餐厨垃圾资源化技术研究探析

餐厨垃圾成分复杂,不便于收集、运输、处置,以餐厨垃圾为原料进行资源化处置,即减少了污染物的排放,又获得了清洁能源,餐厨垃圾合理处置是目前亟待解决的环境问题。文章阐述了目前餐厨垃圾的处理现状及研究进展,介绍了餐厨垃圾的中处置技术:堆肥技术、制燃料酒精、制氢、制沼气以及提取生物降解性塑料的技术。从餐厨垃圾资源化和环境保护的角度出发,对目前存在的问题提出了处置对策及建议。     

塔河油田钻井废弃泥浆无害化处理技术研究

为了对新疆塔河油田钻井过程中产生的废弃泥浆的污染情况进行研究,提出了以多个井场废弃泥浆为试样,采用水泥、生石灰、粉煤灰等固化剂进行固化处理,对不同井场的废弃泥浆进行泥浆固化的药剂配比试验,经试验分析确定废弃泥浆浸出液主要污染指标为COD cr和pH值,固化剂中的水泥及生石灰对固化效果起着决定性的影响,结果表明以16%水泥+2%生石灰+8%粉煤灰+1%氯化钙+5%石膏的最佳配比方案,使固化后浸出液中各项环境指标达到排放标准,保证塔河油田的废泥浆固化处理能够有效施行。     

原子荧光光谱法测定环境水体中痕量锡研究

在对环境水进行检测时,一个非常重要的项目就是对锡含量进行检测,所以,运用准确、灵敏的测定方法对环境水体中痕量锡进行检测具有非常重要的意义。文章将结合实验,在对环境水体中的痕量锡进行测定时,运用原子荧光光谱法,对测定环境水体中痕量锡的方法进行了一定的研究。采用原子荧光光谱法测定环境水体中的痕量锡,方法检出限是0.10μg/L,相对标准偏差0.20%~0.90%,实际样品加标回收率为98%~102%,满足环境监测实验室分析测定要求,值得推广。     

Biogenic C-doped titania templated by cyanobacteria for visible-light photocatalytic degradation of Rhodamine B

Cyanobacteria, which occurred in eutrophic water harvest solar light to carry out photosynthesis with high efficiency. In this work, cyanobacteria （Microcystis sp.） were used as biotemplate to synthesize titania structure. The synthesized titania sample had similar morphology to that of the original template in spite of the fragile unicellular structures and extremely high water content of cyanobacterial cells. Incorporation of biogenic C, as well as the morphology inherited from biotemplate improved visible- light absorbance of the titania structure. The sample exhibited higher visible-light photocatalytic activity than commercial titania photocatalyst Degussa P25 for Rhodamine B （RhB） degradation. Compared with those C-doped titania photocatalysts prepared by other methods, cyanobacteria templated titania photocatalyst offer some potential for competitive advantages. The reported strategy opened up a new use for the cyanobacteria. It could also be used for titania in applications such as treatment of polluted water, dye-sensitized solar cells, or other regions.     

Graphene-supported nanoscale zero-valent iron：Removal of phosphorus from aqueous solution and mechanistic study

Excess phosphorus from non-point pollution sources is one of the key factors causing eutrophication in many lakes in China,so finding a cost-effective method to remove phosphorus from non-point pollution sources is very important for the health of the aqueous environment. Graphene was selected to support nanoscale zero-valent iron(nZVI)for phosphorus removal from synthetic rainwater runoff in this article. Compared with nZVI supported on other porous materials,graphene-supported nZVI(G-nZVI) could remove phosphorus more efficiently. The amount of nZVI in G-nZVI was an important factor in the removal of phosphorus by G-nZVI,and G-nZVI with 20 wt.% nZVI(20% G-nZVI)could remove phosphorus most efficiently. The nZVI was very stable and could disperse very well on graphene,as characterized by transmission electron microscopy(TEM) and scanning electron microscopy(SEM). X-ray photoelectron spectroscopy(XPS),Fourier Transform infrared spectroscopy(FT-IR) and Raman spectroscopy were used to elucidate the reaction process,and the results indicated that Fe-O-P was formed after phosphorus was adsorbed by G-nZVI. The results obtained from X-ray diffraction(XRD) indicated that the reaction product between nZVI supported on graphene and phosphorus was Fe3(PO4)2·8H2O(Vivianite). It was confirmed that the specific reaction mechanism for the removal of phosphorus with nZVI or G-nZVI was mainly due to chemical reaction between nZVI and phosphorus.     

