A review of atmospheric mercury emissions,pollution and control in China

Mercury, as a global pollutant, has significant impacts on the environment and human health. The current state of atmospheric mercury emissions, pollution and control in China is comprehensively reviewed in this paper. With about 500-800 t of anthropogenic mercury emissions, China contributes 25%-40% to the global mercury emissions. The dominant mercury emission sources in China are coal combustion, non-ferrous metal smelting, cement production and iron and steel production. The mercury emissions from natural sources in China are equivalent to the anthropogenic mercury emissions. The atmospheric mercury concentration in China is about 2-10 times the background level of North Hemisphere. The mercury deposition fluxes in remote areas in China are usually in the range of 10-50μg·m^-2·yr^-1. To reduce mercury emissions, legislations have been enacted for power plants, non-ferrous metal smelters and waste incinerators. Currently mercury contented in the flue gas is mainly removed through existing air pollution control devices for sulfur dioxide, nitrogen oxides, and particles. Dedicated mercury control technologies are required in the future to further mitigate the mercury emissions in China.     

铬离子对藻类生长的影响

利用自然光照条件,在不同铬离子质量浓度下,对5种藻类的生长进行了实验研究.研究结果表明:5种藻类在不同的光波长下,其吸收光谱存在两个最强的吸收区: 420～440 nm的蓝紫光部分和660 nm 的红光部分;在不同铬离子质量浓度0～20.63 mg·L-1范围内,5种藻类生长受到不同程度的抑制,其耐受性也尽不相同,经过分析和比较后得出5种藻类对铬的耐受性大小顺序为:微囊藻(Microcystis)＞水华鱼腥藻(Anabaena flos-aquae)＞细长聚球藻(Synechococcus elongatus)＞斜生栅藻(Scenedesmus obliquus)＞蛋白核小球藻(Chlorella pyrenoidose).     

Effects of an iron-silicon material,a synthetic zeolite and an alkaline clay on vegetable uptake of As and Cd from a polluted agricultural soil and proposed remediation mechanisms

Economic and highly effective methods of in situ remediation of Cd and As polluted farmland in mining areas are urgently needed. Pot experiments with Brassica chinensis L. were carried out to determine the effects of three soil amendments [a novel iron-silicon material (ISM), a synthetic zeolite (SZ) and an alkaline clay (AC)] on vegetable uptake of As and Cd. SEM–EDS and XRD analyses were used to investigate the remediation mechanisms involved. Amendment with ISM significantly reduced the concentrations of As and Cd in edible parts of B. chinensis (by 84–94 % and 38–87 %, respectively), to levels that met food safety regulations and was much lower than those achieved by SZ and AC. ISM also significantly increased fresh biomass by 169–1412 % and 436–731 % in two consecutive growing seasons, while SZ and AC did not significantly affect vegetable growth. Correlation analysis suggested that it was the mitigating effects of ISM on soil acidity and on As and Cd toxicity, rather than nutrient amelioration, that contributed to the improvement in plant growth. SEM–EDS analysis showed that ISM contained far more Ca, Fe and Mn than did SZ or AC, and XRD analysis showed that in the ISM these elements were primarily in the form of silicates, oxides and phosphates that had high capacities for chemisorption of metal(loid)s. After incubation with solutions containing 800 mg L^?1 AsO₄ ^2? or Cd²⁺, ISM bound distinctly higher levels of As (6.18 % in relative mass percent by EDS analysis) and Cd (7.21 % in relative mass percent by EDS analysis) compared to SZ and AC. XRD analysis also showed that ISM facilitated the precipitation of Cd²⁺ as silicates, phosphates and hydroxides, and that arsenate combined with Fe, Al, Ca and Mg to form insoluble arsenate compounds. These precipitation mechanisms were much more active in ISM than in SZ or AC. Due to the greater pH elevation caused by the abundant calcium silicate, chemisorption and precipitation mechanisms in ISM treatments could be further enhanced. That heavy metal(loid)s fixation mechanisms of ISM ensure the remediation more irreversible and more resilient to environmental changes. With appropriate application rate and proper nutrients supplement, the readily available and economic ISM is a very promising amendment for safe crop production on multi-metal(loids) polluted soils.     

南京市蔬菜中滴滴涕和六六六的残留及摄食暴露分析

为研究有机氯农药在食物中的残留及人群的摄食暴露,在2015年5月采集了南京市居民普遍食用的10种蔬菜,利用气相色谱-质谱联用仪(GC-MS)进行检测。研究表明滴滴涕(DDTs)和六六六(HCHs)在蔬菜中均有检出,∑DDTs的残留量为1.78~5.29 ng·g~(-1),∑HCHs的残留量为0.21~4.77 ng·g~(-1),其中∑10OCPs(有机氯农药)含量最高的蔬菜是藕(10.07 ng·g~(-1)),含量最低的是青菜(2.32 ng·g~(-1))。通过来源分析发现,蔬菜中DDTs可能有新的输入,而HCHs则主要源于历史残留。通过对不同人群的每日摄取量(EDI)进行摄食暴露分析发现,儿童的摄食暴露量要高于同性别其他年龄段人群,在儿童和未成年阶段,男性的暴露量普遍高于女性,而在成年和老年阶段,男性的暴露量低于女性。平均而言,各年龄段人群对γ-HCH和DDTs的日均口摄暴露量(EDI)值远低于联合国粮农组织和世界卫生组织(FAO/WHO)所规定的ADI值,表明在目前蔬菜消费量下,南京市居民通过摄入蔬菜引起的健康风险水平较低。     

基于集装化外运与综合型处理的上海城市生活垃圾管理对策

分析了上海市区生活垃圾收运处理现状与问题,借鉴国外特大城市生活垃圾收运处理管理经验和教训,提出了将现有垃圾水运系统升级改造为集装化水陆联运系统、将现有老港废弃物处置场扩建为生活垃圾分类、生化处理、焚烧发电、填埋等多种技术有机组合的综合型处理基地的方案,为改善上海市生活垃圾收运与处理处置系统提出可行的对策建议.     

