The influence of Chinese population policy change on resources and the environment

Universal two-child policy has been implemented since the end of 2015 in China. This policy is anticipated to bring a significant increase in the total population, with profound influences on the resources and environment in the future. This paper analyzes the changing dynamics of urban and rural population, and forecasts urban and rural population from 2016 to 2030 at national and provincial scale using a double log linear regression model. Drawing upon the results of these two predictions, the impact of the population policy change on Chinese resources consumption and environmental pollution are predicted quantitatively. Given the future total population maintains current levels on resources consumption and environmental emission, the additional demand of resources and environment demand for the new population is forecasted and compared against the capacity on supply side. The findings are as follows: after implementing the universal two-child policy, China’s grain, energy consumption, domestic water demand, and pollutant emissions are projected to increase at different rates across provinces. To meet the needs arising from future population growth, food and energy self-sufficiency rate will be significantly reduced in the future, while relying more on imports. Stability of the water supply needs to be improved, especially in Beijing, Henan, Jiangsu, Qinghai, and Sichuan where the gap in future domestic water demand is comparatively larger. Environmental protection and associated governing capability are in urgent need of upgrade not least due to the increasing pressure of pollution.     

Continuous measurement of peroxyacetyl nitrate (PAN) in suburban and remote areas of western China

Knowledge on atmospheric abundance of peroxyacetyl nitrate (PAN) is important in assessing the severity of photochemical pollution, and for understanding chemical transformation of reactive odd nitrogen and its impact on the budget of tropospheric ozone (O₃). In summer 2006, continuous measurements of PAN were made using an automatic GC–ECD analyzer with an on-line calibrator at a suburban site of Lanzhou (LZ) and a remote site of Mt. Waliguan (WLG) in western China, with concurrent measurements of O₃, total reactive nitrogen (NO_y) and carbon monoxide (CO). At LZ, several photochemical episodes were observed during the study, and the average mixing ratio of PAN (plus or minus standard deviation) was 0.76 (±0.89) ppbv with the maximum value of 9.13 ppbv, compared to an average value of 0.44 (±0.16) ppbv at remote WLG. The PAN mixing ratios in LZ exhibited strong diurnal variations with a maximum at noon, while enhanced concentrations of PAN were observed in the evening and a minimum in the afternoon at WLG. The daily O₃ and PAN concentration maxima showed a strong correlation (r² = 0.91) in LZ, with a regression slope (PAN/O₃) of 0.091 ppbv ppbv^?1. At WLG, six well-identified pollution plumes (lasting 2–8 h) were observed with elevated concentrations of PAN (and other trace gases), and analysis of backward particle release simulation shows that the high-PAN events at WLG were mostly associated with the transport of air masses that had passed over LZ.     

Measurement of gas-phase total peroxides at the summit of Mount Tai in China

Measurement of ambient gas-phase total peroxides was performed at the summit of Mount Tai (Mt. Tai, 1534 m above sea level) in central-eastern China during March 22–April 24 and June 16–July 20, 2007. The hourly averaged concentration of peroxides was 0.17 ppbv (± 0.16 ppbv, maximum: 1.28 ppbv) and 0.55 ppbv (± 0.67 ppbv, maximum: 3.55 ppbv) in the spring and summer campaigns, respectively. The average concentration of peroxides at Mt. Tai, which is in a heavily polluted region, was much lower than hydrogen peroxide measurements made at some rural mountain sites, suggesting that significant removal processes took place in this region. An examination of diurnal variation and a correlation analysis suggest that these removal processes could include chemical suppression of peroxide production due to the scavenging of peroxy and hydroxy radicals by high NO_x, wet removal by clouds/fogs rich in dissolved sulfur dioxide which reacts quickly with peroxides, and photolysis. These sinks competed with photochemical sources of peroxides, resulting in different mean concentrations and diurnal pattern of peroxides in the spring and summer. A principal component analysis was conducted to quantify the major processes that influenced the variation of peroxide concentrations. This analysis shows that in the spring photochemical production was an important source of peroxides, and the major sink was scavenging during upslope transport of polluted and humid air from the lower part of the planetary boundary layer (PBL) and wet removal by synoptic scale clouds. During the summer, highly polluted PBL air (with high NO_x) was often associated with very low peroxides due to the chemical suppression of HO₂ by high NO_x and wet-removal by clouds/fogs in this sulfur-rich atmosphere, especially during the daytime. Higher concentrations of peroxides, which often appeared at mid-nighttime, were mainly associated with subsidence of air masses containing relatively lower concentrations of NO_y.     

