Caste-fate determination primarily occurs after adult emergence in a primitively eusocial paper wasp: significance of the photoperiod during the adult stage

Independent-founding paper wasps constitute a major group of primitively eusocial insects, and when caste-fate determination occurs in temperate species of these wasps, particularly regarding whether it occurs before or after emergence, remains unclear. No critical morphological differences occur between potential queens of the next generation (often called gynes) and workers in primitively eusocial insects. The gynes of temperate species are characterized by diapausing, and the nutrients available during the larval stage have often been believed to determine caste fate. Short days usually induce diapause in temperate nonsocial insects, although few investigations of the effects of day length on caste-fate determination in paper wasps have been conducted. By exposing individuals to different combinations of short and long days during the immature and adult stages, we show for the first time that short days during the adult stage (but not during the immature stage) facilitated caste-fate determination toward gynes in a paper wasp. Moreover, the decision to diapause partly depended on changes in the photoperiod during the pupal and adult stages. The size of the adult also affected caste-fate determination, with diapause more likely to occur in large adults, but this size effect did not occur when individuals were exposed to many short days during the pupal stage. In addition, all adults except for a small proportion of smaller individuals prepared for diapause under short days. These findings suggest that the photoperiod is a higher priority cue than adult size.     

Development of a novel hybrid microwave-heater reactor for paper-based waste treatment

It is necessary to develop a medical waste management system featuring nonburning treatment and safety functions for small medical institutions. In this article, the development of a waste management system without oxygen injection was achieved by means of hybrid heating using microwave energy and an electric heater. The shape of the microwave reactor was a rectangular parallelepiped with a volume of about 0.1 m³. In the experimental setup, microwave energy (2.45 GHz, about 800 W) was injected from the top of the reactor, while the heater (about 1 kW) was located at the bottom. Heat insulators were set into all the walls of the reactor. The gases generated in the system were vented through water and activated carbon. Five paper-based diapers with absorbed water were used as the waste sample. For the evaluation of performance, the reduction rate was defined as the ratio (in percent) of the weight before and after treatment. The reduction rate as a function of treatment time and the effect of the position of the waste in the reactor on the reduction rate and the uniformity of treatment were examined for about 3 kg of waste. It was found that the reduction rate reached as low as 4.2% at 3 h and then 3% after 8 h. The treated profile strongly depended on the position of the waste in the reactor. In particular, it was clarified that a metal cylindrical enclosure and a needle electrode played an important role in attaining uniform treatment of the waste.     

Onset of symbiosis and distribution patterns of symbiotic dinoflagellates in the larvae of scleractinian corals

The establishment of symbiosis in early developmental stages is important for reef-building corals because of the need for photosynthetically derived nutrition. Corals spawn eggs and sperm, or brood planula larvae and shed them into the water. Some coral eggs or planulae directly inherit symbiotic dinoflagellates (Symbiodinium spp.) from their parents, while others acquire them at each generation. In most species examined to date, the larvae without dinoflagellates (aposymbiotic larvae) can acquire symbionts during the larval stage, but little is known regarding the timing and detailed process of the onset of symbiosis. We examined larval uptake of symbiotic dinoflagellates in nine species of scleractinian corals, the onset of symbiosis through the early larval stages, and the distribution pattern of symbionts within the larval host, while living and with histology, of two acroporid corals under laboratory conditions. The larvae acquired symbiotic dinoflagellates during the planktonic phase in all corals examined which included Acropora digitifera, A. florida, A. intermedia, A. tenuis, Isopora palifera, Favia pallida, F. lizardensis, Pseudosiderastrea tayamai, and Ctenactis echinata. The larvae of A. digitifera and A. tenuis first acquired symbionts 6 and 5 days after fertilization, respectively. In A. digitifera larvae, this coincided with the formation of an oral pore and coelenteron. The number of symbiotic dinoflagellates increased over the experimental periods in both species. To test the hypothesis that nutrients promotes symbiotic uptake, the number of incorporated dinoflagellates was compared in the presence and absence of homogenized Artemia sp. A likelihood ratio test assuming a log-linear model indicated that Artemia sp. had a significantly positive effect on symbiont acquisition. These results suggest that the acquisition of symbiotic dinoflagellates during larval stages is in common with many coral species, and that the development of both a mouth and coelenteron play important roles in symbiont acquisition.     

Improvement of permeability of waste sludge by mixing with slag or construction and demolition waste

To determine the allowable ratio of waste sludge required to ensure an aerobic zone in the landfill, we investigated sludge permeability, which involved mixing sludge, the major landfill waste in Japan, at different mixing ratios with other wastes (slag and construction and demolition waste (C&D)). We measured parameters of sample permeability and analyzed parameters that exert a large influence on oxygen penetration depth with a simulation model accounting for both diffusion and convection driven by temperature gradients. We also determined the critical volumetric contents in which gas and/or water permeability change significantly when sludge is mixed with sand or gravel. From the results of the simulations, gas permeability of the layer, the difference between inside and outside temperatures and the oxygen consumption rate exert a large influence on the resulting oxygen penetration depth. The allowable ratio of sludge required to ensure an aerobic zone in the landfill was determined by considering the balance of the above three parameters. By keeping volumetric sludge content to below 25%, air convection and oxygen penetration depth of several meters were achieved in the modeling.     

