金属改性对SAPO-34低温还原NO性能的影响

采用浸渍法制备金属改性SAPO-34分子筛催化剂,分析比较了不同单金属（Cu或Co）及不同比例双金属（Cu：Co=1：1、3：1、5：1,质量比）改性催化剂对NO的催化还原性能,评价了不同催化剂的N₂选择性,并采用扫描电子显微镜（SEM）、比表面积测试、X射线衍射分析（XRD）、NH₃-程序升温脱附（NH₃-TPD）等表征手段对催化剂的物化性能进行了分析.结果表明,单金属Cu改性催化剂具有较宽的温度区间,在250~450℃范围内NO的转化率始终保持在100%;双金属改性使NO转化率保持为100%的最低温度下降了25~50℃,显著拓宽了低温段窗口,其中,Cu₃Co₁/SAPO-34催化剂的低温催化还原性能最好,200℃即可实现100%的NO转化率,175℃下的转化率也高达80%以上.Cu-Co双金属改性SAPO-34分子筛催化剂具有优异的低温催化还原NO性能,具有在机动车尾气、工业废气的低温脱硝治理领域应用的潜力.     

Compositions and sources of organic acids in fine particles (PM2.5) over the Pearl River Delta region, south China

Organic acids as important constituents of organic aerosols not only influence the aerosols' hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14–C32fatty acids, C4–C9dicarboxylic acids and aromatic acids in PM2.5collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14–C32fatty acids, aromatic acids and C4– C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20–C32fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while C14–C18fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4–C9dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14–C32fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14–C18fatty acids were attributed to anthropogenic sources, about 50%–85% of the C20–C32fatty acids were attributed to natural sources, 80%–95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.     

Evaluating the difference between the normalized difference vegetation index and net primary productivity as the indicators of vegetation vigor assessment at landscape scale

Both the net primary productivity (NPP) and the normalized difference vegetation index (NDVI) are commonly used as indicators to characterize vegetation vigor, and NDVI has been used as a surrogate estimator of NPP in some cases. To evaluate the reliability of such surrogation, here we examined the quantitative difference between NPP and NDVI in their outcomes of vegetation vigor assessment at a landscape scale. Using Landsat ETM+ data and a process model, the Boreal Ecosystem Productivity Simulator, NPP distribution was mapped at a resolution of 90 m, and total NDVI during the growing season was calculated in Heihe River Basin, Northwest China in 2002. The results from a comparison between the NPP and NDVI classification maps show that there existed a substantial difference in terms of both area and spatial distribution between the assessment outcomes of these two indicators, despite that they are strongly correlated. The degree of difference can be influenced by assessment schemes, as well as the type of vegetation and ecozone. Overall, NDVI is not a good surrogate of NPP as the indicators of vegetation vigor assessment in the study area. Nonetheless, NDVI could serve as a fairish surrogate indicator under the condition that the target region has low vegetation cover and the assessment has relatively coarse classification schemes (i.e., the class number is small). It is suggested that the use of NPP and NDVI should be carefully selected in landscape assessment. Their differences need to be further evaluated across geographic areas and biomes.     

Diversity of antibiotic resistance genes and encoding ribosomal protection proteins gene in livestock waste polluted environment

The rapid development and increase of antibiotic resistance are global phenomena resulting from the extensive use of antibiotics in human clinics and animal feeding operations. Antibiotics can promote the occurrence of antibiotic resistance genes (ARGs), which can be transferred horizontally to humans and animals through water and the food chain. In this study, the presence and abundance of ARGs in livestock waste was monitored by quantitative PCR. A diverse set of bacteria and tetracycline resistance genes encoding ribosomal protection proteins (RPPs) from three livestock farms and a river were analyzed through denaturing gradient gel electrophoresis (DGGE). The abundance of sul(I) was 10³ to 10⁵ orders of magnitude higher than that of sul(II). Among 11 tet-ARGs, the most abundant was tet(O). The results regarding bacterial diversity indicated that the presence of antibiotics might have an evident impact on bacterial diversity at every site, particularly at the investigated swine producer. The effect of livestock waste on the bacterial diversity of soil was stronger than that of water. Furthermore, a sequencing analysis showed that tet(M) exhibited two genotypes, while the other RPPs-encoding genes exhibited at least three genotypes. This study showed that various ARGs and RPPs-encoding genes are particularly widespread among livestock.     