Determination of estrogenic compounds in wastewater using liquid chromatography-tandem mass spectrometry with electrospray and atmospheric pressure photoionization following desalting extraction

Two complementary LC-MS ionization methods, electrospray (ESI) and atmospheric pressure photoionization (APPI), have been optimized to determine three natural estrogenic compounds (estrone, 17beta-estradiol and estriol) and two synthetic estrogenic compounds (17alpha-ethynylestradiol and diethylstilbestrol) in the influent and effluent of wastewater treatment plants (WWTPs). The wastewater samples were first subjected to solid-phase extraction coupled with desalting extraction to remove matrix interference. The analytes were then detected using liquid chromatography-tandem mass spectrometry (LC-MS-MS) with ESI and dopant-assisted (DA) APPI to evaluate the ion suppression effect and to complement the detection and quantification of estrogenic compounds in complex wastewater samples. The average ion suppression factors for the extracts of the WWTP influent analyzed using ESI and APPI were 52+/-5% and 27+/-7%, respectively. The sensitivity and ionization efficiency of the LC-ESI-MS-MS system decreased dramatically when a complex matrix was present in the WWTP influent sample. Estrogenic compounds could be detected in the WWTP influent and effluent samples at concentrations below the parts-per-billion level. The lower detection limits obtained when using ESI and the higher matrix tolerance of the APPI method allowed the complete quantification of estrogenic compounds in very complex samples in a complementary manner.     

NaCl和KCl对厌氧污泥抑制的动力学研究

在厌氧颗粒污泥和厌氧絮状污泥系统中,进行盐质量浓度(NaCl或KCl质量浓度,下同)对厌氧污泥抑制动力学的研究,得到不同拟合的COD降解动力学方程及参数.实验结果表明:当盐质量浓度为10～30 g/L时,KCl对厌氧污泥的COD比降解速率的抑制程度大于NaCl;当盐质量浓度由0 g/L增至10 g/L时,半速率常数逐渐增加;当盐质量浓度由10 g/L增至30 g/L时,半速率常数逐渐减小;在厌氧污泥系统中,NaCl抑制作用下的盐抑制常数高于KCl,且颗粒污泥的盐抑制常数高于絮状污泥.     

Numerical simulations of heat and moisture transport in thermal protective clothing under flash fire conditions.

A numerical model of heat and moisture transport in thermal protective clothing during exposure to a flash fire was introduced. The model was developed with the assumption that textiles are treated as porous media. The numerical model predictions were compared with experimental data from different fabric systems and configurations. Additionally, with the introduction of a skin model, the parameters that affect the performance of thermal protective clothing were investigated.     

Sustainable construction--the role of environmental assessment tools

Construction has been accused of causing environmental problems ranging from excessive consumption of global resources both in terms of construction and building operation to the pollution of the surrounding environment, and research on green building design and using building materials to minimise environmental impact is already underway. However, relying on the design of a project to achieve the goal of sustainable development, or to minimise impacts through appropriate management on site, is not sufficient to handle the current problem. The aim for sustainability assessment goes even further than at the design stage of a project to consider its importance at an early stage, before any detailed design or even before a commitment is made to go ahead with a development. However, little or no concern has been given to the importance of selecting more environmentally friendly designs during the project appraisal stage; the stage when environmental matters are best incorporated. The main objectives of this paper are to examine the development, role and limitations of current environmental building assessment methods in ascertaining building sustainability used in different countries which leads to discuss the concept of developing a. sustainability model for project appraisal based on a multi-dimensional approach, that will allow alternatives to be ranked is discussed in detail in the paper.     

泡沫分离法处理含Cr~(6+)废水

采用间歇式泡沫分离法处理含Cr~(6+)废水,考察了各因素对Cr~(6+)去除效果的影响。通过正交实验分析确定的废水处理最佳工艺条件:废水pH 4.00,气体流量0.90 L/min,阳离子表面活性剂加入量300 mg/L。进水Cr~(6+)质量浓度为10 mg/L时,间歇运行的Cr~(6+)去除率为97.80%,连续运行的Cr~(6+)去除率为95.89%,出水均可达标排放。动力学实验结果表明,泡沫分离法去除Cr~(6+)的过程符合一级动力学的特征。对泡沫分离柱放大后的废水连续流实验分析结果表明,泡沫分离Cr~(6+)的效果比较稳定,但分离设备对废水处理效果有一定的影响。