Generalized models for prediction of pentachlorophenol dissipation dynamics in soils

Dissipation of pentachlorophenol (PCP) in soil was investigated and the chemical relationships with soil properties were addressed. The results indicate that the dissipation of extractable PCP residues can be described using first-order kinetics equations, with a half-dissipation time (T(1/2)) ranging from 6.5 to 173.3d. The sharply different patterns of PCP dissipation in different soils were closely related to soil properties. Correlations of stepwise regression equations obtained were significant at 0.01 probability level between soil parameters and extractable PCP residues (R(2)=0.974**) as well as T(1/2) values (R(2)=0.882**). Using pH together with organic carbon content (OC) and soil particle size distribution, the dissipation dynamics of PCP in soil could be accurately predicted.     

Ionic liquid-containing semipermeable membrane devices for monitoring the polycyclic aromatic hydrocarbons in water

Ionic liquid-containing semipermeable membrane devices (IL-SPMDs) were developed to monitor the polycyclic aromatic hydrocarbons in water. Uptake kinetics of naphthalene, 1-methylnaphthalene, phenanthrene, pyrene, chrysene by layflat low-density polyethylene tubing (15 cm x 2 cm) filled with 0.5 ml 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid were studied in a laboratory continuous-flow system for the duration of 16 days. The device concentration factors were in the range of 830-7800 for the studied PAHs. The kinetic parameters of IL/water partition coefficients, analytes uptake rate constants and sampling rates were estimated using mathematical models. These parameters were used in the field experiment to estimate the concentrations of the PAHs in Lanzhou section of Yellow River in China, with the result in comparison with that obtained by triolein-SPMD.     

Aquatic photolysis of hydroxylated polybromodiphenyl ethers under direct UV irradiation: a case study of 2′-HO-BDE-68

Environmental Science and Pollution Research - Hydroxylated polyhalodiphenyl ethers (HO-PXDEs) have attracted considerable scientific interest as examples of emerging aquatic pollutants. However, a...     

CO2 dynamic of Lake Donghu highlights the need for long-term monitoring

Environmental Science and Pollution Research - Inland freshwater lakes have been widely considered as significant sources of CO2 to the atmosphere. However, long-term measurements of CO2 dynamics...     

吸附增效低温等离子体法去除甲苯废气的研究

采用150Hz中频高压交流电源作为低温等离子体发生源,选用典型的微孔γ-Al2O3球形颗粒吸附剂(以下简称γ-Al2O3)作为等离子体反应器填充材料,协同低温等离子体法催化降解甲苯废气。考察了在不同条件下,γ-Al2O3的甲苯吸脱附效果和吸附增效低温等离子体法的甲苯去除效果。结果表明,甲苯降解反应主要发生在γ-Al2O3的表面,甲苯的去除率在一定的浓度范围内与γ-Al2O3表面吸附的甲苯量成正比关系;填充γ-Al2O3有利于提高甲苯去除率及等离子体反应器能量利用率;γ-Al2O3对臭氧的降解表现出一定的促进作用。     

磁性埃洛石对水溶液中盐酸土霉素的吸附

采用一种简便的方法对埃洛石纳米管进行加磁,得到的磁性埃洛石纳米管（MHNTs）利用x射线衍射仪（XRD）、透射电子显微镜（TEM）、振动样品磁强计（VSM）和原子吸收光谱仪（AAS）进行表征,结果表明,MHNTs具有很强的磁性性能（Ms=34．02emu／g）以及较低损失磁性粒子的性能。制备的MHNTs作为吸附剂吸附水溶液中的盐酸土霉素,并且探索反应温度、溶液pH和起始浓度等对MHNTs吸附盐酸土霉素性能的影响。研究表明,Langmuir等温线模型更优于Freundlich等温线模型,其动力学的研究结果利用拟二阶方程能够很好地进行说明。此外,MHNTs作为吸附剂经过3次的重复使用吸附能力没有明显的降低。     

Ozonation as an advanced oxidant in treatment of bamboo industry wastewater

The present study employed ozonation process to treat the bamboo industry wastewater (BIWW). The impact of ozone dosage and initial organic concentration on color, COD and TOC removal rates were studied along with characterization of the major organics in raw and treated wastewater. The results suggested the ozone dosage of 3.15 g h⁻¹ (concentration 52.5 mg L⁻¹) was suitable for the treatment. After 25 min ozonation of 1 L raw wastewater, the color, COD and TOC removal efficiencies were 95%, 56% and 40%, respectively, with an influent COD concentration of 835 mg L⁻¹. The ratio of kg O₃ kg⁻¹ COD at 3.15 g h⁻¹ was 2.8 (<3), revealing that ozonation was a cost effective process for tertiary treatment of BIWW. Longer oxidization time was required to achieve similar results for raw wastewater with higher COD concentration. The chromatogram from gel permeation chromatography revealed that ozonation resulted in the breakdown of high molecular weight compounds into lower molecular weight components but could not completely mineralize the organic matter. The majority of these compounds were identified in both raw and ozonated samples via GC-MS analysis. In addition to ester derivatives as the main intermediates of ozonation, 1-chloroctadecane, methyl stearate, benzophenone and α-cyperone were identified as the by-products of ozonation.     

Changes of copper speciation in maize rhizosphere soil

Chemical forms of copper in the rhizosphere and bulk soil of maize were investigated using rhizobox cultivation and sequential extraction techniques. The copper accumulations were also determined. The results demonstrated that there were continuous changes in copper fractionation within the maize rhizosphere. Initially, the amount of exchangeable copper increased before dropping below the initial level after 40 days or so. Carbonate associated copper followed a similar trend of change, but with a slower pace than the exchangeable copper. The increase in carbonate associated copper only become evident after 30 days, with the net loss occurring after 60 days. There were also initial increases in oxide bound copper as well as decreases in the organic matter associated copper, both followed by a turnover after 40-50 days. The accumulation of copper in the maize plant was found to be biomass dependent. The amount of accumulated copper absorbed in the plant material exceeded the initial quantity of the exchangeable copper in the soil, revealing a transformation from less bioavailable to more bioavailable fractions. During cultivation, decreases in redox potential and increases in pH, dissolved organic carbon (DOC), and microbial activity in the maize rhizosphere were observed. The change in copper speciation may result from root-induced changes in DOC, redox potential, and microbial activity in the rhizosphere.     

强化一级处理与SBR工艺处理油脂精炼加工废水

介绍了规模为200 m^3/d的油脂精炼加工废水处理工程的设计与运行.先经强化一级处理工艺预处理,再经SBR工艺处理,出水的有关指标能达到设计的排放标准,工艺运行稳定.