ABSTRACT Montan resin (MR) is a by-product produced during the refinement process of montan wax extracted from lignite and has no usage yet. Chemical modification is an effective method to change the material property for expanding or converting the application area of the material itself. Our previous study found that the high hydrophobicity of MR is the primary limiting factor for its utilization in agriculture. Based on this point, this study attempted to chemically modify MR using the oxidation of peracetic acid, resulting that the MR hydrophilicity was significantly improved, and a water-soluble product (WSP) was obtained. The optimized oxidation conditions of MR, including the reaction temperature (X1), reaction time (X2), weight ratio of oxidant and montan resin (X3), and oxidant concentration (X4), were determined using single-factor experiments and response surface analysis. The modification degree was evaluated using elemental and oil-water partition coefficient analyses, infrared (IR) spectroscopy, and gas chromatography-mass spectrometry (GC-MS), revealing that the oil-water partition coefficient of the modified product decreased and that the number of chemical constituents with oxygen-containing functional groups clearly increased after modification. Furthermore, the WSP was tested its effects on germination and seedling growth of the wheat seed. Compared with the control group, the WSP showed a promoting effect on the growth and germination of wheat. The WSP concentrations of 600 mg·L?1 and 300 mg·L?1 had the most substantial effect on the root and seedling growth of wheat, respectively. Implications: Montan resin, a useless by-product produced from crude montan wax, was chemically modified via oxidation of peracetic acid. Its hydrophilicity was significantly improved, and a water-soluble product was obtained after the chemical modification. The optimized oxidation conditions of montan resin were determined using single-factor experiments and response surface analysis. The amount of chemical constituents with oxygen-containing functional groups increased in the modified products after modification, as determined by IR and GC-MS analysis, among other methods. The water-soluble modified product showed an obvious effect in promoting growth and germination of wheat at 600 mg·L-1 and 300 mg·L-1, respectively. 相似文献
•Ultra-lightweight ceramsite is prepared with 80% fly ash.•SiO2, Al2O3, and flux contents significantly influence the performance of ceramsite.•The expansion of ceramsite is caused by the formation of a dense glaze and gas. •The bulk density of ultra-lightweight ceramsite is only 340 kg/m3. The disposal of fly ash has become a serious problem in China due to its rapid increase in volume in recent years. The most common method of fly ash disposal is solidification-stabilization-landfill, and the most common reuse is low-value-added building materials. A novel processing method for preparing ultra-lightweight ceramsite with fly ash was developed. The results show that the optimal parameters for preparation of ultra-lightweight ceramsite are as follows: mass ratio of fly ash:kaolin:diatomite= 80:15:5, preheating temperature of 800°C, preheating time of 5 min, sintering temperature of 1220°C, and sintering time of 10 min. The expansion agent is perlite, at 10 wt.% addition. Finally, a ceramsite with bulk density of 340 kg/m3, particle density of 0.68 g/cm3, and cylinder compressive strength of 1.02 MPa was obtained. Because of its low density and high porosity, ultra-lightweight ceramsite has excellent thermal insulation performance, and its strength is generally low, so it is usually used in the production of thermal insulation concrete and its products. The formation of a liquid-phase component on the surface, and generation of a gas phase inside ceramsite during the sintering process, make it possible to control the production of the suitable liquid phase and gas in this system, resulting in an optimization of the expansion behavior and microstructure of ceramsite. These characteristics show the feasibility of industrial applications of fly ash for the production of ultra-lightweight ceramsite, which could not only produce economic benefits, but also conserve land resources and protect the environment. 相似文献
The immobilization agent was the key factor that determined the success of remediation of heavy metal polluted soil. In this study, mercapto-grafted palygorskite (MP) as a novel and efficient immobilization agent was utilized for the remediation of Cd-polluted paddy soil in pot trials, and the remediation mechanisms were investigated in the aspect of soil chemistry and plant physiology with different rice cultivars as model plants. Mercapto-grafted palygorskite at applied doses of 0.1–0.3% could reduce Cd contents of brown rice and straws of different cultivars significantly. Both reduced DTPA-extractable Cd contents in rhizosphere and non-rhizosphere soil and decreasing Cd contents in iron plaques on rice root surfaces confirmed that MP was an efficient immobilization agent for Cd pollutant in paddy soil. In the aspect of soil chemistry, the pH values of rhizosphere and non-rhizosphere soils had no statistical changes in the MP treatment groups, but their zeta potentials decreased obviously, indicating that MP could enhance the fixation or sorption of Cd on soil compositions. In the aspect of antioxidant system, MP could increase POD activity of rice roots significantly to alleviate the stress of Cd to roots, and resulted in the decrease of T-AOC, SOD, and CAT activities of rice roots of the selected cultivars. MP had no inhabitation or enhancement effects on TSH of rice roots but enhance the contents of MTs and NPT to binding Cd to complete detoxification process. MP as a novel and efficient immobilization agent could complete the remediation effects through soil chemistry and plant physiological mechanisms.
Sweet potato starch wastewater (SPSW) is an industrial food-processing waste product, which is a significant pollution source due to its high chemical oxygen demand (COD), nitrogen, and phosphorus loads. The influence of hydrolytic acidification (HA) process on C, N, and P as well as other main parameters were evaluated. It is essential to treat these wastewaters with effective methods such as HA, a general pretreatment application. In this study, we investigate the scientific link between the changes of different fractions of C, N, and P with particle size distribution in response to the newly introduced HA process. Results showed that the levels of COD, TN, and TP remained ultimately stable; pH and suspended solids (SSs) decreased obviously. HA process exhibits excellent capability of reducing the larger particulars (with diameter of >5 μm) into smaller ones (with diameter of <0.1 μm). The most significant initial concentration contribution to COD, TN, and TP pollution came from particles and matter with a diameter of >5 μm, at 41.8, 57.3, and 43.5%, respectively. While the most significant contribution to COD, TN, and TP was resulting from micro-molecular size particles (<0.1 μm) after 48 h. The smallest particles (<0.1 μm) were the most dominant contribution to all pollutants measured, with COD, TN, and TP contributions of 63.2, 50.4, and 59.3%, respectively. While the contribution of larger particles (particle size >5 μm) reduced to 10.2, 15.3, and 7.1%, respectively.
Environmental Science and Pollution Research - Phosphate amendments have been used to immobilize heavy metal-contaminated soils. However, phosphate amendments contain large amounts of phosphorus,... 相似文献
