Occurrence,sources, and ecological risks of PBDEs,PCBs, OCPs,and PAHs in surface sediments of the Yangtze River Delta city cluster,China

Polybrominated diphenyl ethers (PBDEs), organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs) in 25 surface sediments in three cities (Nantong, Wuxi, and Suzhou) in the Yangtze River Delta, eastern China were measured. The mean concentrations were 378, 45.8, 1.98, 4,002 ng/g for PBDEs, OCPs, PCBs, and PAHs, respectively. Their levels in the sediments in the three cities were generally consistent with the city industrialization. PBDEs and OCPs were markedly dominated by deca-BDE (>90 %) and DDTs (>70 %). A principle component analysis of the analytes identified three major factors suggesting different sources of the contaminants in the sediments. PBDEs and the organic carbon in the sediments have common sources from industrial activities; whereas OCPs and PCBs, correlated with the second factor, were mainly from historical sources. The third factor with loadings of PAHs is indicative of various combustion sources. Ecological risk assessment indicated that the potential highest risk is from DDTs, for which 22 sites exceed the effects range low (ERL) values and three sites exceed the effects range median (ERM) value.     

Assessment of trace element contamination in sediment cores from the Pearl River and estuary,South China: geochemical and multivariate analysis approaches

Twenty-four major and trace elements and the mineralogical composition of four sediment cores along the Pearl River and estuary were analyzed using ICP-AES, ICP-MS, and X-ray diffraction (XRD) to evaluate contamination levels. The dominant minerals were quartz, kaolinite, and illite, followed by montmorillonite and feldspars, while small amounts of halite and calcite were also observed in a few samples. Cluster analysis (CA) and principal component analysis (PCA) were performed to identify the element sources. The highest metal concentrations were found at Huangpu, primarily due to wastewater treatment plant discharge and/or the surreptitious dumping of sludge, and these data differed from those of other sources. Excluding the data from Huangpu, the PCA showed that most elements could be considered as lithogenic; few elements are the combination of lithogenic and anthropogenic sources. An antagonistic relationship between the anthropogenic source metals (K, Ba, Zn, Pb, Cd, Ag, Tl, and U) and marine source metals (Na, Mg, Ti, V, and Ca) was observed. The resulting normalized Al enrichment factor (EF) indicated very high or significant pollution of Cd, Ag, Cu, Zn, Mo, and Pb at Huangpu, which may cause serious environmental effects. Conflicting results between the PCA and EF can be attributed to the background values used, indicating that background values must be selected carefully.     

兰州地区大气污染的化学组成及来源解析

为探究大气污染的特征,于2020年5月—2021年4月在中国西北部的兰州市区采集了总悬浮颗粒物样品227个,利用离子色谱仪、热/光碳分析仪对主要水溶性离子、元素碳(EC)和有机碳(OC)的质量浓度进行了测定.结果显示,兰州地区大气总悬浮颗粒物质量浓度均值为(376.7±974.8)μg·m^-3,高于国家环境空气质量二级标准(NAAQS),呈昼低夜高的变化特征主要是由于兰州地区夜间大气多处于静稳状态导致的污染物累积效应.水溶性阴、阳离子按质量浓度排序为NO₃^->SO₄^2->Cl^-、Ca²⁺>NH₄⁺>Na⁺>K⁺>Mg²⁺,其中二次离子(NO₃^-、SO₄^2-、NH₄⁺     

山水林田湖草生命共同体的科学认知、路径及制度体系保障

山水林田湖草生命共同体是对人与自然和谐统一关系的新认知,是生态文明理论的重要组成部分。以建立一个山水林田湖草生命共同体的研究范式为目的,系统剖析了山水林田湖草生命共同体理论与应用在基础探索、快速发展和多元繁荣三个阶段的研究重点与特征;再次审视了山水林田湖草生命共同体的内涵、阐明了概念新认知、基本特征、人与生命共同体关系;最后提出面向山水林田湖草生命共同体的“问题—目标—时空策略—目的”的实施路径,及构建以自然资源监测监管体系、自然资源资产产权体系、国土空间规划体系、国土空间用途管制体系、国土空间生态修复体系、法律法规体系等为主的制度体系,进而提升其科学性和实用性,为构建国土空间治理体系及治理能力现代化提供决策支撑。     

天津市中心城区集中供应管网末梢水的抗生素耐药基因污染特征研究

为了研究天津市中心城区集中供应管网末梢水的抗生素耐药基因(antibiotic resistance genes,ARGs)污染特征,采集了天津市中心城区6个采样点的管网末梢水样,分别采用微孔滤膜正压过滤法及核酸吸附-洗脱法富集水中细菌和胞外核酸后,利用实时定量PCR技术对15种胞内ARGs和胞外ARGs进行定量检测....     

