Isomer-specific analysis of chlorinated biphenyls,naphthalenes and dibenzofurans in Delor: polychlorinated biphenyl preparations from the former Czechoslovakia

Technical polychlorinated byphenyl (PCB) preparations--Delors 103, 104, 105, and 106--produced in the former Czechoslovakia were analyzed for their chlorobiphenyl (CB), chloronaphthalene (PCN) and chlorinated dibenzofuran (PCDF) composition and content using high resolution gas chromatography-mass spectrometry techniques. The congener patterns of Delors 103, 104, 105, and 106 resembled Aroclors 1242, 1248, 1254, and 1260. Delors contained PCNs and PCDFs, as impurities, at microgram per gram concentrations. Concentrations of PCNs and PCDFs in Delors were greater than those found in the corresponding Aroclors. The potential for the emissions of PCNs and PCDFs from Delor was estimated to be 3680 and 860 kg, respectively. Non- and mono-ortho PCBs were the major contributors to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) equivalents in Delor mixtures.     

Monitoring of polychlorinated biphenyls in Belgian human adipose tissue samples

Polychlorinated biphenyls (PCBs) were monitored in Belgian human adipose tissue samples from deceased individuals (n=100). Their mean age was 52, ranging from 2 to 91 years. There were 57 men and 43 women. Other known variables were date of autopsy and place of residence. No information about diet or occupation was available. The seven marker congeners PCB 28, 52, 101, 118, 138, 153 and 180 were analysed in the samples with a GC-MS/MS method validated according to Commission Decision 2002/657/EC. Extracted fat was cleaned-up over a glass column filled with n-hexane, acid silica, deactivated alumina and anhydrous sodium sulfate. The whole procedure was subjected to a rigorous quality control programme with retention times, ion chromatograms and intensity ratios of the monitored product ions as identification criteria. The total PCB concentration ranged between 10 and 1640 ng g-1 fat, with a mean value of 658 ng g-1 fat. In the age groups of 0-9 (n=1), 10-19 (n=4), 20-29 (n=11), 30-39 (n=13), 40-49 (n=15), 50-59 (n=14), 60-69 (n=14), 70-79 (n=20), 80-89 (n=6) and 90-99 (n=2), the mean total PCB concentrations were 10, 134, 253, 445, 557, 687, 807, 962, 959, and 1191 ng g-1 fat, respectively. So, there was an increase of PCB body burden with age. For the male subjects (n=57; mean age of 53) the mean total PCB concentration was 633 ng g-1 fat. For the female subjects (n=43; mean age of 52) it was 690 ng g-1 fat. There was no significant sex-related difference in the concentrations of marker PCBs.     

The evaluation of electrical energy per order (E(Eo)) for photooxidative decolorization of four textile dye solutions by the kinetic model

Photooxidative decolorization of four textile dyestuffs, C.I. Acid Orange 7 (AO7), C.I. Acid Orange 8 (AO8), C.I. Acid Orange 52 (AO52) and C.I. Acid Blue 74 (AB74), by UV/H2O2 was investigated in a laboratory scale photoreactor equipped with a 15 W low pressure mercury vapour lamp. The decolorization of the dyes was found to follow pseudo-first-order kinetics, and hence the figure-of-merit electrical energy per order (E(Eo)) is appropriate for estimating the electrical energy efficiency. The E(Eo) values were found to depend on the concentration of H2O2, concentration and basic structure of the dye. This study shows that these textile dyes can be treated easily and effectively with the UV/H2O2 process with E(Eo) values between 0.4 and 5 kW h m-3 order-1, depending on the initial concentrations of dyes and H2O2. The kinetic model, based on the initial rates of degradation, provided good prediction of the E(Eo) values for a variety of conditions.     

Bioavailability of contaminants estimated from uptake rates into soil invertebrates

It is often argued that the concentration of a pollutant inside an organism is a good indicator of its bioavailability, however, we show that the rate of uptake, not the concentration itself, is the superior predictor. In a study on zinc accumulation and toxicity to isopods (Porcellio scaber) the dietary EC(50) for the effect on body growth was rather constant and reproducible, while the internal EC(50) varied depending on the accumulation history of the animals. From the data a critical value for zinc accumulation in P. scaber was estimated as 53 microg/g/wk. We review toxicokinetic models applicable to time-series measurements of concentrations in invertebrates. The initial slope of the uptake curve is proposed as an indicator of bioavailability. To apply the dynamic concept of bioavailability in risk assessment, a set of representative organisms should be chosen and standardized protocols developed for exposure assays by which suspect soils can be evaluated.     

Temporal trends in spheroidal carbonaceous particle deposition derived from annual sediment traps and lake sediment cores and their relationship with non-marine sulphate

Spheroidal carbonaceous particles (SCPs) provide an unambiguous indication of atmospherically deposited contamination from industrial sources. SCP data from a 12 year annual sediment trapping and coring programme at 14 lakes based on the UK Acid Waters Monitoring Network, were used to consider temporal trends in deposition and to compare these with measured non-marine sulphate fluxes. Results show good temporal coherence across a broad area of northern UK and that SCP deposition levels and are now at their lowest since the 1940s, in agreement with modelled sulphate data. SCP fluxes show reasonable linearity with measured non-marine sulphate depositional fluxes from the nearest UK Acid Deposition Monitoring Network sites, especially over the post-flue-gas desulphurisation period, but comparisons prior to 1972 are not possible due to lack of data. We speculate on whether palaeolimnological SCP data might be used to reconstruct the history of non-marine sulphate fluxes from industrial sources.     

