The impact of the carbon tax policy on green building strategy

As Green Corporate Social Responsibility spreads across the globe, the construction industry is under pressure to reduce the carbon emissions across their building projects. Between maximum profit and environment management, mathematical programming can be used as a decision support tool concerning the optimal green building projects portfolio. This environment strategic decision problem is addressed in this study where an activity-based costing decision model incorporating carbon tax costs and construction resources constraints is developed from the perspectives of capacity expansion and green technology outsourcing. The results illustrate the positive contribution of the mathematical programming approach to achieve viable green building projects portfolio solutions. Sensitivity analyses are carried out to analyse the impact of carbon footprint emission variation on maximum profit, and the corresponding results are discussed.     

Photocatalytic degradation of methyl orange by a multi-layer rotating disk reactor

Introduction

Solar wastewater treatment based on photocatalytic reactions is a green process that utilizes renewable energy resources and minimizes secondary pollution. Reactor design plays an important role in promoting treatment efficiency and throughput density (based on unit volume of the reactor).

Experimental

A rotating disk reactor that significantly increases the process efficiency has been designed and evaluated for application to photocatalytic decomposition of dye pollutants in aqueous solutions. In this process, a novel multi-layer rotating disk reactor (MLRDR) was presented. Photocatalyst (TiO₂) particles are immobilized on the surfaces of disks. Within each layer of the reactor, methyl orange aqueous solution is allowed to flow from the center of the disk in a radial direction along the surface of the disk, which is rotating at high speed and is irradiated with UV lamps. The effluent is then directed to the center of another layer that lies underneath. Up to four stacked layers have been tested in this study, and the effects due to the number of the layers and volumetric flow rate on reaction conversion are investigated.

Results and discussion

The efficiency of this photocatalytic reactor exhibits complex dependence on these parameters. With selected operating conditions, conversions greater than 95% can be achieved within seconds of residence time. Design equations of the reactor have been derived based on fluid dynamics and kinetic models, and the simulation results show promising scale-up potential of the reactor.     

A pilot study for determining the optimal operation condition for simultaneously controlling the emissions of PCDD/Fs and PAHs from the iron ore sintering process

In this study, the cost-benefit analysis technique was developed and incorporated into the Taguchi experimental design to determine the optimal operation combination for the purpose of providing a technique solution for controlling both emissions of PCDD/Fs and PAHs, and increasing both the sinter productivity (SP) and sinter strength (SS) simultaneously. Four operating parameters, including the water content, suction pressure, bed height, and type of hearth layer, were selected and all experimental campaigns were conducted on a pilot-scale sinter pot to simulate various sintering operating conditions of a real-scale sinter plant. The resultant optimal combination could reduce the total carcinogenic emissions arising from both emissions of PCDD/Fs and PAHs by 49.8%, and increase the sinter benefit associated with the increase in both SP and SS by 10.1%, as in comparison with the operation condition currently used in the real plant. The ANOVA results indicate that the suction pressure was the most dominant parameter in determining the optimal operation combination. The above result was theoretically plausible since the higher suction pressure provided more oxygen contents leading to the decrease in both PCDD/F and PAH emissions. But it should be noted that the results obtained from the present study were based on pilot scale experiments, conducting confirmation tests in a real scale plant are still necessary in the future.     

Effects of emulsified asphalt on the mechanical properties of granulation of calcium fluoride sludge

Journal of Material Cycles and Waste Management - To reduce the landfill volume of waste CaF2 sludge, artificial fluorite bulk (AFB) is granulated by blending CaF2 sludge and emulsified asphalt...     

Will unit‐pricing enhance recycling?

Unit pricing is a program in solid waste management that integrates market instruments to encourage households to reduce waste generation and increase recycling. Many studies have shown that unit pricing is effective, especially when the evaluation is based on comparing outcomes before and after implementation. In this paper, we use the so-called difference-in-differences approach to evaluate unit pricing. This approach can provide a less-biased estimation, and can help to examine whether a unit pricing program generates less waste and higher recycling or results in illegal dumping in neighboring regions. Using the fee-per-bag program implemented in Taipei City, Taiwan, as a case study, we found that unit pricing does reduce the amount of garbage but its impact on recycling is not as significant as the current literature suggests. Moreover, the program causes a serious negative externality: more than 60%?of the garbage reduction in the city is due to increased dumping of waste in neighboring regions. As the impact of unit‐pricing on recycling is limited, policy-makers cannot rely solely on this program to enhance recycling in the management of municipal solid waste.     

Waste-to-energy for circular low-carbon society in Taiwan: a case study

Journal of Material Cycles and Waste Management - Taiwan is a developed nation with a high dependence (97.4%) on imported energy in 2021. Thus, the Taiwan government established the energy policy...     

Surface ozonation of polyvinyl chloride for its separation from waste plastic mixture by froth floatation

Selective surface modification of polyvinyl chloride (PVC) by ozonation was evaluated to facilitate the separation of PVC from other heavy plastics with almost the same density as PVC, especially polyethylene terephthalate (PET), by the froth flotation process. The optimum froth flotation conditions were investigated, and it was found that at 40°C, 90% of PVC and PET plastics floated. The bubble size became larger and the area covered with bubbles on the plastic surface was reduced with increasing temperature. Optimum PVC separation was achieved with the flotation solution at 40°C and mixing at 180–200 rpm, even for sheet samples 10 mm in size. Combined treatment by ozonation and froth flotation is a simple, effective, and inexpensive method for PVC separation from waste plastics.     

Relationship between air pollution and daily mortality in a subtropical city: Taipei, Taiwan

Air pollution has been associated with daily mortality in numerous studies over the past decade. However most of these studies were conducted in the United States and Europe with relatively few done in Asia. In the current study, the association between ambient air pollution and daily mortality in Taipei, Taiwan's largest city which has a subtropical climate was undertaken, for the period 1994-1998 using a case-crossover analysis. This design is an alternative to Poisson time series regression for studying the short-term adverse health effects of air pollution. The air pollutants examined included particulate matter (PM(10)), sulfur dioxide (SO(2)), ozone (O(3)), nitrogen dioxide (NO(2)), and carbon monoxide (CO). The largest observed effect, which was without statistical significance, was seen for NO(2) and CO levels on deaths due to respiratory diseases (ORs=1.013 and 1.014, respectively). The well established link between air pollution levels and daily mortality may not be as strong in cities in subtropical areas, although other factors such as differences in pollutant mix or the underlying health of the population may explain the lack of a strong association in this study. Further studies of this type in cities with varying climates and cultures are needed.     

First detection of enteric adenoviruses genotype 41 in recreation spring areas of Taiwan

Environmental Science and Pollution Research - Human adenoviruses (HAdVs) are DNA viruses found in recreational water, such as water parks and swimming pools. Human adenovirus 41 (HAdV-41) is the...