Rapid karyotyping in ectopic pregnancies

The aim of this study was to determine the feasibility of karyotyping ectopic Fallopian tube pregnancies utilizing dividing cytotrophoblast cells. Villi from 78 ectopic conceptuses were processed by the direct chromosome technique and cytogenetic diagnosis was successful in 60 cases (76-9 per cent). The amount of villi obtained, as well as villus morphology, was correlated with cytogenetic success rate. Histological examination of the Fallopian tube was also carried out. A total of 47 cases were chromosomally abnormal (78-3 per cent), which is the highest frequency of cytogenetic abnormalities reported to date.     

Implications of mangrove dynamics for private and use in bragança, north Brazil: a case study

This work analyses effects of recent variations in the tidal inundation frequency in a mangrove ecosystem in the Bragança peninsula, North Brazil, and its implications for land occupation and use. Field data, time series of remote sensing images and local legislation were analysed focusing on the potential socio-economic impact of a changing environmental setting due to a rise in relative sea level. In the investigated period (1972–1997), vegetation changes along the coastline indicate net losses of mangrove coverage. In the central part of the peninsula, a topographically higher herbaceous plain constituting part of a farm presents an active progression of mangrove forest into an area previously dominated by grasses and herbs. This area measured 8.8 km² in 1972 but was gradually reduced to 5.6 km² in 1997, while progressively replaced by a monospecific stand of the black mangrove,Avicennia germinans. A linear extrapolation indicates that the elevated plain may be completely covered by mangrove by 2035. Current Brazilian legislation prohibits the extraction of mangrove trees without an officially approved management plan. Thus, the usable area of the farm has suffered a reduction by ca. 36% over 25 yr and we predict that is could be entirely replaced by mangroves in the next 35 yr. In this case study, legislation and ecosystem characteristics are analysed and a management plan discussed which could represent income alternatives for affected resource users at the local and regional level.     

An introduction to digital methods in remote sensing of forested ecosystems: Focus on the Pacific Northwest,USA

Aerial photography has been routinely used for several decades by natural resource scientists and managers to map and monitor the condition of forested landscapes. Recently, along with the emergence of concepts in managing forests as ecosystems, has come a significant shift in emphasis from smaller to larger spatial scales and the widespread use of geographic information systems. These developments have precipitated an increasing need for vegetation information derived from other remote sensing imagery, especially digital data acquired from high-elevation aircraft and satellite platforms. This paper introduces fundamental concepts in digital remote sensing and describes numerous applications of the technology. The intent is to provide a balanced, nontechnical view, discussing the shortcomings, successes, and future potential for digital remote sensing of forested ecosystems.     

The validation of a passive sampler for indoor and outdoor concentrations of volatile organic compounds

Volatile organics compounds (VOCs) are ubiquitous in the air we breathe. The use of passive samplers to measure these concentrations can be an effective technique. When exposed for long durations, a passive sampler may be a good tool for investigating chronic exposures to chemicals in the environment. A passive sampler that was designed for occupational exposures can be used as such a tool. Laboratory validation under as many conditions as possible needs to be accomplished so as to characterize the sampler with known parameters. This paper describes the methods and results of an investigation into the validity of using a passive monitor to sample VOCs for a three-week period. Two concentration levels, two relative humidities, and five VOCs were studied. Results indicate that the samplers work best under conditions of high concentration with low relative humidity and low concentration with high relative humidity. For the passive sampler, excluding chloroform, percent deviations from the predicted values varied between -41 and +22 percent; while the values between the passive and the active samplers varied between -27 and +24 percent. Benzene, heptane, and perchloroethylene were sampled with equal precision and accuracy.     

Size distribution and sources of aerosol in Launceston, Australia, during winter 1997

As part of a pilot study into the chemical and physical properties of Australian fine particles, a suite of aerosol samples was collected at Ti Tree Bend in Launceston, Tasmania, during June and July 1997. This period represents midwinter in the Southern Hemisphere, a period when aerosol sources in Launceston are dominated by smoke from domestic wood burning. This paper describes the results from this measurement campaign, with the aim of assessing the effect of wood smoke on the chemical and physical characteristics of ambient aerosol. A micro orifice uniform deposit impactor (MOUDI) was used to measure the size distributions of the aerosol from 0.05 to 20 microns aerodynamic diameter. Continuous measurements of fine particle mass were made using a PM2.5 tapered element oscillating microbalance (TEOM) and light scattering coefficients at 530 nm were measured with nephelometers. Mass size distributions tended to be bimodal, with the diameter of the dominant mode tending to smaller sizes with increases in total mass. Non-sea salt potassium and polycyclic aromatic hydrocarbons (PAHs) were used as chemical tracers for wood smoke. Wood smoke was found to increase absolute particle mass (enough to regularly exceed air quality standards), and to concentrate mass in a single mode below 1 micron aerodynamic diameter. The acid-base equilibrium of the aerosol was altered by the wood smoke source, with free acidity hydrogen ion, non-sea salt sulfate, and ammonium concentrations being higher and the concentration of all species, including nitrate (to differing extents), focused in the fine particle size ranges. The wood smoke source also heavily influenced the aerosol scattering efficiency, adding to a strong diurnal cycle in both mass concentration and light scattering.     

