公共资源与最优产权选择

公共资源是指在产权界定过程中，资源所有者被迫放弃或者没有进行产权界定的资源部分,而产权界定本质上是划分公共资源归属权的过程。根据组织对公共资源控制权的性质，将其分为两类——组织间公共资源和组织内公共资源，并据此将产权界定、生产和交易纳入同一个分析框架中。通过分析，认为随着公共资源范围的变化，不同产权形成一个相互联系和转化的系列，即从资源非稀缺条件下的纯公共产权到资源全为废弃物的纯公共产权系列；不可交易的所有权是产权系列中的特殊形式，私人产权和俱乐部产权是这一系列中的过渡形式；组织内和组织间的均衡博弈结构决定最优产权的具体选择形式。     

外源稀土La在沉积物中的形态及其生物可利用性

将沉积物中的外源稀土La分为可溶解态、酸可提取态、有机质及硫化物结合态,研究了小球藻(Chlorella Vulgaris Beijerinck)对这三种形态La的生物可利用性.研究结果表明:这三种形态的La在沉积物中的含量与其在藻中的含量有很好的相关关系.其中可溶解态La的生物可利用性最大,这说明,沉积物中La的释放对其生物可利用性至关重要.     

Promotion of hexadecyltrimethyleamine bromide to the damage of Alexandrium sp. LC3 by cupric glutamate

The effect of hexadecyltrimethyleamine bromide （HDTMAB） on the removal of A lexandrium sp. LC3 under cupric glutamate stress was investigated. Toxic effect of cupric glutamate on A lexandrium sp. LC3 was significantly promoted in the presence of HDTMAB, especially at 3.0 cmc of HDTMAB. It was found that the sulfhydryl group content of the cell decreased, while the malonaldehyde content and membrane permeability increased when A lexandrium sp. LC3 was treated with HDTMAB and cupric glutamate complex, compared with cupric glutamate alone. The data suggest that HDTMAB might stimulate the damage of A lexandrium sp. LC3 by enhancing the membrane permeability.     

HSE作业检查表在WR-MSR采集系统中的应用

HSE作业检查表是HSE管理体系文件中最基础的文件,是基层组织结合具体施工作业的个案和所处环境的特定条件,为符合甲方的HSE管理要求,在进入现场作业前所编制的HSE具体作业检查表格.作业检查表是现有的岗位操作规程的支持性文件,它所涉及的项目是对作业过程中的危险点源和风险隐患进行分析,转化为各岗位的重点检查任务.认真执行作业检查表,对强化职工责任意识,督促规章制度的自觉执行,预防事故发生都起到重要作用.     

Partitioning and removal of dioxin-like congeners in flue gases treated with activated carbon adsorption

Activated carbon adsorption is commonly used to control dioxin-like congener (PCDD/Fs and PCBs) emissions. Partitioning of PCDD/Fs and PCBs between vapor and solid phases and their removal efficiencies achieved with existing air pollution control devices (APCDs) at a large-scale municipal waste incinerator (MWI) and an industrial waste incinerator (IWI) are evaluated via intensive stack sampling and analysis. Those two facilities investigated are equipped with activated carbon injection (ACI) with bag filter (BF) and fixed activated carbon bed (FACB) as major PCDD/F control devices, respectively. Average PCDD/F and PCB concentrations of stack gas with ACI+BF as APCDs are 0.031 and 0.006ng-TEQ/Nm(3), and that achieved with FACB are 1.74 and 0.19ng-TEQ/Nm(3) in MWI and IWI, respectively. The results show that FACB could reduce vapor-phase PCDD/Fs and PCBs concentrations in flue gas, while the ACI+BF can effectively adsorb the vapor-phase dioxin-like congener and collect the solid-phase PCDD/Fs and PCBs in the meantime. Additionally, the results of the pilot-scale adsorption system (PAS) experimentation indicate that each gram activated carbon adsorbs 105-115ng-PCDD/Fs and each surface area (m(2)) of activated carbon adsorbs 10-25ng-PCDD/Fs. Based on the results of PAS experimentation, this study confirms that the surface area of mesopore+macropore (20-200A) of the activated carbon is a critical factor affecting PCDD/F adsorption capacity.     

