海绵城市规划指标分解案例研究——以北京A新城为例

设计指标分解是海绵城市规划设计的重难点,但目前并没有统一的标准来指导实践.为探索海绵城市规划指标分解方法,以A新城海绵城市专项规划为例,将年径流总量控制率、控制容积作为控制性指标,下沉式绿地率、透水铺装率、绿色屋顶率和调蓄容积作为引导性指标,结合建设情况、汇水面种类及构成情况等条件,利用海绵城市规划设计辅助计算软件加权...     

Mn-Ce/TiO2低温SCR催化剂成型过程添加剂的影响

催化剂成型过程中添加剂的种类和添加量对成型后催化剂的机械强度、成型效果和催化性能有很大影响.本文研究了Mn-Ce/TiO₂催化剂制备过程中添加剂对催化剂的低温脱硝性能和机械性能的影响.结果表明,添加10%的拟薄水铝石作为黏结剂,可使催化剂具有较强的机械强度;添加2.5%的活性炭作为造孔剂,可以有效改善催化剂的孔结构.催化剂成型后脱硝性能下降,反应温度为90℃和120℃时,催化剂的NO_x转化率分别下降了15%和30%左右,当温度到达150℃及以上时,催化剂成型前后的脱硝性能基本一致.最后,通过BET、FT-IR、NH₃-TPD和H₂-TPR表征分析原因：成型后催化剂比表面积和孔容下降,催化剂的表面酸性位点和氧化还原能力下降都会影响催化剂的脱硝性能,所以催化剂成型后低温活性变差.     

城市生态规划的理论与方法

综述城市土地利用生态规划和城市生态系统对策规划的状况，分析并提出了城市生态规划的两种类型，即生态规划方法和城市生态系统水平上进行的生态对策规划，并对这两种生态规划的发展进行了探讨。     

亚硫酸钙脱硫法及其机理

针对石灰乳直接脱硫存在的结垢问题,提出了亚硫酸钙脱硫法,并研究了该法的反应机理及主要因素对脱硫率的影响,确立了适宜的操作条件.即在空塔气速2.75m/s、L/G=3.0 L/m³、固含量6.7%、气温31℃、进口SO₂初始体积分数1500×10^-6、进塔液pH=8.0并维持不变的条件下,连续运转中的脱硫率可达87%.该法从理论上解释、实践上解决了石灰湿法脱硫过程中设备的结垢问题,其实质是以全钙基物质为脱硫剂的新型间接石灰法.     

Temporal variability of atmospheric particulate matter and chemical composition during a growing season at an agricultural site in northeastern China

This study presents the observations of PM_(10) and PM_(2.5) concentrations at an agricultural site from April to October 2012 in Dehui city,China.Ambient air was sampled by filter-based samplers and online PM monitors.The filter samples were analyzed to determine the abundance of ionic/inorganic elements,organic carbon(OC) and elemental carbon(EC).The daily PM_(10) concentrations varied significantly over the monitoring period,with an average of168 ± 63(in the range of 52-277) μg/m~3 during the land preparation/planting period(26 April-15 June),85 ± 65(36-228) μg/m~3 during the growing season(16 June-25 September),and 207 ±88(103-310) μg/m~3 during the harvest period(26 September-31 October).PM_(2.5) accounted for44%,56%and 66%of atmospheric PM_(10) during these periods,respectively.The PM_(10) diurnal variation showed a distinct peak from 16:00 to 21:00(LST) during the growing and harvesting seasons,while a gradual increase throughout the daytime until 17:00 was observed during tilling season.Mineral dust elements(Al,Ca,Fe,and Mg) dominated the PM_(10) chemical composition during the tilling season;OC,NO_3~-,SO_4~(2-) and NH_4~+ during the growing season;and carbonaceous species(i.e.,OC and EC) during the harvesting season.Our results indicate that the soil particles emitted by farm tillage and organic matter released from straw burning are the two most significant sources of PM_(10) emissions contributing to the recurring high pollution events in this region.Therefore,development of agricultural PM inventories from soil tillage and straw burning is prioritized to support air quality modeling.     

