Dechlorination of PCBs in the simulative transformer oil by microwave-hydrothermal reaction with zero-valent iron involved

The conventional hydrothermal reaction with iron powder, NaOH and H₂O as reactants was reported to occur at temperature above 423 K, and iron oxides (Fe₃O₄ and NaFeO₂) and hydrogen were produced. In this study, microwave heating was adopted to take the place of conventional heating to induce the hydrothermal reaction. Under microwave irradiation, NaOH and H₂O absorbed microwave energy by space charge polarization and dipolar polarization and instantly converted it into thermal energy, which initiated the hydrothermal reaction that involved with zero-valent iron. X-ray diffraction (XRD) analysis found Fe₃O₄/NaFeO₂ and confirmed the occurrence of microwave-induced hydrothermal reaction. The developed microwave-hydrothermal reaction was employed for the dechlorination of PCBs. Hexadecane containing 100 mg L⁻¹ of Aroclor1254 was used as simulative transformer oil, and the dechlorination of PCBs was evaluated by GC/ECD, GC/MS and ion chromatography. For PCBs in 10 mL simulative transformer oil, almost complete dechlorination was achieved by 750 W microwave irradiation for 10 min, with 0.3 g iron powder, 0.3 g NaOH and 0.6 mL H₂O added. The effects of important factors including microwave power and the amounts of reactants added, on the dechlorination degree were investigated, moreover, the dechlorination mechanism was suggested. Microwave irradiation combined with the common and cheap materials, iron powder, NaOH and H₂O, might provide a fast and cost-effective method for the treatment of PCBs-containing wastes.     

Biotoxicity of nickel oxide nanoparticles and bio-remediation by microalgae Chlorella vulgaris

Adverse effects of manufactured nickel oxide nanoparticles on the microalgae Chlorellavulgaris were determined by algal growth-inhibition test and morphological observation via transmission electron microscopy (TEM). Results showed that the NiO nanoparticles had severe impacts on the algae, with 72 h EC(50) values of 32.28 mg NiOL(-1). Under the stress of NiO nanoparticles, C. vulgaris cells showed plasmolysis, cytomembrane breakage and thylakoids disorder. NiO nanoparticles aggregated and deposited in algal culture media. The presence of algal cells accelerated aggregation of nanoparticles. Moreover, about 0.14% ionic Ni was released when NiO NPs were added into seawater. The attachment of aggregates to algal cell surface and the presence of released ionic Ni were likely responsible for the toxic effects. Interestingly, some NiO nanoparticles were reduced to zero valence nickel as determined by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis. The maximum ratios of nickel reduction was achieved at 72 h of exposure, in accordance with the time-course of changes in soluble protein content of treated C. vulgaris, implying that some proteins of algae are involved in the process. Our results indicate that the toxicity and bioavailability of NiO nanoparticles to marine algae are reduced by aggregation and reduction of NiO. Thus, marine algae have the potential for usage in nano-pollution bio-remediation in aquatic system.     

Use of reporter-gene based bacteria to quantify phenanthrene biodegradation and toxicity in soil

A phenanthrene-degrading bacterium, Sphingomonas paucimobilis EPA505 was used to construct two fluorescence-based reporter strains. Strain D harboring gfp gene was constructed to generate green fluorescence when the strain started to biodegrade phenanthrene. Strain S possessing gef gene was designed to die once phenanthrene biodegradation was initiated and thus to lose green fluorescence when visualized by a live/dead cell staining. Confocal laser scanning microscopic observation followed by image analysis demonstrates that the fluorescence intensity generated by strain D increased and the intensity by strain S decreased linearly at the phenanthrene concentration of up to 200 mg/L. Such quantitative increase and decrease of fluorescence intensity in strain D (i.e., from 1 to 11.90 ± 0.72) and strain S (from 1 to 0.40 ± 0.07) were also evident in the presence of Ottawa sand spiked with the phenanthrene up to 1000 mg/kg. The potential use of the reporter strains in quantitatively determining biodegradable or toxic phenanthrene was discussed.     

Comparison of semi-aerobic and anaerobic degradation of refuse with recirculation after leachate treatment by aged refuse bioreactor

Two fresh refuse bioreactors (F1 and F2) were operated under semi-aerobic and anaerobic conditions, respectively. The leachate from the bioreactors F1 and F2 was introduced into the aged refuse bioreactors (A1 and A2), and the effluent from A1 and A2 was subsequently recirculated into F1 and F2, respectively. The effect of the semi-aerobic recirculation process on refuse degradation was investigated, comparing it with that of the anaerobic recirculation process. Results indicate that the semi-aerobic recirculation process can increase the accumulated net production of leachate and promote evaporation. The accumulated net production of refuse in F1 is 320 mL/kg and that of F2 is 248 mL/kg, with leachate reduction amounting to 315 and 244 mL/kg refuse, respectively. The leachate quantity reduction of semi-aerobic and anaerobic leachate recirculation process accounted for 98.4% and 98.3% of the accumulated net production of leachate, respectively. The semi-aerobic leachate recirculation process can improve the biodegradation of organic matter from fresh refuse and the reduction rate of the pollutant concentration in leachate. This should shorten considerably the time required to meet the discharge standard and the time of stabilization of the refuse as observed in the anaerobic recirculation process. It was predicted that the COD concentration of leachate from the anaerobic recirculation process would reach 1000 mg/L in the anaerobic recirculation process after 2.2 years, as for semi-aerobic leachate recirculation process it is about 100 days. Compared with anaerobic recirculation process, the semi-aerobic recirculation process is more effective on NH₃-N transformation and TN removal. The NH₃-N and TN concentration of F1 is far below those of F2 at the end of our experiment. Refuse settlement in the semi-aerobic recirculation process was faster than that in the anaerobic recirculation process. At the end of the experiment, refuse settlement ratios in the semi-aerobic and anaerobic bioreactors were 33.5% and 18%, respectively.     