Shaping effects of rice,wheat, maize,and soybean seedlings on their rhizosphere microbial community

The rhizosphere microbiome plays critical roles in plant growth and is an important interface for resource exchange between plants and the soil environment. Crops at various growing stages, especially the seedling stage, have strong shaping effects on the rhizosphere microbial community, and such community reconstruction will positively feed back to the plant growth. In the present study, we analyzed the variations of bacterial and fungal communities in the rhizosphere of four crop species: rice, soybean, maize, and wheat during successive cultivations (three repeats for the seedling stages) using 16S rRNA gene and internal transcribed spacer (ITS) high-throughput sequencing. We found that the relative abundances of specific microorganisms decreased after different cultivation times, e.g., Sphingomonas, Pseudomonas, Rhodanobacter, and Caulobacter, which have been reported as plant-growth beneficial bacteria. The relative abundances of potential plant pathogenic fungi Myrothecium and Ascochyta increased with the successive cultivation times. The co-occurrence network analysis showed that the bacterial and fungal communities under maize were much more stable than those under rice, soybean, and wheat. The present study explored the characteristics of bacteria and fungi in crop seedling rhizosphere and indicated that the characteristics of indigenous soil flora might determine the plant growth status. Further study will focus on the use of the critical microorganisms to control the growth and yield of specific crops.

     

Stabilization of heavy metals in MSWI fly ash using silica fume

The objective of this work was to investigate the feasibility and effectiveness of silica fume on stabilizing heavy metals in municipal solid waste incineration (MSWI) fly ash. In addition to compressive strength measurements, hydrated pastes were characterized by X-ray diffraction (XRD), thermal-analyses (DTA/TG), and MAS NMR (²⁷Al and ²⁹Si) techniques. It was found that silica fume additions could effectively reduce the leaching of toxic heavy metals. At the addition of 20% silica fume, leaching concentrations for Cu, Pb and Zn of the hydrated paste cured for 7 days decreased from 0.32 mg/L to 0.05 mg/L, 40.99 mg/L to 4.40 mg/L, and 6.96 mg/L to 0.21 mg/L compared with the MSWI fly ash. After curing for 135 days, Cd and Pb in the leachates were not detected, while Cu and Zn concentrations decreased to 0.02 mg/L and 0.03 mg/L. The speciation of Pb and Cd by the modified version of the European Community Bureau of Reference (BCR) extractions showed that these metals converted into more stable state in hydrated pastes of MSWI fly ash in the presence of silica fume. Although exchangeable and weak-acid soluble fractions of Cu and Zn increased with hydration time, silica fume addition of 10% can satisfy the requirement of detoxification for heavy metals investigated in terms of the identification standard of hazardous waste of China.     

Cadmium accumulation characteristics of floricultural plant Cosmos bipinnata*

The artificially high soil cadmium (Cd) concentration screening method was used to screen Cd-hyperaccumulators from floricultural plants. Among the five species of floricultural plants screened, Cosmos bipinnata showed the characteristics of Cd-accumulators. A pot experiment was conducted to further study Cd accumulation characteristics of C. bipinnata. The results showed that the biomass, chlorophyll content, superoxide dismutase activity, peroxidase activity and soluble protein content of C. bipinnata first increased and later decreased with the increase in soil Cd concentration, but the carotenoid content and catalase activity of C. bipinnata reduced. Cd contents in roots, stems, leaves and shoots of C. bipinnata increased with increasing soil Cd concentration. When the soil Cd concentration was 50?mg?kg^?1, the Cd content in shoots was up to 112.62?mg?kg^?1, which was higher than the Cd-hyperaccumulator critical value. The root and shoot bioconcentration factors exceeded 1 in various Cd treatments, but the translocation factors were less than 1. When the soil Cd concentration was 50?mg?kg^?1, the Cd accumulation in shoots achieved the maximum of 224.30?μg plant^?1. Therefore, considering the tolerance and accumulation of Cd, C. bipinnata is a Cd-accumulator that could be used to remediate Cd-contaminated urban soil.     

Accelerating preliminary eco-innovation design for products that integrates case-based reasoning and TRIZ method

While the innovativeness and market potential of a new product is normally emphasized, its environmental impact is often neglected. Despite their ability to help designers reduce the environmental impact of products throughout their life cycle, many eco-design methods focus on the redesign of existing products, necessitating a more innovative design capacity. This work describes a novel model to accelerate the preliminary eco-innovation product design by integrating the advantages of case-based reasoning and the TRIZ method. Previous cases from a database support a novel design to satisfy functional performances under the CBR framework. The innovative principles and evolution patterns of the TRIZ method can enhance the design level of new products to achieve eco-innovation. Four eco-innovation concepts for a PC mouse demonstrate the effectiveness of the proposed model.