木质家具行业农民工职业危害预防与教育

近年来,我国经济的蓬勃发展带动了家具行业的迅速发展,家具制造企业数量和从业人员不断增加、企业规模不断扩大。目前我国家具企业数量及从业人数居世界首列,家具企业6万余家、从业人员650余万人。根据《国民经济行业分类与代码》GB/T4754-2002,家具制造业分为木质家具制造、竹藤家     

金/钴氢氧化物膜修饰玻碳电极同时测定邻苯二酚和对苯二酚

文章将纳米金与钴氢氧化物膜的催化作用有效结合,制备了GNPs/CoOOH复合修饰电极,该修饰电极在碱性条件下对邻苯二酚和对苯二酚具有较强的电催化活性。考察了支持电解质酸度及纳米金沉积时间对邻苯二酚和对苯二酚电化学响应的影响,选取0.1 mol/L PBS(pH 10.0)作为支持电解质,纳米金的最佳沉积时间为4 min。在优化的实验条件下,利用差示脉冲伏安法(DPV)对邻苯二酚和对苯二酚进行选择性检测:当两者浓度同时改变时,对苯二酚和邻苯二酚的氧化峰电流与其浓度分别在7~100μmol/L和6~100μmol/L范围内呈良好的线性关系,对应的检出限分别为0.9、0.8μmol/L(S/N=3)。该复合修饰电极具有较好的重现性、稳定性及较强的抗干扰能力。     

多氯联苯在典型污染地区环境中的分布及其环境行为

利用有效的分离、分析方法对某典型地区水、土壤、底泥、生物样品中ＰＣＢｓ的污染情况进行了初步调查。指出该地区在相当严重的ＰＣＢｓ污染。在底泥中ＰＣＢｓ的渗透作用较弱。对不同ＰＣＢｓ异构体分布规律探讨表明：在水－底泥鱼体中高氯取代的ＰＣＢｓ同类物所占比例依次增加，鱼体不同组织内ＰＣＢｓ总含量的分布规律为肝＞卵＞胆汁＞肌肉。     

基于区域气候模式CCLM的中国极端降水事件预估

选用中国气象局国家气候中心由逐日观测资料插值而成的格点化观测数据集,评估了区域气候模式COSMO-CLM(CCLM)对中国极端降水的模拟能力,并对2016—2050年中国极端降水事件进行预估。文中主要采用强度-面积-持续时间(Intensity-Area-Duration,IAD)方法,识别了既定时间尺度下具有一定强度和影响面积的极端降水事件,分析未来中国极端降水事件的特征和变化趋势,结果表明:1)区域气候模式CCLM对中国极端降水的空间分布和变化趋势均有较强的模拟能力;2)2016—2050年中国极端降水事件整体呈增加趋势,RCP 8.5情景下变化更为显著,事件强度更大;3)未来不同情景下,均有可能发生强度或影响面积超过基准期最大值的事件,其中影响面积大的事件多发生在华北和东北,强度大的事件多发生在西南和华南。     

The influence of various additives on coagulation process at different dosing point: From a perspective of structure properties

Structure properties of flocs (size, fractal dimension (D_f), etc.) have a high impact on coagulation efficiency. In this work, the influences of three different additives (ferric salt (Fe), phosphate (P), and citric acid (CA)) on coagulation process/efficiency were investigated. Results showed that a small amount of extra Fe can facilitate the growth of Al flocs by providing more ‘active sites’. Although zeta potential and D_f showed a limited change, the average floc size increased apparently and the increment was more obvious when Fe was added after the formation of the flocs. In contrast, P addition during the rapid mixing period will decrease the final average floc size, while the influence is less significant when P was added after the growth of the flocs. In terms of CA, a more striking negative effect on the growth ability of the flocs was observed compared to P. The strong complexing/coordination interactions between CA and aluminum hydroxide is the main reason behind the influence. CA also significantly decreased the D_f value of the flocs compared to P, and D_f showed a comparatively higher decrease when P or CA was added during the rapid mixing stage compared to the addition after the flocs formation. These results indicated that the addition of CA or P during the rapid mixing stage ‘inactivated’ or occupied more ‘active sites’ on the preliminarily formed Al NPs during the hydrolysis process, and therefore presented stronger impact on the morphology/size of the formed flocs.