Fenton氧化-序批式膜生物反应器耦合处理干法腈纶废水

采用Fenton氧化-序批式膜生物反应器(SBMBR)组合工艺处理干法腈纶废水。结果表明,在废水初始pH值为3.0,H2O2投加量为90.0 mmol/L,Fe2+投加量为20.0 mmol/L,反应时间为2.0 h的条件下,Fenton氧化预处理对腈纶生产废水的COD去除率达到47.0%以上,COD由1 091 mg/L降至560 mg/L,废水的BOD5/COD由0.32升至0.69,废水的可生化性得到显著提高。Fenton处理出水与丙烯腈废水等比例混合后,采用SBMBR进行生化处理,在水力停留时间为24 h,90 min缺氧/150 min好氧交替运行的条件下,COD、NH4+-N和TN的平均去除率分别为71.7%、97.2%和47.4%,碳源不足是限制TN去除效果的主要影响因素。在无外加碳源的条件下,组合工艺处理后出水COD和NH4+-N浓度分别为117 mg/L和1.7 mg/L,出水水质可以稳定达到国家一级排放标准(GB8978-1996)。     

中山市旱季霾特征及数值模拟分析

利用观测数据、Hysplit后向轨迹模式以及WRF-CMAQ模式对中山市旱季霾特征进行模拟分析.中山市霾污染的天气形势以大陆高压型为主.当相对湿度在71%~90%时,气溶胶浓度和能见度的负相关性最显著,且当能见度减小到5 km以下时,PM_(2.5)浓度的大幅减小才能使能见度略有好转.最有可能引起中山发生霾天气的两条污染带,一条是沿中山至湖南南部,另一条是沿中山到粤东地区.WRF-CMAQ模式能较好地模拟出2014年1月份中山PM_(2.5)浓度、能见度的变化趋势以及广东省区域内灰霾的污染过程.在气溶胶质量权重及消光贡献中,硫酸盐的比重最高,在高相对湿度下,二次气溶胶的消光权重超过80%.通过中山PM_(2.5)过程分析发现,在霾过程,无冷空气时PM_(2.5)主要来自气溶胶反应、排放源和水平平流,贡献率分别为35%、15%和10%,有冷空气时水平平流的贡献最大,达37%;在清洁过程,无冷空气时气溶胶主要靠水平平流和干沉降清除,贡献率分别为-39%和-14%,有冷空气时清除以水平平流和垂直对流、扩散为主,贡献率分别为-29%和-25%,说明不同天气条件下霾的污染和清洁机制有着明显差别.     

电子元件制造行业典型危险废物产生节点及处置建议

电子元件制造行业是国家战略性新兴行业,同时也是高污染的行业,其生产工艺具有更新换代快、中间产物多、排污方式复杂等特点.行业危险废物也具有来源多、成分复杂、产生量大等特点,若未经妥善处置而排放到环境中,会对环境造成巨大的危害.通过对印制电路板、铝电解电容器、半导体器件3类典型电子元件的工艺流程进行梳理,分析典型危险废物的...     

新型锌／铜／铝类水滑石的合成及对模拟印染废水吸附性能的研究

采用低饱和共沉淀法制得锌／铜／铝类水滑石化合物（Zn5CuAl2（OH）16CO3·xH2O）,在450℃焙烧得焙烧物,通过XRD ,FT－IR ,SEM和TG－DSC等手段对样品的结构、形貌和热稳定性进行了分析。将其焙烧物用于吸附模拟印染废水中的阴离子染料活性艳橙,结果表明,pH值在2～9,经吸附90 min ,其对印染废水的吸附性能最佳,染料去除率达96％以上。     

二英类污染物生物分析方法研究进展

二英类物质具有致癌、致畸等毒理及健康效应.我国二英类物质污染源较多,分布较为广泛,因此二英监测任务十分紧迫.但是我国二英实验室相对较少,单纯的仪器分析方法不能满足监测需求,因此急需发展经济、简便、快速的生物检测方法.生物检测方法主要包含免疫类检测方法和基于芳香烃受体(AhR)信号通路的检测方法,本文着重对这两类生物检测方法的原理和进展等进行综述.     

Efficient photoelectrochemical oxidation of rhodamine B on metal electrodes without photocatalyst or supporting electrolyte

We designed photoelectrochemical cells to achieve efficient oxidation of rhodamine B (RhB) without the need for photocatalyst or supporting electrolyte. RhB, the metal anode/cathode, and O₂ formed an energy-relay structure, enabling the efficient formation of O ₂ ^– species under ultraviolet illumination. In a single-compartment cell (S cell) containing a titanium (Ti) anode, Ti cathode, and 10 mg·mL^–1 RhB in water, the zero-order rate constant of the photoelectrochemical oxidation (k_PEC) of RhB was 0.049 mg·L^–1·min^–1, while those of the photochemical and electrochemical oxidations of RhB were nearly zero. k_PEC remained almost the same when 0.5 mol·L^–1 Na₂SO₄ was included in the reactive solution, regardless of the increase in the photocurrent of the S cell. The k_PEC of the illuminated anode compartment in the two-compartment cell, including a Ti anode, Ti cathode, and 10 mg·mL^–1 RhB in water, was higher than that of the S cell. These results support a simple, eco-friendly, and energysaving method to realize the efficient degradation of RhB.

Open image in new window