Fate of polycyclic aromatic hydrocarbons during vitrification of incinerator ash in a coke bed furnace

Fate of polycyclic aromatic hydrocarbons (PAHs) during the vitrification of fly ash and bottom ash from the municipal waste incinerator in a coke bed furnace was investigated. In this system, both coke and lime were added to enhance the melting reaction. The major PAH sources in this system were ash and coke, which respectively contributed 97% and 3% of PAHs in the input-mass. During vitrification process, low molecular PAHs (LM-PAH, 2-3-ring), median molecular PAHs (MM-PAH, 4-ring) and high molecular PAHs (HM-PAH, 5-7-ring) mass respectively accounted for >99%, >99% and 84% of the output-mass emitted as the stack flue gas; while those discharged from the slag were <1%, <1% and 16%, respectively. The O/I (output-mass/input-mass) ratio of LM-, MM- and HM-PAHs were 0.063, 0.002 and <0.001, respectively. The high distribution in flue gas and O/I ratio of LM-PAHs is reasonable since they are more easily evaporated, hence difficult to be removed by air pollution control devices. On the contrary, the HM-PAHs, having lower vapor pressure, primarily stays mainly in slag. Based on the 21 total PAH content in feeding ash and slag, the reduction efficiency of the coke bed furnace was >99.9%. To minimize the risk of secondary pollution, the efficiency of coke bed furnace should be improved to reduce the PAH emission into ambient air.     

Influences of metals on kinetics of methyl tert-butyl ether biodegradation by Ochrobactrum cytisi

The influence of zinc, manganese, and nickel on the degradation of MTBE (methyl tert-butyl ether), by an aerobic MTBE-degrading strain, Ochrobactrum cytisi, were investigated. The result showed that unlike previous findings, O. cytisi was able to degrade MTBE through direct metabolism when MTBE was present as the only carbon source. The degradation rate of MTBE was rapid, completed within 80 h. MTBE biodegradation by this strain was stimulated at low concentrations of Zn(2+) (1-5 mg l(-1)) and Mn(2+) (1-5 mg l(-1)) but inhibited at high concentrations of Zn(2+) (20 mg l(-1)) and Mn(2+) (20 mg l(-1)), and at low concentration of Ni(2+) (1-4 mg l(-1)). Kinetic parameters for MTBE degradation in the presence or absence of metals were obtained through nonlinear regression and a least-square minimization procedure. In all cases, a good agreement was achieved between kinetic simulations and experimental results.     

OPTIMUM STORAGE VOLUME OF ROOFTOP RAIN WATER HARVESTING SYSTEMS FOR DOMESTIC USE1

ABSTRACT: Major parameters and optimum storage volumes of rooftop rain water harvesting systems (RRWHSs) have not been investigated in detail in Taiwan. Accordingly, the four major parameters of RRWHSs were herein identified and elucidated using a simulation method. Because the performance of the RRWHSs is sensitive to the runoff coefficient, a field experiment was conducted to determine the runoff coefficient more precisely for various types of roofs. A simulation model including production theory was developed and employed to estimate the most cost effective combination of the roof area and the storage capacity that best supplies a specific volume of water. Consequently, the expansion path of optimum solutions for different volumetric reliability of water supply can be determined. Additionally, the method based on the marginal rate of substitution can be used for determining the rational volumetric reliability. The procedures developed herein constitute an effective tool for preliminarily estimating the most satisfactory storage capacity of any specific roof area and for determining the rational reliability of a corresponding water supply.     

Decomposition of trichloroethylene and 2,4-dichlorophenol by ozonation in several organic solvents

The effects of chemical characteristics of organic solvents on the decomposition rate constants of undissociative trichloroethylene (TCE) and dissociative 2,4-dichlorophenol (2,4-DCP) by ozonation were studied. The TCE and 2,4-DCP decomposition by ozonation in organic solvents followed to the first-order reaction kinetics with respect to TCE or 2,4-DCP concentration. The orders of the rate constants among organic solvents for undissociative TCE and dissociative 2,4-DCP were different indicating that the ozonation rates for undissociative and dissociative compounds were dependent on the chemical property of organic solvent. The decomposition of undissociative TCE by ozonation was a simple electrophilic reaction, which was dependent on acceptor number (AN) of the solvent. On the other hand, the decomposition of dissociative 2,4-DCP was dependent on by the dissociation of the compounds and would be dependent on donor number (DN) of the solvent. Finally, TCE in acetic acid was transformed to chlorinated intermediates and chloride ion and then these intermediates were continuously oxidized to chlorine gas.     

An efficient venturi scrubber system to remove submicron particles in exhaust gas

An efficient venturi scrubber system making use of heterogeneous nucleation and condensational growth of particles was designed and tested to remove fine particles from the exhaust of a local scrubber where residual SiH4 gas was abated and lots of fine SiO2 particles were generated. In front of the venturi scrubber, normal-temperature fine-water mist mixes with high-temperature exhaust gas to cool it to the saturation temperature, allowing submicron particles to grow into micron sizes. The grown particles are then scrubbed efficiently in the venturi scrubber. Test results show that the present venturi scrubber system is effective for removing submicron particles. For SiO2 particles greater than 0.1microm, the removal efficiency is greater than 80-90%, depending on particle concentration. The corresponding pressure drop is relatively low. For example, the pressure drop of the venturi scrubber is approximately 15.4 +/- 2.4 cm H2O when the liquid-to-gas ratio is 1.50 L/m3. A theoretical calculation has been conducted to simulate particle growth process and the removal efficiency of the venturi scrubber. The theoretical results agree with the experimental data reasonably well when SiO2 particle diameter is greater than 0.1 microm.     

