Using air quality modeling to study source–receptor relationships between nitrogen oxides emissions and ozone exposures over the United States

Human exposure to ambient ozone (O₃) has been linked to a variety of adverse health effects. The ozone level at a location is contributed by local production, regional transport, and background ozone. This study combines detailed emission inventory, air quality modeling, and census data to investigate the source–receptor relationships between nitrogen oxides (NO_x) emissions and population exposure to ambient O₃ in 48 states over the continental United States. By removing NO_x emissions from each state one at a time, we calculate the change in O₃ exposures by examining the difference between the base and the sensitivity simulations. Based on the 49 simulations, we construct state-level and census region-level source–receptor matrices describing the relationships among these states/regions. We find that, for 43 receptor states, cumulative NO_x emissions from upwind states contribute more to O₃ exposures than the state's own emissions. In-state emissions are responsible for less than 15% of O₃ exposures in 90% of U.S. states. A state's NO_x emissions can influence 2 to 40 downwind states by at least a 0.1 ppbv change in population-averaged O₃ exposure. The results suggest that the U.S. generally needs a regional strategy to effectively reduce O₃ exposures. But the current regional emission control program in the U.S. is a cap-and-trade program that assumes the marginal damage of every ton of NO_x is equal. In this study, the average O₃ exposures caused by one ton of NO_x emissions ranges from ? 2.0 to 2.3 ppm-people-hours depending on the state. The actual damage caused by one ton of NO_x emissions varies considerably over space.     

Detection of DDT and its metabolites in two estuaries of South China using a SPME-based device: First report of p,p′-DDMU in water column

A solid-phase microextration-based sampling method was employed to determine the concentrations of 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) and its metabolites, 1,1-dichloro-2,2-bis(p-chlorophenyl)ethane (DDD), 1,1-dichloro-2,2-bis(p-chlorophenyl)ethene (DDE) and 1-chloro-2,2-bis(p-chlorophenyl)ethene (DDMU), in two estuarine bays, Daya Bay and Hailing Bay, of South China. Six DDT components including p,p′-DDT, o,p′-DDD, p,p′-DDD, o,p′-DDE, p,p′-DDE, and p,p′-DDMU were detected in Hailing Bay, while only p,p′-DDD was found in Daya Bay. p,p′-DDD was the most abundant DDT component in both bays, sharply different from the previous finding in the water column of the Palos Verdes Shelf, California, USA that p,p′-DDE was prevalent. In addition, the occurrence of p,p′-DDMU (with a range of 0.047-0.21 ng/L in Hailing Bay) has not been reported around the globe, and its presence in our study region appeared to stem from dehydrochlorination of p,p′-DDD, favored under aerobic conditions, but further investigations are clearly needed to confirm the mechanism for generation of DDMU in estuarine environments.     

A validated 2-D diffusion–advection model for prediction of drift from ground boom sprayers

Correct field drift prediction is a key element in environmental risk assessment of spraying applications. A reduced order drift prediction model based on the diffusion–advection equation is presented. It allows fast assessment of the drift potential of specific ground boom applications under specific environmental wind conditions that obey the logarithmic wind profile. The model was calibrated based on simulations with a validated Computational Fluid Dynamics (CFD) model. Validation of both models against 38 carefully conducted field experiments is successfully performed for distances up to 20 m from the field edge, for spraying on flat pasture land. The reduced order model succeeded in correct drift predictions for different nozzle types, wind velocities, boom heights and spray pressures. It used 4 parameters representing the physical aspects of the drift cloud; the height of the cloud at the field edge, the mass flux crossing the field edge, the settling velocity of the droplets and the turbulence. For the parameter set and range considered, it is demonstrated for the first time that the effect of the droplet diameter distribution of the different nozzle types on the amount of deposition spray drift can be evaluated by a single parameter, i.e., the volume fraction of droplets with a diameter smaller than 191 μm. The reduced order model can be solved more than 4 orders of magnitude faster than the comprehensive CFD model.     

An observational study of the HONO–NO2 coupling at an urban site in Guangzhou City,South China

The temporal behavior of HONO and NO₂ was investigated at an urban site in Guangzhou city, China, by means of a DOAS system during the Pearl River Delta 2006 intensive campaign from 10 to 24 July 2006. Within the whole measurement period, unexpected high HONO mixing ratios up to 2 ppb were observed even during the day. A nocturnal maximum concentration of about 8.43 ± 0.4 ppb was detected on the night of 24 July 2006. Combining the data simultaneously observed by different instruments, the coupling of HONO–NO₂ and the possible formation sources of HONO are discussed. During the measurement period, concentration ratios of HONO to NO₂ ranged from (0.03 ± 0.1) to (0.37 ± 0.09), which is significantly higher than previously reported values (0.01–0.1). Surprisingly, in most cases a strong daytime correlation between HONO and NO₂ was found, contrary to previous observations in China. Aerosol was found to have a minor impact on HONO formation during the whole measurement period. Using a pseudo steady state approach for interpreting the nocturnal conversion of NO₂ to HONO suggests a non-negligible role of the relative humidity for the heterogeneous HONO formation from NO₂.     

Improvement of the activity of anaerobic sludge by low-intensity ultrasound

This paper aims to study the enhancement effect of low-intensity ultrasound on anaerobic sludge activity and the efficiency of anaerobic wastewater treatment. Dehydrogenate activity (DHA) and the content of coenzyme F(420) were detected to indicate the change of activity of anaerobic sludge induced by ultrasound at 35 kHz. Single-factor and multiple-factor optimization experiments showed that the optimal ultrasonic intensity and irradiation period were 0.2 W/cm(2) and 10 min, respectively, and the biological activity was enhanced dramatically under the optimal condition. The chemical oxygen demand (COD) removal efficiency was increased by ultrasonic treatment and the COD in the effluent was 30% lower than that of the control (without exposure). The hypothetical mechanism of biological activity enhancement by ultrasound was also discussed according to the results.     

