咸宁市桂花资源的开发利用

本文通过分析咸宁市桂花资源的生态环境及其开发利用现状,认为目前应以发展桂花旅游为先导,逐步带动桂花资源全面综合的开发利用,并提出了有关对策     

评价石灰石固硫特性的一种方法

本文以实验数据为基础,采用主成分分析法从众多指标中选择了几个主要指标作为石灰石固硫特性参数的评价体系,并按系统聚类分析方法划分了石灰石评价的等级标准,从而为燃煤锅炉选择固硫剂提供了重要的参考依据。     

Electro-conductive crosslinked polyaniline/carbon nanotube nanofiltration membrane for electro-enhanced removal of bisphenol A

● A crosslinked polyaniline/carbon nanotube NF membrane was fabricated. ● Electro-assistance enhanced the removal rate of the NF membrane for bisphenol A. ● Intermittent voltage-assistance can achieve nearly 100% removal of bisphenol A. ● Membrane adsorption–electro-oxidation process is feasible for micropollutant removal. Nanofiltration (NF) has attracted increasing attention for wastewater treatment and potable water purification. However, the high-efficiency removal of micropollutants by NF membranes is a critical challenge. Owing to the adsorption and subsequent diffusion, some weakly charged or uncharged micropollutants, such as bisphenol A (BPA), can pass through NF membranes, resulting in low removal rates. Herein, an effective strategy is proposed to enhance the BPA removal efficiency of a crosslinked polyaniline/carbon nanotube NF membrane by coupling the membrane with electro-assistance. The membrane exhibited a 31.9% removal rate for 5 mg/L BPA with a permeance of 6.8 L/(m²·h·bar), while the removal rate was significantly improved to 98.1% after applying a voltage of 2.0 V to the membrane. Furthermore, when BPA coexisted with humic acid, the membrane maintained 94% removal of total organic carbon and nearly 100% removal of BPA at 2.0 V over the entire filtration period. Compared to continuous voltage applied to the membrane, an intermittent voltage (2.0 V for 0.5 h with an interval of 3.5 h) could achieve comparable BPA removal efficiency, because of the combined effect of membrane adsorption and subsequent electrochemical oxidation. Density functional theory calculations and BPA oxidation process analyses suggested that BPA was adsorbed by two main interactions: π–π and hydrogen-bond interactions. The adsorbed BPA was further electro-degraded into small organic acids or mineralized to CO₂ and H₂O. This work demonstrates that NF membranes coupled with electro-assistance are feasible for improving the removal of weakly charged or uncharged micropollutants.     

Salinity exchange between seawater/brackish water and domestic wastewater through electrodialysis for potable water

● Present a general concept called “salinity exchange”. ● Salts transferred from seawater to treated wastewater until completely switch. ● Process demonstrated using a laboratory-scale electrodialysis system. ● High-quality desalinated water obtained at ~1 mL/min consuming < 1 kWh/m ³ energy. Two-thirds of the world’s population has limited access to potable water. As we continue to use up our freshwater resources, new and improved techniques for potable water production are warranted. Here, we present a general concept called “salinity exchange” that transfers salts from seawater or brackish water to treated wastewater until their salinity values approximately switch, thus producing wastewater with an increased salinity for discharge and desalinated seawater as the potable water source. We have demonstrated this process using electrodialysis. Salinity exchange has been successfully achieved between influents of different salinities under various operating conditions. Laboratory-scale salinity exchange electrodialysis (SEE) systems can produce high-quality desalinated water at ~1 mL/min with an energy consumption less than 1 kWh/m³. SEE has also been operated using real water, and the challenges of its implementation at a larger scale are evaluated.     

Enhancement of extracellular Cr(VI) reduction for anammox recovery using hydrazine: performance,pathways, and mechanism

● N₂H₄ addition enhanced and recovered anammox performance under Cr(VI) stress. ● N₂H₄ accelerated electron transfer of Cr(VI) reduction for detoxification. ● N₂H₄ enhanced anammox metabolism for activity recovery from Cr(VI) inhibition. ● Extracellular Cr(VI) reduction to less toxic Cr(III) was the dominant mechanism. The hexavalent chromium (Cr(VI)) would frequently impose inhibition to anaerobic ammonium oxidation (anammox) process, hindering the efficiency of nitrogen removal in wastewater treatment. Hydrazine (N₂H₄), which is an intermediate product of anammox, participates in intracellular metabolism and extracellular Cr(VI) reduction. However, the roles of N₂H₄-induced intracellular metabolism and extracellular reduction in nitrogen removal under Cr(VI) stress remain unclear. The addition of 3.67 mg/L of N₂H₄ increased the anammox activity by 17%. As an intermediate, N₂H₄ enhanced anammox metabolism by increasing the heme c content and electron transfer system activity. As a reductant, N₂H₄ accelerated the reduction of c-Cyts-mediated extracellular Cr(VI) to the less toxic Cr(III). Extracellular Cr(III) accounts for 74% of the total Cr in a Cr(VI)-stressed anammox consortia. These findings highlight that N₂H₄-induced extracellular Cr(VI) reduction is the dominant mechanism for the survival of anammox consortia. We also found that N₂H₄ increased the production of extracellular polymeric substances to sequester excessive Cr(VI) and produced Cr(III). Taken together, the study findings suggest a potential strategy for enhancing nitrogen removal from ammonium-rich wastewater contaminated with Cr(VI).     