Availability of heavy metals for uptake by Salix viminalis on a moderately contaminated dredged sediment disposal site

Extractability of Cd, Cr, Cu, Ni, Pb, and Zn in a dredged sediment disposal site was assessed using single extraction procedures (H2O; 0.01 M CaCl2; 1 M NH4OAc; NH4OAc-EDTA; CaCl2-TEA-DTPA). Only Cd and Zn were found to exceed statutory threshold values for total content. The field was planted with Salix viminalis "Orm" and accumulation of heavy metals in bark, leaves, roots, and wood was evaluated at seven sampling locations along an observed gradient in texture and pollution. Biomass production was high, ranging from 13.2 to 17.8 t ha(-1) y(-1) dry weight. Metal accumulation in aboveground plant parts was low, amounting to the following annually extracted mass of metals per ha: 5034 g Zn, 83 g Cd, 145 g Cu, 83 g Pb, 12 g Ni and 6 g Cr. The use of accumulating clones and the use of soil amendments might enhance extraction efficiency in future research.     

The degradation of endocrine disruptor di-n-butyl phthalate by UV irradiation: a photolysis and product study

The direct photolysis of an important endocrine disruptor compound, di-n-butyl phthalate (DBP), has been investigated under monochromatic UV irradiation at 254 nm over a wide pH range (3-11). The investigation was carried out under idealized conditions and has considered both reaction kinetics and the degradation mechanism. It was found that more than 90% of DBP can be degraded within an hour of irradiation in water. A simple model has been developed and used to predict the initial DBP photolysis rate constant at different pH values and initial DBP concentrations. The major decomposition mechanism of DBP is believed to involve the hydrolytic photolysis of the carbon in the alpha and/or beta-position of the ester chain with the production of aromatic carboxylic derivatives. Additionally, multi-degradation pathways are proposed for acid-catalyzed hydrolytic photolysis (pH 3-5), which was found to be useful in explaining the photo-degradation of DBP under acidic conditions. The use of 254 nm UV to photo-degrade DBP was found to be a relatively fast and clean process, especially in neutral to basic conditions.     

Generation pattern of sulfur containing gases from anaerobically digested sludge cakes.

Eleven dewatered sludge cakes collected from anaerobic digesters at different treatment plants were evaluated for the amount, type, and pattern of odorous gas production. All but one of the sludge cakes were from mesophilic anaerobic digesters. One was from a thermophilic digester. The pattern and quantities of sulfur gases were found to be unique for each of the samples with regard to the products produced, magnitude, and subsequent decline. The main odor-causing chemicals were volatile sulfur compounds, which included hydrogen sulfide, methanethiol, and dimethyl sulfide. Volatile sulfur compound production peaked in 3 to 8 days and then declined. The decline was a result of conversion of organic sulfur compounds to sulfide. In one side-by-side test, a high-solids centrifuge cake generated more odorous compounds than the low-solids centrifuge cake. The data show that anaerobic digestion does not eliminate the odor potential of anaerobically digested dewatered cakes.     

Biosolids-amended soils: Part I. Effect of biosolids application on soil quality and ecotoxicity.

Investigations of potential risk from biosolids generally indicate that land application does not threaten human or ecosystem health, but questions continue to arise concerning the environmental effects of this practice. This research project was initiated to evaluate ecotoxicity resulting from the amendment of soils with biosolids from municipal wastewater treatment plants. Toxicity was evaluated using standard tests, including earthworm mortality, growth, and reproduction; seedling germination and root elongation; microbial respiration; and nematode mortality and reproduction. Nineteen municipal wastewater treatment plants were identified to participate in an initial screening of toxicity, and five were chosen for a more detailed evaluation. In addition, two soils with historically high applications of high-metal biosolids were evaluated. Contaminants examined were zinc, copper, nickel, chromium, arsenic, cadmium, lead, and coplanar polychlorinated biphenyls (PCBs). Single applications had no effect on soil metal concentrations. Coplanar PCBs were not detectable in any of the soils or biosolids. All target organisms were sensitive to reference toxicants. Limited toxicity was observed in a small number of the amended soils, but no patterns emerged. Approximately one-half of the negative effects of biosolids on bioindicators could be attributed to routine properties, such as slight depression of pH and/or elevated salinity. None of the accumulated metal concentrations were excessive, and most would not be considered elevated. These observations suggest that current regulations for application of biosolids to soils are providing adequate ecosystem protection.     

Effect of sequencing batch reactor operation on presence and concentration of tetracycline-resistant organisms.

The effect of sequencing batch reactor operation on presence and concentration of tetracycline-resistant organisms was studied as a function of organic loading rate (OLR) and solids retention time (SRT), with and without supplemented influent tetracycline. These effects were evaluated using bacterial counts, bacterial production, system growth rate, and percent resistance. These evaluation parameters were applied to both intermediate resistant and resistant heterotrophs, enterics, and lactose fermenters. Tetracycline intermediate resistant and resistant bacteria are defined as the survival of colonies on agar with 5 and 20 mg/L tetracycline, respectively. Based on these studies, increases in influent tetracycline concentration and OLR resulted in amplification of tetracycline resistance. Decreases in SRT also resulted in amplification of tetracycline resistance.