铬渣的热解无害化处理

采用热解工艺无害化处理铬渣,探讨了稻秆在铬渣无害化处理中的作用.研究了热解温度、稻秆与铬渣质量比、铬渣粒径及保温时间对铬渣热解无害化处理的影响,并分析了热解前后热解产物中铬元素形态的变化.结果表明,热解工艺能有效地将铬渣中Cr(Ⅵ)还原,稻秆热解过程中产生的气相挥发分对Cr(Ⅵ)的还原起核心作用.较为适宜的热解条件:热解温度为400 ℃,稻秆与铬渣质量比为0.10,铬渣粒径<2 000 μm,保温时间为10 min.在该热解条件处理下,热解产物中的Cr(Ⅵ)质量浓度为121 mg/kg,低于热解前铬渣中的Cr(Ⅵ)(3 400 mg/kg).热解后,可交换态及碳酸盐结合态铬含量降低,大部分铬转化成了稳定的有机结合态和残渣态,极大地降低了铬渣的危害.第一作者:张大磊,男,1982生,博士研究生,研究方向为固体废弃物热处理.     

投加聚氨酯泡沫微生物固定化载体的SBBR脱氮除磷实验研究

研究投加聚氨酯泡沫微生物固定化载体的SBBR脱氮除磷效果及机理.在SBR中填充聚氨酯泡沫微生物固定化载体,形成序批式生物膜反应器(SBBR).SBBR以实际生活污水为处理对象,在A/O运行工况下对微生物进行培养驯化,并在SBBR运行稳定时研究其脱氮除磷效果.研究结果表明,SBBR中的聚氨酯泡沫微生物固定化载体在空间上形...     

Enhanced activation of peroxymonosulfate by CNT-TiO2 under UV-light assistance for efficient degradation of organic pollutants

CNT-TiO₂ composite is used to activate PMS under UV-light assistance. Superior performance is due to the enhanced electron-transfer ability of CNT. SO₄•⁻, •OH and ¹O₂ play key roles in the degradation of organic pollutants. In this work, a UV-light assisted peroxymonosulfate (PMS) activation system was constructed with the composite catalyst of multi-walled carbon nanotubes (CNT) - titanium dioxide (TiO₂). Under the UV light irradiation, the photoinduced electrons generated from TiO₂ could be continuously transferred to CNT for the activation of PMS to improve the catalytic performance of organic pollutant degradation. Meanwhile, the separation of photoinduced electron-hole pairs could enhance the photocatalysis efficiency. The electron spin resonance spectroscopy (EPR) and quenching experiments confirmed the generation of sulfate radical (SO₄•⁻), hydroxyl radical (•OH) and singlet oxygen (¹O₂) in the UV/PMS/20%CNT-TiO₂ system. Almost 100% phenol degradation was observed within 20 min UV-light irradiation. The kinetic reaction rate constant of the UV/PMS/20%CNT-TiO₂ system (0.18 min⁻¹) was 23.7 times higher than that of the PMS/Co₃O₄ system (0.0076 min⁻¹). This higher catalytic performance was ascribed to the introduction of photoinduced electrons, which could enhance the activation of PMS by the transfer of electrons in the UV/PMS/CNT-TiO₂ system.     

Kinetics of phenol and chlorophenol utilization by Acinetobacter species

Although microbial transformations via cometabolism have been widely observed, the few available kinetic models of cometabolism have not adequately addressed the case of inhibition from both the growth and nongrowth substrates. The present study investigated the degradation kinetics of self-inhibitory growth (phenol) and nongrowth (4-chlorophenol, 4-CP) substrates, present individually and in combination. Specifically, batch experiments were performed using an Acinetobacter isolate growing on phenol alone and with 4-CP present. In addition, batch experiments were also performed to evaluate the transformation of 4-CP by resting, phenol-induced Acinetobacter cultures. The Haldane kinetic model adequately predicted the biodegradation of phenol alone, although a slight discrepancy was noted in cases of higher initial phenol concentrations. Similarly, a Haldane model for substrate utilization was also able to describe the trends in 4-CP transformation by the resting cell cultures. The 4-CP transformation by the Acinetobacter species growing on phenol was modeled using a competitive kinetic model of cometabolism, which included growth and nongrowth substrate inhibition and cross-inhibition terms. Excellent agreement was obtained between the model predictions using experimentally estimated parameter values and the experimental data for the synchronous disappearance of phenol and 4-CP.     

剩余污泥对活性黑KN-B的吸附性能

用剩余污泥对活性黑KN-B进行吸附研究,考察了pH、吸附时间、温度、盐类和污泥量等对活性黑KN-B吸附的影响.结果表明,剩余污泥对活性黑KN-B的吸附是一个快速过程,吸附时间可控制在30 min;其吸附过程可以用准二级动力学模型进行描述和预测;温度对污泥吸附活性黑KN-B产生的影响较小;其吸附等温线,25℃、35℃时与Freundlich方程拟合良好,45℃时则可以由Langmuir方程更好地描述.未调pH的剩余污泥,对pH≤2的废水中活性黑KN-B吸附性能良好;剩余污泥pH为1时,对pH＜12的废水中活性黑KN-B均可有效吸附;氯化钠浓度低于500 mg/L或氯化钠和硫酸钠的混合盐浓度低于100 mg/L时,有利于吸附;氯化钠浓度高于500 mg/L、混合盐浓度高于100 mg/L或单独加入硫酸钠后,随盐浓度的增加,吸附量呈下降趋势.