From agricultural use of sewage sludge to nutrient extraction: A soil science outlook

The composition of municipal wastewater and sewage sludge reflects the use and proliferation of elements and contaminants within society. In Sweden, official statistics show that concentrations of toxic metals in municipal sewage sludge have steadily decreased, by up to 90 %, since the 1970s, due to environmental programmes and statutory limits on metals in sludge and soil. Results from long-term field experiments show that reduced metal pollution during repeated sewage sludge application has reversed negative trends in soil biology. Despite this Swedish success story, organic waste recycling from Swedish towns and cities to arable land is still limited to only about 20 % of the total amount produced. Resistance among industries and consumers to products grown on land treated with sewage sludge may not always be scientifically grounded; however, there are rational obstacles to application of sewage sludge to land based on its inherent properties rather than its content of pollutants. We argue that application of urban organic wastes to soil is an efficient form of recycling for small municipalities, but that organic waste treatment from large cities requires other solutions. The large volumes of sewage sludge collected in towns and cities are not equitably distributed back to arable land because of the following: (i) The high water and low nutrient content in sewage sludge make long-distance transportation too expensive; and (ii) the low plant availability of nutrients in sewage sludge results in small yield increases even after many years of repeated sludge addition. Therefore, nutrient extraction from urban wastes instead of direct organic waste recycling is a possible way forward. The trend for increased combustion of urban wastes will make ash a key waste type in future. Combustion not only concentrates the nutrients in the ash but also leads to metal enrichment; hence, direct application of the ash to land is most often not possible. However, inorganic fertiliser (e.g. mono-ammonium phosphate fertiliser, MAP) can be produced from metal-contaminated sewage sludge ash in a process whereby the metals are removed. We argue that the view on organic waste recycling needs to be diversified in order to improve the urban–rural nutrient cycle, since only recycling urban organic wastes directly is not a viable option to close the urban–rural nutrient cycle. Recovery and recycling of nutrients from organic wastes are a possible solution. When organic waste recycling is complemented by nutrient extraction, some nutrient loops within society can be closed, enabling more sustainable agricultural production in future.     

National-Level Wetland Policy Specificity and Goals Vary According to Political and Economic Indicators

Environmental Management - Growing recognition of the importance of wetlands to human and ecosystem well-being has led countries worldwide to implement wetland protection policies. Different...     

Size Distribution and Sources of Aerosol in Launceston,Australia, during Winter 1997

ABSTRACT

As part of a pilot study into the chemical and physical properties of Australian fine particles, a suite of aerosol samples was collected at Ti Tree Bend in Launceston, Tasmania, during June and July 1997. This period represents midwinter in the Southern Hemisphere, a period when aerosol sources in Launceston are dominated by smoke from domestic wood burning. This paper describes the results from this measurement campaign, with the aim of assessing the effect of wood smoke on the chemical and physical characteristics of ambient aerosol. A micro orifice uniform deposit impactor (MOUDI) was used to measure the size distributions of the aerosol from 0.05 to 20 n m aerodynamic diameter. Continuous measurements of fine particle mass were made using a PM_2.5 tapered element oscillating microbalance (TEOM) and light scattering coefficients at 530 nm were measured with nephelometers.

Mass size distributions tended to be bimodal, with the diameter of the dominant mode tending to smaller sizes with increases in total mass. Non-sea salt potassium and polycyclic aromatic hydrocarbons (PAHs) were used as chemical tracers for wood smoke. Wood smoke was found to increase absolute particle mass (enough to regularly exceed air quality standards), and to concentrate mass in a single mode below 1 μm aerodynamic diameter. The acid-base equilibrium of the aerosol was altered by the wood smoke source, with free acidity hydrogen ion, non-sea salt sulfate, and ammonium concentrations being higher and the concentration of all species, including nitrate (to differing extents), focused in the fine particle size ranges. The wood smoke source also heavily influenced the aerosol scattering efficiency, adding to a strong diurnal cycle in both mass concentration and light scattering.