Effect of polyethylene addition to coal on hydrogasification enhancement

Hydrogasification of a coal/polyethylene mixture was carried out using a low concentration of polyethylene in the samples with the aim of industrial application. Coal/polyethylene mixtures in the ratio of 90:10 and 75:25 were used in this study. A hydrogasification experiment was conducted using a unique batch reactor at 1073 K under a 7.1 MPa hydrogen atmosphere. The reaction time varied from 1 to 80 s. The results revealed a methane yield from the mixtures that was noticeably greater than the values calculated from experimental results obtained from coal and polyethylene respectively, assuming no mutual influences. A significant synergistic effect was observed even when the polyethylene content was as low as 10 %. It is suggested that there might be an advantage in hydrogasification processes if waste plastics are mixed with coal, such content being practically assumed.     

A Microcomputer-based Forecasting Model: Potential Applications for Emergency Response Plans and Air Quality Studies

Most atmospheric transport and diffusion models within emergency response systems have very limited physics and are forced to rely on the assumption that wind and turbulence conditions at the time of the release will be representative over the period for which dispersion must be predicted. For releases where the principal concern is about the first few kilometers of travel, such an assumption is appropriate. However, for large accidental releases during stable conditions, the plume may travel for several hours before it is diluted to safe levels and the assumption of persistence may be inappropriate, particularly for transport in complex terrain. Under these circumstances, a model that can forecast changes in wind and turbulence conditions is required. We have installed such a model on microcomputers and tested it in complex terrain near Salt Lake City. One-hour tracer releases produced surface concentrations that remain high for much longer times than that expected based on one hour’ travel time with the mean wind at the source height. Furthermore, relatively large concentrations were found at distances of over 40 km from the source. The model was generally able to reproduce the principal features described by the measurements, although some effects of subgrid scale terrain were missed.     

Effects of introducing energy recovery processes to the municipal solid waste management system in Ulaanbaatar,Mongolia

Currently, most developing countries have not set up municipal solid waste management systems with a view of recovering energy from waste or reducing greenhouse gas emissions. In this article, we have studied the possible effects of introducing three energy recovery processes either as a single or combination approach, refuse derived fuel production,incineration and waste power generation, and methane gas recovery from landfill and power generation in Ulaanbaatar, Mongolia, as a case study. We concluded that incineration process is the most suitable as first introduction of energy recovery. To operate it efficiently,3Rs strategies need to be promoted. And then, RDF production which is made of waste papers and plastics in high level of sorting may be considered as the second step of energy recovery.However, safety control and marketability of RDF will be required at that moment.     

Effects of introducing energy recovery processes to the municipal solid waste management system in Ulaanbaatar,Mongolia

Currently, most developing countries have not set up municipal solid waste management systems with a view of recovering energy from waste or reducing greenhouse gas emissions. In this article, we have studied the possible effects of introducing three energy recovery processes either as a single or combination approach, refuse derived fuel production, incineration and waste power generation, and methane gas recovery from landfill and power generation in Ulaanbaatar, Mongolia, as a case study. We concluded that incineration process is the most suitable as first introduction of energy recovery. To operate it efficiently, 3Rs strategies need to be promoted. And then, RDF production which is made of waste papers and plastics in high level of sorting may be considered as the second step of energy recovery. However, safety control and marketability of RDF will be required at that moment.     

Phosphate removal and recovery with a synthetic hydrotalcite as an adsorbent

Phosphate removal is important to control eutrophication and an ion exchange process is one of several treatment processes for this purpose. Hydrotalcite compounds (HTALs) are useful as adsorbents for phosphate removal because of their ion exchange properties. In this study, the adsorption properties of a granular synthetic HTAL for phosphate and the method of regeneration of the granular HTAL were examined. The adsorption isotherm of the granular HTAL was approximated by a modified Langmuir type, and the maximum adsorption capacity was 47.3 mg P g(-1), which corresponded to the content of HTAL in the granular one. Phosphate adsorbed on the HTAL was effectively desorbed with alkaline NaCl solutions and the HTAL was regenerated with 25 w/v% MgCl(2) solution. The regenerated HTAL could be reused repeatedly for the phosphate removal. Phosphate in the exhausted desorption solution was recovered as a precipitate of calcium phosphate by addition of CaCl(2), and the residual exhausted desorption solution could be also reused after supplying NaOH. The results suggest the possibility of an effective system for phosphate removal and recovery, which includes the following processes: adsorption, desorption, recovery of phosphate, and regeneration of the HTAL and the desorption solution.     

The extremely high 137Cs inventory in the Sulu Sea: a possible mechanism

Large-volume seawater samples were collected in the Sulu and South China Seas and their (137)Cs activities were determined by gamma-ray spectrometry using a low background type high-purity Ge detector. Vertical distributions of (137)Cs activity showed an exponential decrease in the South China Sea, whereas a subsurface maximum at 200m depth and monotonic decrease below 300m were observed in the Sulu Sea. A significant difference in intermediate water (137)Cs activities in the 500-2000m depth was observed between the Sulu and South China Seas, i.e., the (137)Cs activities in the Sulu Sea were remarkably higher than those in the South China Sea. The difference in the (137)Cs inventory below 500m was approximately 1200Bqm(-2) between the Sulu and South China Seas. The (137)Cs total inventory of 3200Bqm(-2) in the Sulu Sea was 5.7 times higher than that expected from global fallout. A possible mechanism controlling this extremely high (137)Cs total inventory may be inflows of the (137)Cs rich water masses through the Luzon Strait, lateral transport across the Mindoro Strait into the Sulu Sea, and then subduction into the deep layer in the basin.