巢湖低温高效聚磷菌的筛选及其特性

采用低温富集培养及混合平板分离技术,从巢湖底泥中分离筛选得到2株在低温下仍具有较高效能的菌株D3、D6,经过厌氧/好氧交替培养,2种菌株在低温下(8℃)的除磷率均达到80%以上。在低温下,研究了p H、微量元素对2株菌株生长及除磷率的影响,实验结果表明,2株菌都具有广泛的温度适应性,适宜其生长和除磷的p H为中性偏碱,微量元素的缺乏对2株菌株的生长和除磷效果有不同程度的不良影响。染色观察显示,厌氧培养时菌体内聚羟基丁酸(PHB)颗粒明显增多,转为好氧培养后异染颗粒增多,为典型的聚磷菌特征。经鉴定,2株菌均属假单胞菌属。     

苯并三唑在土壤中的吸附特性

为了解苯并三唑(BTA)在水-土系统中的迁移转化,通过批实验方法研究了BTA在华北平原土样(GSS13)中的吸附,考察了平衡时间、土壤投加量、溶液初始p H以及共存阳离子对吸附的影响。结果表明,在初始阶段,土壤对BTA的吸附速率较快,之后随着吸附点位的减少,吸附逐渐变慢;吸附过程符合准二级反应动力学方程。土壤对BTA的平衡吸附为非线性吸附,吸附等温线为Freundlich型;随着土壤投加量的增大,单位质量土壤吸附BTA的量减少,可能原因是所选土壤对BTA的吸附存在"固体浓度效应"。溶液的p H通过改变BTA的存在形式和土壤表面的带电性而影响吸附,当溶液p H在BTA的p Ka2(8.6)附近时,土壤对BTA的吸附效果最好。此外,溶液中共存阳离子对土壤吸附BTA有不同的影响,Na+对吸附影响不明显,而不同浓度Ca2+对BTA的吸附有不同程度的促进作用。     

Investigation of PM2.5 pollution during COVID-19 pandemic in Guangzhou, China

The COVID-19 pandemic has raised awareness about various environmental issues,including PM_2.5 pollution.Here,PM_2.5 pollution during the COVID-19 lockdown was traced and analyzed to clarify the sources and factors influencing PM_2.5 in Guangzhou,with an emphasis on heavy pollution.The lockdown led to large reductions in industrial and traffic emissions,which significantly reduced PM_2.5 concentrations in Guangzhou.Interestingly,the trend of PM_2.5     

Carbon disulfide at a Chinese viscose factory external and internal exposure assessment

This article presents the results of carbon disulfide exposure measurements in a Chinese viscose rayon factory. The objectives of the study were to identify the external exposure levels at a large factory and to investigate the 2-thiothiazolidine-4-carboxylic acid (TTCA) concentrations in the urine of the subjects who were exposed to carbon disulfide in the working place atmosphere. The metabolism of carbon disulfide in the exposed subjects was also studied in order to demonstrate the best points in time for the internal exposure sampling. The measurement of the amount of personal exposure to carbon disulfide in the air of the workplace was performed by GC-FPD; the presence of TTCA in the workers urine was analyzed by use of a modified HPLC method. The kinetics of TTCA excretion was studied by analyses at different time-points both during and after exposure to carbon disulfide in the subjects. A total of 155 personal samples were obtained. The carbon disulfide concentration in the staple viscose hall was 13.72 +/- 1.12 mg m-3 in terms of the geometric mean +/- geometric standard deviation, and was 20.05 +/- 1.33 mg m-3 in the filament spinning hall. The TTCA values in the subjects who worked in the staple spinning hall were 1.18 +/- 0.43 mg g-1 creatinine and 1.07 +/- 0.38 mg g-1 creatinine for subjects working in the filament spinning hall. The best time for TTCA sampling is at the end of the working shift, the TTCA excretion was stable for a period of 4-12 h after exposure of the subjects to the carbon disulfide. It might be that the Chinese have different anthropometric characteristics; a sampling bias may therefore appear among different races.     

Conserving water by optimizing production schedules in the dyeing industry

Industrial dyeing processes generate a huge amount of wastewater, because the production lines have to be washed out each time when the dye changes. We propose an algorithm for the optimization of production schedule. It aims to reduce the production time and the amount of freshwater consumption by optimization the groups orders according to color. Furthermore, we develop software based on the genetic algorithm and implement it in a Chinese company. We optimize the schedules in three months of the case company and compare its output to actual data. The results show that compared to the original manual schedules, the optimized schedules cut production time by 10–15%, reduce freshwater consumption by 20–30%, and reduce wastewater generation by about 20%.     

纳米TiO_2纤维的制备及其光催化降解甲醛研究

以胶原纤维为模板制备纳米TiO2纤维用于光助催化降解甲醛气体,用扫描电镜(SEM)、X射线衍射(XRD)和N2吸附-脱附技术对纳米TiO2纤维进行了表征。结果表明,纳米TiO2纤维的比表面积为11.33 m2/g,晶型为锐钛矿型。在相同催化反应条件下纳米TiO2纤维对甲醛气体的催化降解率与商品纳米TiO(2Degussa P25)催化剂相当。纳米TiO2纤维的用量、甲醛气体初始浓度是影响催化效果的两个因素。当甲醛气体初始浓度为0.270 mg/m3,相对湿度为38%,气体流速0.1 L/min,纳米TiO2纤维用量为1.0 g时,甲醛的降解率达到96%。因此,纳米TiO2纤维可用于室内甲醛气体的催化降解。