CDM项目温室气体减排成本的不确定性分析

以清洁发展机制(CDM)为背景,针对计算温室气体排放量和减排成本中存在的不确定性进行了MonteCarlo模拟研究,分析了不确定性变量是如何影响决策变量的.结论是:各类碳排放因子、碳排放量、碳减排成本、减排收益是相互关联而存在连锁影响的,其中的发电碳排放因子和煤炭开采释放的甲烷排放系数是主要的.这为进一步计算或估计存在的风险,从而为参与CDM谈判决策提供重要的决策参考.     

江苏省防震减灾信息网络主页的实现

介绍了江苏省防震减灾信息网络主页的设计方案 ,探讨了Web服务器的选择、浏览器兼容性问题、网页内容与结构布局、地震数据的动态交互 ,HTML/DHTML功能扩展及网络安全 5个方面的问题。重点讨论了防震减灾信息与数据的Web实现和网络安全。     

新型含锆聚碳硅烷制备C/C-SiC-ZrC 复合材料及烧蚀性能

目的提高C/C-SiC复合材料的抗烧蚀性能。方法通过交联固化-碳化工艺获得新型含锆聚碳硅烷(Polyzirconocenecarbosilane, PZCS)裂解产物。采用FT-IR、XPS、TG、XRD、SEM等分析手段表征PZCS先驱体基本结构和固化、裂解产物结构及元素分布等。以PZCS为溶液浸渍先驱体,通过PIP工艺制备得到C/C-SiC-ZrC复合材料,采用氧乙炔烧蚀试验表征其抗烧蚀性能。结果 PZCS陶瓷先驱体经过交联固化工艺能够显著提高其陶瓷产率。TG结果表明,980℃时陶瓷产率达66.37%,所得陶瓷粉末为分散均匀的SiC-ZrC复相陶瓷。C/C-SiC-ZrC复合材料经过氧乙炔试验烧蚀600 s后,其线烧蚀率为0.0067 mm/s,表现出良好的抗烧蚀性能。结论 SiC-ZrC复相陶瓷基体烧蚀过程中,氧化形成SiO2和ZrO2等氧化物涂层,氧化物隔离层能够隔离氧气和热量,阻止其向复合材料内部进一步扩散,可有效提高复合材料烧蚀性能。     

壳聚糖/聚乙二醇/丙烯酸吸附剂对Cu2+、Co2+和Ni2+的吸附选择性和重复利用性

采用扫描电镜(SEM)和红外光谱(FT-IR)对辉光放电电解等离子体(GDEP)技术引发制备的壳聚糖/聚乙二醇/丙烯酸(CS/PEG/AA)聚合物吸附剂的形貌和结构进行了表征.研究了该吸附剂对Cu~(2+)、Co~(2+)和Ni~(2+)的吸附选择性、重复利用性和解吸动力学行为,同时结合X射线光电子能谱(XPS)探讨了可能的吸附机理.结果表明,CS、PEG和AA发生接枝共聚形成聚合物,其表面呈现疏松、多孔的三维网络结构;吸附最佳pH为4.8;在含有Cu~(2+)、Co~(2+)和Ni~(2+)的混合溶液中,CS/PEG/AA对Cu~(2+)有较好的吸附选择性;在EDTA-4Na洗脱液中CS/PEG/AA具有优异的再生和重复利用性,解吸动力学符合解吸准二级模型;Cu~(2+)在CS/PEG/AA上的吸附是由离子交换、配位螯合等共同作用的复杂的物理化学过程.     

通风策略对污泥生物干化过程中含氮气体和甲烷排放的影响

我国污泥生物干化过程中含氮气体(NH_3、N_2O、NO)排放的数据十分缺乏,尤其是NO,因其化学性质极其活泼,在以往的研究中甚少涉及.本研究以东北某大型污泥生物干化厂的连续流强制通风槽式污泥生物干化为研究对象,通过现场试验,考察不同通风策略下干化效率以及含氮气体、温室气体的排放特征.结果表明,当污泥初始含水率约50%时,采用前期供氧为主、中期温度控制为主、后期以除湿和散热为目的的通风策略,可以明显加快污泥干化速率(试验组在第11 d时的含水率为36.6%,对照组为42%),提升干化效果(最终含水率试验组为33.6%,对照组为37.6%),减少氨气累积排放量5%(试验组氨气累积排放为208 mg·m~(-3),对照组为219.8 mg·m~(-3));同时降低温室气体累积排放当量[试验组每吨干物料的温室气体排放当量(eCO_2)为3.61 kg·t~(-1),对照组为3.73 kg·t~(-1)].但NO累积排放量试验组比对照组高出15.9%(试验组为1.9g·m~(-2),对照组为1.6 g·m~(-2)).