Trends in concentration of ground-level ozone and meteorological conditions during high ozone episodes in the Kao-Ping Airshed, Taiwan

This work analyzes the variations in daily maximum 1-hr ozone (O3) concentrations and the long-term trends in annual means of hourly ambient concentrations of O3, nitrogen oxides (nitrous oxide + nitrogen dioxide), and nonmethane hydrocarbons in the three administrative regions of Kao-Ping airshed in southern Taiwan over a recent 8-yr period. The annual or monthly means of all maxima, most 95th percentiles, and some 90th percentiles of the daily maximum 1-hr O3 concentrations exceed the daily limit of 120 parts per billion by volume in all three regions, namely, Kao-hsiung City, Kso-hsiung County, and P'ing-tung County. The monthly means of daily maximum 1-hr O3 concentrations exhibit distinct seasonal variations, with a bimodal form with the maxima in autumn and late winter to the middle of spring and a minimum in summer. The long-term variations in the annual means of hourly O3 concentrations in the three regions exhibit increasing trends. These increases in O3 are associated with the decline in ambient concentrations of nitrogen oxides and nonmethane hydrocarbons. High O3 episodes occur most often in autumn and most rarely in summer. The seasonal mean mixing heights in descending order follow the order of spring, summer, autumn, and winter. Meteorological parameters in autumn and winter indicate that the ground-level O3 tends to accumulate and trigger a high O3 episode on a warm day with sufficient sunlight and low wind in a high-pressure system, consistent with the low mixing heights in these two seasons.     

Pyrolysis kinetics and residue characteristics of petrochemical industrial sludge

This study investigated the pyrolysis characteristics of sludge from wastewater treatment plants in the petrochemical industry and focused on the pyrolysis kinetics, elemental composition of residue, and volatile organic compounds (VOCs) of exhaust gas. As pyrolysis temperature increased to 773 K, the increasing rate of crude oil production tended to a stable condition. The result indicated that the optimal temperature of crude oil and water mixed production was 773 K. When pyrolysis temperature increased from 673 to 973 K, carbon, oxygen, nitrogen, and hydrogen concentrations of residue decreased and the sulfur concentration of residue increased. The concentrations of benzene, toluene,ethylbenzene, and styrene increased by the increasing pyrolysis temperature. We found that the reaction order of sludge pyrolysis was 2.5 and the activation energy of the reaction was 11.06 kJ/mol. We believe that our pyrolysis system is transitional between devolatilization and combustion.     

Effects of experimental parameters on NF(3) decomposition fraction in an oxygen-based RF plasma environment

Clean procedure is one of the major emitters of perfluorinated compounds (PFCs) in semiconductor manufacturing. Nitrogen trifluoride (NF(3)) is increasingly the process gas of choice for eliminating PFC emissions. However, its toxic to human and similar global warming potential compared to most other PFCs made NF(3) warranted much more investigation. This study demonstrated a radio-frequency plasma system for decomposing NF(3). The effects of experimental parameters: input power, O(2)/NF(3) ratio, operational pressure and NF(3) feeding concentration on NF(3) decomposition fraction (eta(NF3)) and energy efficiency E(NF3) were examined in detail. The analytical results demonstrated that the NF(3) was almost completely decomposed (>99%) at input power=30W, [NF(3)](in)=1.0% and eta(NF3) increased with input power. However, adding O(2) to the system inhibited NF(3) decomposition and decreased E(NF3). Moreover, eta(NF3) and E(NF3), decreased with gradually increasing operational pressure. Notably, increasing the NF(3) feeding concentration increased molecule density, reducing eta(NF3), but increasing E(NF3). Furthermore, the products detected in the NF(3)/O(2)/Ar plasma system were NO(2), NO, N(2)O, SiF(4), N(2) and F(2). Potential reaction pathways in the oxygen-based NF(3) plasma environment were built-up and elucidated.     

Microbial kinetic analysis of three different types of EBNR process

The disadvantages of developed biological nutrient removal (BNR) processes (additional energy for liquid circulation and addition of external carbon substrate for denitrification in anoxic zones) were improved by reconfiguring the process into (1) an anaerobic zone followed by multiple stages of aerobic-anoxic zones (TNCU3 process) or (2) anaerobic, oxic, anoxic, oxic zones in sequence (TNCU2 process). These two pilot plants were operated at a recycling sludge ratio of 0.5 without internal recycle of nitrified supernatant. The sludge retention time was maintained at 10 d. The main objective of this study is to analyze the kinetics of different microorganisms in these two processes and A2O process by using the Activated Sludge Model No. 2d. The effective removal efficiency of carbon, total phosphorus and total nitrogen at 87-98%, 92-100% and 63-80%, respectively, were achieved in the testing runs. According to model simulations, the microbial kinetics in the TNCU3 and TNCU2 processes would be affected by different operations. When the step feeding strategy was adopted, the HRT was longer due to the less influent flowrate in the front stages and the microbes would grow in quantities by about 6% in the aerobic reactors. In the followed anoxic reactors, the microbes would decrease in quantities by about 12% due to the dilution effect. The dilution effects in TNCU3 and TNCU2 processes did not take place in A2O process because the recycling mixed liquid from the aerobic reactor to the anoxic reactor still contained particulate components. The XH, XPAO, and XAUT concentrations in the effluent of the last tank were lower when the step-feeding mode was adopted. The TNCU3 and TNCU2 processes could be operated efficiently without nitrified liquid circulation and addition of external carbon substrate for denitrification.