Impacts of invasive plants on ecosystems in natural reserves in Jiangsu of China

To estimate the impacts of invasive plants on ecosystems, a survey has been conducted in three sites including both buffer zones and core zones. 13, 19 species are found in the Yuntai Mountain and Longchi Mountain natural reserve respectively, and 23 in the Purple Mountain Natural Park. Altogether 25 species belonging to 12 families, the majority of which are native to North America, some of them have set up stable reproducible populations. Among them, Solidago canadensis is found in Longchi Mountain and Purple Mountain. Communities of Galinsoga parviflora, Gynura crepidioides, Ageratum conyzoides, and Ambrosia artemisiifolia pose a serious threat to local biodiversity.     

不同培养条件下锰过氧化物酶(MnP)的合成及其对甲基橙的降解

高效、大规模、低成本合成木质素降解酶是直接采用其降解难降解有机污染物所必须解决的问题.对锰过氧化物酶(MnP)降解甲基橙和在非灭菌的反应器中连续合成MnP的可行性进行考察.结果表明,在采用2 mmol H2O2和1.5 mmol MnSO4的降解体系中,获最大脱色效果,且100、200和300 U/L的MnP可在8h内将甲基橙分别脱色18％、23％和35％;在非灭菌的反应器水平上实现了固定化培养的P.chrysosporium连续23 d合成MnP,但MnP酶活仅为2～ 23 U/L,难以酶解甲基橙;然而,在摇瓶培养条件下固定化的P.chrysosporium合成的MnP却能达1 152 U/L.因此,直接采用MnP对污染物进行降解以及在非灭菌的反应器中持续合成MnP是可行的,但就在非灭菌条件下如何提高MnP的合成量还有待开展深入的研究.     

2008年江苏持续性降雪中的水汽和动力抬升机制分析

2008年1月下旬江苏省出现了历史罕见的持续性暴雪过程,研究发现,降雪量的大小与低空急流的日变化相对应,暴雪过程中700 hPa西南急流对水汽的输送起着重要的作用,作为大尺度天气系统,700 hPa急流的加速发生在降雪量增大之前,其值阈大小与6 h降雪量之间没有对应关系,急流减弱在暴雪结束以后;降雪的发生和发展与南北风的增大和冷暖平流有关,低层偏北风作为冷垫对暖湿气流的抬升和水汽的凝结起到了一定的作用;江苏降雪过程中水汽主要来源于700～500 hPa,低层东风气流对黄海南部的水汽输送非常有限;强降雪的发生与700 hPa水汽通量散度相对应,水汽通量散度辐合增大,降雪量增大;在降雪过程中垂直运动对降雪量的大小有很好的指示意义。     

The Dual Model for Tourism Resource Productivity Improvement

For natural resource science, resource productivity studying is an important subject. But researches on tourism resource productivity are limited. The most significant influencing factor on tourism resource productivity is the potential market scale of tourist locations, and second most important influencing factor is the resource endowment. Regional urban population is significantly correlated with region tourist numbers, being the decisive factor of region potential tour market scale. In tourism development, the dual model should be adopted: on one hand to enhance tour spot attractiveness, on the other hand to cultivate the potential market by improving urbanization level and other means. In the situation of tourism development fever spreading, the dual model for improving tourism productivity helps to avoid the "Great Leap Forward" which means that too rapid tourism construction divorces from actual market demand.     

干旱区2种猪毛菜萌发过程对水盐胁迫的生态响应

在实验室内模拟研究的基础上,运用生理生态学的原理,研究了水盐胁迫对钠猪毛菜(salsola nitraria)和散枝猪毛菜(salsola brachiata)种子萌发的影响,结果显示,钠猪毛菜与散枝猪毛菜种子萌发的最适温度分别为25 ℃和15 ℃.在盐溶液和PEG溶液中,2种种子的萌发规律相似,即随着水势的降低,萌发率和萌发速率下降.在盐胁迫下钠猪毛菜和散枝猪毛菜种子萌发的最低水势接近-7.2 MPa;在水分胁迫下2种种子萌发的最低水势均未超过-2.0 MPa,其中,钠猪毛菜种子表现出较强的耐水分胁迫能力.在相同水势条件下,PEG对2种猪毛菜种子萌发的抑制程度显著大于等渗NaCl,说明渗透胁迫是影响2种植物种子萌发的主要因素.     

作业机液压系统问题调查与技改

针对油田井下作业机液压系统存在液压管钳伤人、无效功耗、污染环境等问题,通过现场调查研究,得出系统存在无效运转的相关数据,找到了液压系统存在的结构问题,制定液压泵随机驱动技术改造方案,对改造前后功耗数据进行了对比,分析了技改后的安全环保效果。