微污染水脱氮除磷工艺浅析

因水体富营养化问题及城市供水水源污染问题,人们越来越关注微污染水的治理研究问题,传统的污水处理工艺已无法满足微污染水的处理要求。"曝气生物滤池-生物脱氮滤池-双层除磷滤池"工艺,是一种投资小处理率高的生物处理技术,能很好地解决微污染水脱氮除磷问题,使处理后的出水达到地表水环境质量Ⅲ类水体标准。     

煤矸石自燃机理及其防治技术研究

煤矸石是我国最大的工业固体废弃物,煤矸石自燃是矿区主要的环境问题之一。并系统分析煤矸石的自燃机理,提出预防为主,防治为辅的对策,并重点介绍几种行之有效的煤矸石自燃的防治技术。     

Submerged vegetation removal promotes shift of dominant phytoplankton functional groups in a eutrophic lake

Historical data indicate that the dominance of submerged plants in Dianchi Lake in the 1960 s was characterized by low algal density with dominance of non-toxic group J（Scenedesmus,Pediastrum,etc.）. The removal of submerged plants,which began in the 1970 s,resulted in the expansion of bloom-forming Microcystis（group M）. Laboratory experiments suggested that Microcystis aeruginosa was inclined to grow and develop at elevated temperatures. The growth of Scenedesmus obliquus was slower than that of co-cultivated M. aeruginosa in the absence of Ceratophyllum demersum,especially at higher temperatures. The existence of submerged plant C. demersum could inhibit the growth of the harmful algae M. aeruginosa and this inhibitory effect by C. demersum was enhanced with an increase in temperature. Instead,with C. demersum,the growth of S. obliquus was not inhibited,but the co-cultivated M. aeruginosa was eliminated in a short time. Combined with the historical data and laboratory experiments,it was indicated that the submerged plants might play important roles in the dominance of the non-toxic group J in the historical succession. Consequently,the introduction of the submerged plant such as C. demersum might alter the dominant phytoplankton functional groups from M to J and benefit the restoration of the eutrophic lake.     

论职业卫生安全管理体系标准化与我国职业卫生安全管理及其改革的一致性

职业卫生安全管理体系（ＯＨＳＭＳ）标准倡导好的管理的共同原理,将ＯＨＳＭＳ融入组织总的管理体系,与我国组织职业卫生安全（ＯＨＳ）管理的经验相容,对我国组织在市场经济体制下建立自主安全管理机制有极重要的意义。实施ＯＨＳＭＳ标准不存在经济实力的前提,且ＯＨＳ投入与组织的经济效益是一致的。这种标准化适应了我国经济体制转变时期政府安全管理职能和管理方式的变化,还与我国ＯＨＳ管理体制的改革方向相吻合。我国基本具备实施ＯＨＳＭＳ标准的法律基础。为有效实施ＯＨＳＭＳ标准化,应加强ＯＨＳ法规建设,在监察体系上实行第三方机构的认证／注册制度     

1900个乡镇工业的工伤职业病医疗保障现状分析

在调查的１９００个乡镇工业企业中,有９．３％ 的企业对职工工伤职业病没有任何保障,其中尤其是个体联户所办企业则高达１５％ 。按行业进行分析,最易发生工伤职业病的各种矿山采选业、建材生产业,能给予报销医疗费的企业占７８．５％ ,部分给予报销的企业占１０．２％ ,不予报销企业占１１．３％ 。从保障程度看,能给予全部报销医疗费的企业仍以乡办企业为最高（９３．２％ ）,其次为村办企业（９０．２％ ）和个体联户所办企业（８８．５％ ）     

控轧控冷型Q550高强钢高温后的力学性能试验研究∗

通过升温、降温及冷却后的常温静力拉伸试验,对控轧控冷型(TMCP)Q550高强钢高温后的力学性能展开试验研究,得到了经历200～900℃之间9个不同的过火温度及自然冷却与浸水冷却两种冷却方式后,钢材的表观特征、应力-应变关系与基本力学性能参数,包括弹性模量、屈服强度、抗拉强度及断后伸长率。结果表明,过火温度及冷却方式对TMCP型Q550钢材弹性模量的影响较小;过火温度超过600℃时,钢材高温后的屈服强度和抗拉强度开始折减;过火温度达到700℃后,钢材的应力-应变曲线皆无屈服平台,不同冷却方式的结果开始呈现差异:随过火温度升高,自然冷却后钢材的强度减小而断后伸长率增大,浸水冷却则相反,且二者差异愈加明显。将试验结果与文献结果对比,发现当过火温度超过700℃时,TMCP型Q550高强钢高温后的力学性能与调质型(QT)Q550高强钢存在差异,在经历较高的过火温度后,TMCP钢在自然冷却下的强度折减比QT钢严重,浸水冷却下的强度增长程度低于QT钢。     

Life cycle assessment of TV sets in China: A case study of the impacts of CRT monitors

Along with the rapid increase in both production and use of TV sets in China, there is an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of these sets. This paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of Chinese TV sets. An assessment of the TV set device (focusing on the Cathode Ray Tube (CRT) monitor) was carried out using a detailed modular LCA based on the international standards of the ISO 14040 series. The LCA was constructed using SimaPro software version 7.2 and expressed with the Eco-indicator' 99 life cycle impact assessment method. For a sensitivity analysis of the overall LCA results, the CML method was used in order to estimate the influence of the choice of the assessment method on the results. Life cycle inventory information was compiled by Ecoinvent 2.2 databases, combined with literature and field investigations on the current Chinese situation. The established LCA study shows that the use stage of such devices has the highest environmental impact, followed by the manufacturing stage. In the manufacturing stage, the CRT and the Printed Circuit Board (PCB) are those components contributing the most environmental impacts. During the use phase, the environmental impacts are due entirely to the methods of electricity generation used to run them, since no other aspects were taken into account for this phase. The final processing step-the end-of-life stage-can lead to a clear environmental benefit when the TV sets are processed through the formal dismantling enterprises in China.     

有机磷阻燃剂生产废水预处理工艺研究

采用液膜萃取—酸析沉降—络合萃取组合工艺对有机磷阻燃剂生产废水进行预处理.最佳工艺条件为:液膜萃取时,液膜油相(表面活性剂与煤油的混合液)与内水相(H2SO4溶液)的体积比2∶1、乳化液膜与废水的体积比1∶8、废水pH 13.0,硫酸体积分数10％、煤油中表面活性剂质量浓度30 g/L、液膜萃取时间 15 min;酸析沉降时,废水pH l.0,酸析沉降时间30 min;络合萃取时,络合萃取剂(烷基叔胺N235与煤油的混合液)中烷基叔胺N235体积分数30％,络合萃取剂与废水的体积比1∶4,废水pH l.0,络合萃取时间30 min.在此最佳处理条件下,废水COD总去除率可达93％,吡啶去除率达99.9％以上,总磷去除率可达97％,BOD5/COD提高至0.32,有利于后续生化处理.     

钛基IrO2-RuO2阳极电解处理亚甲基蓝溶液

采用钛基IrO2-RuO2为阳极材料,不锈钢为阴极材料,NaCl质量浓度为10 g/L的溶液为电解液,对亚甲基蓝溶液进行电化学处理。实验结果表明:处理初始质量浓度为25 mg/L的亚甲基蓝溶液,电解电流0.050 A,电解20 min后亚甲基蓝去除率达95%;处理初始质量浓度为100 mg/L的亚甲基蓝溶液,电解电流0.100 A,电解30 min后亚甲基蓝去除率达98%。随着电解时间和电解电流的增加,亚甲基蓝去除率均增大。