LAI inversion algorithm based on directional reflectance kernels

Leaf area index (LAI) is an important ecological and environmental parameter. A new LAI algorithm is developed using the principles of ground LAI measurements based on canopy gap fraction. First, the relationship between LAI and gap fraction at various zenith angles is derived from the definition of LAI. Then, the directional gap fraction is acquired from a remote sensing bidirectional reflectance distribution function (BRDF) product. This acquisition is obtained by using a kernel driven model and a large-scale directional gap fraction algorithm. The algorithm has been applied to estimate a LAI distribution in China in mid-July 2002. The ground data acquired from two field experiments in Changbai Mountain and Qilian Mountain were used to validate the algorithm. To resolve the scale discrepancy between high resolution ground observations and low resolution remote sensing data, two TM images with a resolution approaching the size of ground plots were used to relate the coarse resolution LAI map to ground measurements. First, an empirical relationship between the measured LAI and a vegetation index was established. Next, a high resolution LAI map was generated using the relationship. The LAI value of a low resolution pixel was calculated from the area-weighted sum of high resolution LAIs composing the low resolution pixel. The results of this comparison showed that the inversion algorithm has an accuracy of 82%. Factors that may influence the accuracy are also discussed in this paper.     

泥石流堵河影响因素研究——以岷江上游为例

以岷江上游为研究区,选取堵河型泥石流沟4条、堵塞型和不堵河型泥石流沟各2条,在详细分析和比较8条典型泥石流的流域特征、一次有代表性的泥石流过程的泥石流流体特征及沟口处主河特征的基础上,结合专家问卷调查,得出了与泥石流堵河关系较为密切的因素,它们是:泥石流规模、堆积区主河宽度、泥石流沟床比降、泥石流流量、入汇处主河流量、泥石流颗粒级配、入汇处主河比降、泥石流粘度、重度、泥石流沟与主河夹角、泥石流暴发频率等。     

油田含油污水生化处理技术研究及应用

国内油田在原油生产过程中的产出污水,大部分经过处理后作为水驱采油的水源,部分多余的水经过适当处理后排放,对油田周边环境造成污染.1998年国务院颁布了<关于环境保护若干问题的决定>,决定要求,2000年以前,全国所有工业污染源必须达到国家或地方规定的排放标准.     

化工生产装置活性危害评估

活性危害的评估由理论筛选,热稳定性的实验筛选,动力学参数的检测装置,紧急排放系统的设计、筛选和放大,过程设计和优化等几个部分组成.     

Effects of copper and palladium on the reduction of bromate by Fe(0)

Bromate reduction by Fe(0) with incorporation of copper or palladium was investigated in batch tests. The incorporation of copper led to an increase in the rate of bromate reduction, while incorporation of palladium did not show any effect on bromate reduction by Fe(0), regardless of the bimetal application techniques (either simultaneous addition of Cu(II) or Pd(IV) into the Fe-BrO3- reaction system or using copper or palladium amended iron for bromate removal). Surface analyses by X-ray photoelectron spectroscopy (XPS) and X-ray powder diffraction (XRD) techniques indicated that aqueous Cu(II) was reduced and incorporated into the iron surface to form Cu2O and Cu(0). Among these two species, pure Cu(0) is not an active electron donor to the bromate reduction reaction, as shown by there being no reduction from using Cu(0) powders alone and no enhancement by Fe(0) when physically mixed with Cu(0). Although it has been proposed in the literature that the enhancement of adsorption also contributes to the enhancement of chemical reduction, this is not the case here because adsorption decreased when Cu increased. The enhanced bromate reduction rate in the presence of copper observed here is most likely the result of the newly formed active Cu(I). The presence of PdO was evidenced by XPS but yielded no enhancement in bromate reduction. Finally, the Cu2O present on the iron surface because of copper impurities in commercially available iron was found to be involved in the bromate reduction and to accelerate the reduction rate.