京津冀典型城市采暖季颗粒物浓度与元素分布特征

选择京津冀地区3个典型城市和从南至北的4个国家大气背景站作为研究对象,收集采暖季空气颗粒物PM2.5、PM10样品,微波消解-ICP-MS法分析了样品中的68种元素。结果表明,北京、天津、石家庄PM2.5和PM10日均质量浓度均高于国家二级标准限值和背景点,一元线性回归分析结果表明,PM10与PM2.5质量浓度呈线性相关,Na、Mg、Al、S、K、Ca、Fe质量浓度为0.1~10μg/m3,Si、P、Ti、Mn、Ni、Cu、Zn、Ba、Pb质量浓度为10~100 ng/m3,其他元素质量浓度为0.01~10 ng/m3或未检出。在元素构成上,S、Na、Al、K、Fe、Mg、Ca、P、Si等是主要元素,元素含量均大于1%。其他微量元素每种元素含量为0.1%~1%。14种重点防控重金属在PM2.5中的吸附显著高于PM10,主要来源于燃煤、燃油、工业排放、机动车尾气等。     

便携式分光光度计法快速测定水中砷方法研究

通过研究各仪器性能指标以及测定实际水质样品,对3种便携式分光光度计快速测定水中砷的方法进行了优化和比对研究。结果表明,ZZW-Ⅱ测试仪快速测定水中砷的方法检出限(0.2 mg/L)高于JH 916检测仪和PORS-15 V光谱仪的方法检出限(0.008和0.009 mg/L),在突发性环境污染事故应急监测中,JH 916检测仪和PORS-15 V光谱仪具有相对较高的灵敏度。ZZW-Ⅱ测试仪和JH 916检测仪快速测定水中砷的方法精密度相近,其测定结果相对标准偏差均未超过5.7%(n=6),PORS-15 V光谱仪快速测定水中砷的方法精密度稍差,其相对标准偏差最大值为17%。测定实际样品时,加标回收率分别为110%~126%(ZZW-Ⅱ测试仪),63%~108%(PORS-15 V光谱仪),78%~101%(JH 916检测仪)。3种便携式分光光度计与实验室分析方法相比,测定结果精密度均存在显著性差异,测定结果相对偏差亦较大,相对偏差最大值分别为-19.0%(ZZW-Ⅱ测试仪),17.0%(PORS-15 V光谱仪),-15.0%(JH 916检测仪)。     

Impact of socioeconomic development on ecosystem services and its conservation strategies: a case study of Shandong Province,China

Ecosystems and their components provide a lot of benefits for the welfare of human beings. Coupled with increasing socioeconomic development, most of the rapidly developing and transitional countries and regions have been experiencing dramatic land use changes. This has resulted in a large amount of forestland, grassland, and wetland being occupied as residential and industrial land or reclaimed for arable land, which in turn results in a sharp deterioration of ecosystem services around the world. Shandong Province, an economically powerful province of China, was chosen as a case study in order to capture the impact of socioeconomic development on ecosystem services. By way of the study, land uses and their changes were categorized between 1980 and 2006, and the ecosystem services capital and changes of 111 counties of Shandong Province in different phases were evaluated, as well as the total ecosystem services capital, followed by the zoning of ecosystem services function region of Shandong Province. We found that the counties in mountainous areas and wetlands, where generally the prefectural-level cities are located with a rapid socioeconomic development, experienced a successive deterioration of ecosystem services especially during the 2000s. Finally, three conservation strategies for managing and improving ecosystem services were proposed and discussed with the aim of achieving coordinate and sustainable development of the socioeconomy, environment, and ecosystems not only in Shandong Province but also in other provinces of China, as well as in other developing and transitional countries and regions.     

Evaluating the difference between the normalized difference vegetation index and net primary productivity as the indicators of vegetation vigor assessment at landscape scale

Both the net primary productivity (NPP) and the normalized difference vegetation index (NDVI) are commonly used as indicators to characterize vegetation vigor, and NDVI has been used as a surrogate estimator of NPP in some cases. To evaluate the reliability of such surrogation, here we examined the quantitative difference between NPP and NDVI in their outcomes of vegetation vigor assessment at a landscape scale. Using Landsat ETM+ data and a process model, the Boreal Ecosystem Productivity Simulator, NPP distribution was mapped at a resolution of 90 m, and total NDVI during the growing season was calculated in Heihe River Basin, Northwest China in 2002. The results from a comparison between the NPP and NDVI classification maps show that there existed a substantial difference in terms of both area and spatial distribution between the assessment outcomes of these two indicators, despite that they are strongly correlated. The degree of difference can be influenced by assessment schemes, as well as the type of vegetation and ecozone. Overall, NDVI is not a good surrogate of NPP as the indicators of vegetation vigor assessment in the study area. Nonetheless, NDVI could serve as a fairish surrogate indicator under the condition that the target region has low vegetation cover and the assessment has relatively coarse classification schemes (i.e., the class number is small). It is suggested that the use of NPP and NDVI should be carefully selected in landscape assessment. Their differences need to be further evaluated across geographic areas and biomes.     