Octanol–air partition coefficients of polybrominated biphenyls

The octanol–air partition coefficients (K_OA) for PBB15, PBB26, PBB31, PBB49, PBB103 and PBB153 were determined as a function of temperature using a gas chromatographic retention time technique with 1,1,1-trichloro-2,2-bis (4-chlorophenyl) ethane (p,p′-DDT) as a reference substance. The internal energies of phase change from octanol to air (Δ_OAU) were calculated for the six compounds and were in the range from 74 to 116 kJ mol⁻¹. Simple regression equations of log K_OA versus relative retention times (RRTs) on gas chromatography (GC), and log K_OA versus molecular connectivity indexes (MCI) were obtained, for which the correlation coefficients (r²) were greater than 0.985 at 283.15 K and 298.15 K. Thus the K_OA values of the remaining PBBs can be predicted by using their RRTs and MCI according to these relationships.     

Important role of reaction field in photodegradation of deca-bromodiphenyl ether: Theoretical and experimental investigations of solvent effects

Photolysis of deca-bromodiphenyl ether (BDE-209) was investigated in tetrahydrofuran, dichloromethane, isopropanol, acetone, ethanol, methanol, acetonitrile and dimethylsulfoxide. Noticeable differences of the photolytic rates and quantum yields were found in the diverse solvents. Different to the previous deductions, hydrogen donating efficiency and electron donating efficiency of solvents were not the decisive factors for the photolytic rate in this study, which was proved by the fast photolysis of BDE-209 in CCl₄, a solvent without hydrogen and difficult to donate electrons. Besides hydrogen addition process, intermolecular polymerization might occur during the photolysis. Density functional theory (DFT) calculation was performed to understand the molecular properties of BDE-209 in different solvents. The lowest singlet vertical excitation energy (E_ex) and the average formal charge on Br () of BDE-209, reflecting the difficulty for the excitation of BDE-209 and for the departing of Br atom, respectively, were changed by the reaction fields formed by the different solvents. E_ex and linearly correlated with the photolytic activity (log k). This study is helpful to better understand the photolytic behavior of BDE-209 in different media.     

Perfluorosulfonates and perfluorocarboxylates in snow and rain in Dalian,China

Samples of precipitation events (snow and rain) in Dalian, a typical coastal town in China, were analyzed for perfluorosulfonates (PFSAs) and perfluorocarboxylates (PFCAs) to investigate atmospheric contamination by these compounds. In the snow event on December 16, 2006, samples were collected from 21 different sites and in another 6 precipitation events, samples were collected from a single location. Four PFSAs (C4, C6, C8, C10) and seven PFCAs (C6–12) were analyzed. Among the homologues, perfluorooctane sulfonate (PFOS) concentrations were the highest with a geometric mean (GM) of 145 ng/L (n = 21) during the snow event on December 16, 2006, followed by perfluorooctanoate (PFOA) with a GM of 24.7 ng/L (n = 21). Concentrations of perfluorobutane sulfonate (PFBS), perfluorohexane sulfonate (PFHxS) and perfluoroheptanoate (PFHpA) were more than two orders of magnitude lower than that of PFOS. Other PFSAs and PFCAs were found to be below the limit of detection in all the samples. In other 6 precipitation events, PFSAs and PFCAs were detected approximately in the same order of magnitude in both snow and rain. The results indicate that wet deposition may be a potential transport mechanism of perfluorinated chemicals in the environment.     

Characterization of aluminium-based water treatment residual for potential phosphorus removal in engineered wetlands

Aluminium-based water treatment residual (Al-WTR) is the most widely generated residual from water treatment facilities worldwide. It is regarded as a by-product of no reuse potential and landfilled. This study assessed Al-WTR as potential phosphate-removing substrate in engineered wetlands. Results indicate specific surface area ranged from 28.0 m² g⁻¹ to 41.4 m² g⁻¹. X-ray Diffraction, Fourier transform infrared and energy-dispersive X-ray spectroscopes all indicate Al-WTR is mainly composed of amorphous aluminium which influences its phosphorus (P) adsorption capacity. The pH and electrical conductivity ranged from 5.9 to 6.0 and 0.104 dS m⁻¹ to 0.140 dS m⁻¹ respectively, showing that it should support plant growth. Batch tests showed adsorption maxima of 31.9 mg P g⁻¹ and significant P removal was achieved in column tests. Overall, results showed that Al-WTR can be used for P removal in engineered wetlands and it carries the benefits of reuse of a by-product that promotes sustainability.     

北京市春季大气颗粒物污染特性研究

为研究北京市春季大气颗粒物污染特性,2008年3月至2008年5月,对北京市西三环大气颗粒物进行采样分析.测定了总悬浮颗粒物(TSP)与可吸入颗粒物(PM10)的日平均质量浓度,使用扫描电子显微镜(SEM)观察大气颗粒物的微观形貌,并通过X射线能谱仪(EDX)对样品中的元素组成进行分析.结果表明,TSP和PM10日平均质量浓度以初春最高,春天次之,春夏交际最低;PM10/TSP以春夏交际最高,初春次之,春天最低;大气颗粒物形态有规则和不规则2类,以不规则形态居多,同时发现花粉颗粒存在.EDX分析表明,大气颗粒物所附着的重金属中Pb所占的质量分散最高,并且集中吸附在细粒子颗粒物上.