Removal of cyanobacterial blooms in Taihu Lake using local soils. I. Equilibrium and kinetic screening on the flocculation of Microcystis aeruginosa using commercially available clays and minerals

Algal removal abilities of 26 clays/minerals were classified into three categories according to the 8-h equilibrium removal efficiency (Q8h) and removal rate at a clay loading of 0.7 g/L. Type I clays (sepiolite, talc, ferric oxide, and kaolinite) had a Q8h > 90%, a t50 (time needed to remove 50% of the algae) < 15 min, and a t80 < 2.5 h. Type II clays (6 clays) had a Q8h 50-90%, a t50 < 2.5 h, and a t80 > 2.5 h. Type III clays (14 clays) with Q8h < 50%, t50 > 8 h and t80 > 14 h had no practical value in removal of algal blooms. When the clay loading was reduced to 0.2 g/L, Q8h for all the 25 materials decreased to below 60%, except for sepiolite whose Q8h remained about 97%. The high efficiency for sepiolite to flocculate M. aeruginosa cells in freshwaters was due to the mechanism of netting and bridging effect.     

冻融循环作用后钢筋混凝土电化学除氯效果研究∗

为探究盐冻环境钢筋混凝土结构经电化学除氯后的残余氯离子分布规律,本文设计快速冻融试验,对冻融循环作用后的钢筋混凝土开展电化学除氯试验,研究冻融循环次数、除氯时间和粉煤灰掺量等因素对钢筋混凝土电化学除氯效果的影响。研究表明,粉煤灰混凝土电化学除氯效率受冻融循环作用影响和粉煤灰二次水化的共同影响,冻融循环作用引起的混凝土性能劣化导致电化学除氯后混凝土内残余氯离子呈凸型分布,集聚在距混凝土表面 15~25 mm 范围,钢筋附近残余氯离子含量最低。结果表明,冻融循环作用会引起混凝土电化学平均除氯效率上升,相较于未冻融试件,冻融循环作用 100 次的试件上升约 12.5%;随电化学除氯时间增加,平均除氯效率会增大,混凝土内残余氯离子含量下降和外迁总量正相关;随粉煤灰掺量增加,混凝土电化学除氯效率增大,掺 10%、 20%、30% 的粉煤灰混凝土,其 28 d 平均除氯效率分别达到 51.2%、54.5%、59.9%。     

光催化功能材料及其提升湖库水环境质量的验证研究

为验证石墨烯基氧化钛光催化功能材料在实际工况条件下的适用性及其对污染水体的净化效果,分别选择云南省大理州西湖(ST-1)及浙江省舟山市嵊泗县的长弄塘水库(ST-2)进行为期105～107 d的野外原位围隔试验验证研究.结果表明:光催化功能材料与土著生物耦合(光催化耦合生态净化技术)对2种类型水体中污染物降解具有较好的效...     

光活性二氧化钛膜的制备方法

近二十年来发展起来的光催化技术可利用太阳光能对水体中的多种有机污染物进行降解．这符合可持续发展的长远需要,具有诱人的发展前景。光催化技术利用可再生的清洁资源,氧化能力强．适用于广谱有机物,能使难被一般氧化剂氧化、又难生物降解的污染物降解．是当前太阳能利用及水污染控制方面开辟的前沿领域．在治理环境污染方面具有明显的发展优势。本文以溶胶-凝胶法、金属有机化学气相淀积、煅烧沉淀法等多种方法制备光活性二氧化钛膜。     

基于事故序列图的大型油轮原油泄漏事故风险研究

美国海岸警卫队在利用IRA评估其装备总体风险的过程中,充分运用事故序列图帮助分析人员从整体层面认识事故、灾难从产生到发展的过程,查找事故中的各个要素,分析各要素在事故演变过程中的作用和影响。针对我国大型油轮原油泄漏事故风险日益增加的现状,介绍了事故序列图分析事故的原理,并结合典型事故案例,给出了防止大型油轮发生原油泄漏事故的措施,以及减轻事故影响的方法。