.These twin functionalities(both as adsorbent and Fenton-like catalyst) give the synthesized Fe(OH)_3 microspheres great potential in the field of water treatment.     

唐山市南湖湿地水体富营养化治理研究

以芦苇作为人工湿地植物,土壤为基质建立人工湿地,采用人工湿地控制试验的方法深入研究了芦苇和湿地基质对唐山人工湿地南湖污水中氮磷的净化能力以及氮、磷在芦苇根、茎、叶的时空分布和动态变化,实验结果表明：芦苇湿地对污水中的氮、磷的净化效果十分明显,在一个月内对污水中TN的平均去除率可达到61.99%,TP平均的去除率可达51.97%,其中基质吸附和植物吸收作用是湿地脱氮除磷的重要形式。     

Elimination of a pollution associated with chromic acid during the electro-deposition of Cr(III) using appropriate anodic and membrane materials in a double film bath

A method using trivalent chromium has been used to replace hexavalent chromium for the electro-deposition of chromium. Using a tri-chamber bath system various anodic materials and membranes were evaluated to minimize the production of environmentally and health damaging chromic acid. By measuring the absorbance of Cr(VI) at 640 nm, the results indicate that the use of a titanium plated ruthenium (Ti-Ru) anode produces the least amount of chromic acid byproduct compared to lead-gold alloy and graphite anodes. The concentration of Cr(VI) in the immediate vicinity of the Ti-Ru anode decreased from 0.389 mg/L to 0 during a 40-min deposition period. The use of a Nafion^TM quaternary cation exchange membrane portioning the buffer and anode selectively prevented Cr(III) from entering the anode compartment whilst allowing the migration of H⁺ to maintain overall voltaic continuity. It has been demonstrated that the use of a Ti-Ru anode with a Nafion^TM membrane can eliminate the production of chromic acid associated with the electro-deposition of chromium plate thereby preventing its health damaging exposure to plant operators and preventing discharge of Cr(VI) into the environment. Addition of a surfactant improved current efficiency by 34.7%.