关于风景评价中心理物理学方法局限性的探讨

由于对西方风景评价理论和方法缺乏足够的了解和深入的研究，现今国内对其中的心理物理学方法及其作用产生了一些误解。本文在扼要介绍了心理物理学派的主要方法思路之后，着重对该学派所存在的重大理论缺陷和方法局限性做了较深入的分析。     

Propylene glycol vapor contamination in controlled environment growth chambers: toxicity to corn and soybean plants

A major, often unrecognized variable regulating plant growth in semi-closed environment is air contaminant. The vapor of propylene glycol (PG), which was used as coolant in growth chambers, has been found to be toxic to corn (Zea mays L.) and soybean (Glycine max L.) plants. PG solution leaked from a valve packing system and volatilized to vapor, which was trapped in a semi-closed growth chamber. Symptoms of leaf edge chlorosis, later developing into necrosis, were observed on the third day of emergence or on the third day after moving healthy plants into the chamber. For young soybean plants, symptoms were slightly different from those observed in corn plants; the chlorosis symptoms were not uniformly distributed on all leaves. Some soybean leaves curled up and others had white spots. This problem was identified by using a portable photoionization detector to obtain instantaneous readings of total volatile organic compound concentrations inside the chambers. The presence of PG in selected chambers was verified using sample collection with solid phase microextraction (SPME) followed by analysis with multi-dimensional gas chromatography mass spectrometry (MD-GC-MS). This information is pertinent to researchers who use controlled environment to grow plants.     

土壤中水动力弥散系数的研究进展

从溶质运移的基本方程出发 ,系统论述了国内外对土壤中水动力弥散系数测定方法的研究进展 ,并指出了上述各种方法的适用条件及存在的问题     

机械镀锌工艺的清洁生产

结合机械镀锌的实际生产过程 ,讨论了机械镀锌实现清洁生产的主要途径 ,并且从工艺过程、经济效益、环境效益 3个方面对机械镀锌进行了综合评价 ,结果表明 ,机械镀锌是切实可行的清洁生产技术     

荧光化学传感器的制备及其在环境分析监测中的应用

随着荧光分析技术和传感技术的发展,荧光化学传感器已经成为一种重要的连续分析测量装置.它具有很高的选择性和灵敏度,可以实现对pH、溶解氧、含氮化合物、有毒害重金属离子、有机污染物进行实时和在线测定,因此在环境分析监测方面具有广泛的应用前景.简要介绍了荧光化学传感器的原理、制备及分类,综述了近年来荧光化学传感器的发展及其在环境分析监测中的最新研究成果,并探讨了荧光化学传感器在环境分析监测领域的应用前景和发展方向.     

侧联式球磨机的噪声控制

介绍了侧联式球磨机噪声产生原理及其噪声控制方法,选择了制作局部式隔声罩的噪声控制设计和装置结构.在中国铝业中州分公司热电厂球磨机上应用,取得了很好的隔声效果.     

硫化氢分解制取氢和硫技术的进展

介绍了 H2 S分解制氢和硫的热力学、动力学最新研究成果 ,综述了 H2 S分解制氢和硫的各种工艺技术的新进展 ,并对这些工艺技术进行了分析和评述。 H2 S分解制氢的同时回收硫是一种很有前途的治理废气减轻污染的方法。     

臭氧-曝气生物滤池处理酸性玫瑰红染料废水

在实验室配制含酸性玫瑰红染料的印染废水，采用臭氧氧化-曝气生物滤池工艺开展处理试验。试验运行结果表明，臭氧氧化处理能提高模拟废水的可生化性，BOD／COD值由原水的0．18上升到0．36。经组合工艺处理后出水COD〈40mg／L，色度40倍以下，SS约50mg／L，处理效果良好。     

Characteristics of molecular weight distribution of dissolved organic matter in bromide-containing water and disinfection by-product formation properties during treatment processes

The characteristics of dissolved organic matter (DOM) and bromide ion concentration have a significant influence on the formation of disinfection by-products (DBPs). In order to identify the main DBP precursors, DOM was divided into five fractions based on molecular weight (MW), trihalomethane formation potential and haloacetic acid formation potential were determined for fractions, and the change in contents of different fractions and total DBPs during treatment processes (pre-chlorination, coagulation, sand filtration, disinfection) were studied. Moreover, the relationship between bromide concentration and DBP generation characteristics in processes was also analyzed. The results showed that the main DBP precursors were the fraction with MW < 1 kDa and fraction with MW 3−10 kDa, and the DBP''s generation ability of lower molecular weight DOM (< 10 kDa) was higher than that of higher molecular weight DOM. During different processes, pre-chlorination and disinfection had limited effect on removing organics but could alter the MW distribution, and coagulation and filtration could effectively remove organics with higher MW. For DBPs, trihalomethanes (THMs) were mainly generated in pre-chlorination and disinfection, while haloacetic acids (HAAs) were mostly generated during pre-chlorination; coagulation and sand filtration had little effect on THMs but resulted in a slight removal of HAAs. In addition, the results of ANOVA tests suggested that molecular sizes and treatment processes have significant influence on DBP formation. With increasing bromide concentration, the brominated DBPs significantly increased, but the bromine incorporation factor in the processes was basically consistent at each concentration.