Risk assessment of heavy metals in road and soil dusts within PM2.5, PM10 and PM100 fractions in Dongying city, Shandong Province, China

15 road and 14 soil dust samples were collected from an oilfield city, Dongying, from 11/2009-4/2010 and analyzed by inductively coupled plasma-mass spectroscopy (ICP-MS) for V, Cr, Mn, Co, Ni, Cu, Zn, As, Cd and Pb within PM(2.5), PM(10) and PM(100) fractions synchronously. Metal concentrations, sources and human health risk were studied. Results showed that both soil and road dust exhibited higher values for Mn and Zn and lower values for Co and Cd for the three fractions. Mass concentration ratios of PM(2.5)/PM(10) and PM(10)/PM(100) for metals in road and soil dust indicate that most of the heavy metals tend to concentrate in fine particles. Geoaccumulation index and enrichment factors analysis showed that Cu, Zn and Cd exhibited moderate or heavy contamination and significant enrichment, indicating the influence of anthropogenic sources. Vanadium, Cr, Mn and Co were mostly not enriched and were mainly influenced by crustal sources. For Ni, As and Pb, they ranged from not enriched to moderately enriched and were influenced by both crustal materials and anthropogenic sources. The conclusions were confirmed by multivariate analysis methods. Principle component analysis revealed that the major sources were vehicle emission, industrial activities, coal combustion, agricultural activities and crustal materials. The risk assessment results indicated that metal ingestion appeared to be the main exposure route followed by dermal contact. The most likely cause for cancer and other health risks are both the fine particles of soil and road dusts.     

Production of Curdlan Grown on Cassava Starch Waste Hydrolysates

Cassava starch waste hydrolysates (CSWHs) with different degrees of polymerisation, i.e., CSWHs-1, CSWHs-2 and CSWHs-3, were prepared through the hydrolysis of cassava starch waste with thermostable a-amylase from Thermococcus sp. HJ21. The prepared CSWHs were then used as a carbon source for curdlan production with Alcaligenes faecalis ATCC 31749. The amount of curdlan produced and the glucosyltransferase activity during curdlan synthesis increased more obviously when CSWHs-2 was used as the carbon source than when glucose was used. Using both carbon sources, the maximum curdlan production was observed at day 5, and the maximum glucosyltransferase activity was observed at day 4. Glucosyltransferase activity decreased thereafter, and biomass continued to increase until the end of the experiment (day 6). Results indicated that the enhanced curdlan production with CSWHs as the carbon source was highly correlated with glucosyltransferase activity.     

Robust Regression with Data-Dependent Regularization Parameters and Autoregressive Temporal Correlations

We introduce robust procedures for analyzing water quality data collected over time. One challenging task in analyzing such data is how to achieve robustness in presence of outliers while maintaining high estimation efficiency so that we can draw valid conclusions and provide useful advices in water management. The robust approach requires specification of a loss function such as the Huber, Tukey’s bisquare and the exponential loss function, and an associated tuning parameter determining the extent of robustness needed. High robustness is at the cost of efficiency loss in parameter loss. To this end, we propose a data-driven method which leads to more efficient parameter estimation. This data-dependent approach allows us to choose a regularization (tuning) parameter that depends on the proportion of “outliers” in the data so that estimation efficiency is maximized. We illustrate the proposed methods using a study on ammonium nitrogen concentrations from two sites in the Huaihe River in China, where the interest is in quantifying the trend in the most recent years while accounting for possible temporal correlations and “irregular” observations in earlier years.     

Nutrients Availability Shapes Fungal Community Composition and Diversity in the Rare Earth Mine Tailings of Southern Jiangxi,China

Russian Journal of Ecology - The present study characterized the nutrients availability of three rare earth tailings deserted in different time stages in Southern Jiangxi of China, and revealed the...     

钙钛矿型催化剂催化湿式氧化处理煤气化废水纳滤浓缩液

采用溶胶-凝胶法制备了Mn掺杂钙钛矿型催化剂LaFexMn1-xO3,并以其为催化剂催化湿式双氧水氧化处理煤气化废水纳滤浓缩液。采用XRD,SEM,FTIR技术对催化剂进行了表征。表征结果显示：制备的催化剂均具有标准的钙钛矿型结构,其中,LaFe0.9Mn0.1O3的结构稳定,比表面积大。实验结果表明：制备的催化剂中LaFe0.9Mn0.1O3的催化活性最高,且稳定性好,连续使用5次后催化活性未见明显减弱;在H2O2投加量3.0 g/L、n（H2O2）∶n（LaFe0.9Mn0.1O3）=12∶1、反应温度160 ℃、反应压力1 MPa、浓缩液pH 3、反应时间60 min的最优条件下,COD、UV254和TOC的去除率分别达到80.9%、95.2%和68.0%,BOD5/COD由0.02提升至0.40,可生化性大幅提高。     

Spatial simulation and LCA evaluation on the plastic waste recycling system in Tianjin

With the rapid economic development in China, the amount of plastic waste (PW) generated has greatly increased and much of the waste is currently not treated. To reduce greenhouse gas (GHG) emissions from recycling of PW, we estimated the PW flow and considered methods to improve the household PW recycling system in Tianjin by adjusting processes during transportation and establishing a PW recycling factory in Zi’ya Industrial Park. The goal of the study was to identify reasonable improvements for the recycling system and clarify the environmental load. Geographic information system (GIS) technology was used to simulate transport processes for comparing GHG emissions from the transport processes between the present case and an improved case. Life cycle assessment (LCA) was used to compare GHG emissions between a projected scenario and a baseline scenario. Estimated GHG emissions during transport processes in the improved case were reduced by about 12,197 t CO₂ eq per year compared to the present case, equivalent to about 65.9 % of the total emissions in the present case. GHG emissions in the projected scenario were about 101,738 t CO₂ eq less per year than the baseline scenario, equivalent to about 75.5 % of the total emissions in the baseline scenario.