Effect of cold-temperature shock on nitrification.

Nitrification is known as the most temperature-sensitive step among the biological processes in wastewater treatment. The purpose of this study was to investigate the effect of temperature on nitrification, in the case of a sharp decrease of temperature, and to compare this effect with that of a gradual temperature decrease. It was found that a sudden temperature decrease affected nitrification much more than predicted. The immediate decrease of temperature by 10 degrees C led to a 20% larger decrease of specific nitrification rate than predicted by the temperature correction factor of 1.072. The change of nitrification rate resulting from a gradual temperature decrease was modeled correctly with the current default temperature correction factor of 1.072. It was concluded that the correction factor actually can be applied to a gradual temperature-change situation; however, in the case of a sudden temperature decrease, measures need to be taken to avoid nitrifier washout.     

Photocatalytic degradation of volatile organic compounds at the gas-solid interface of a TiO2 photocatalyst

In the present work, photocatalytic degradation of volatile organic compounds including gas-phase trichloroethylene (TCE), acetone, methanol and toluene over illuminated TiO2 was closely examined in a batch photoreactor as a function of water vapor, molecular oxygen and reaction temperature. Water vapor enhanced the photocatalytic degradation rate of toluene, but was inhibitive for acetone, and, there was an optimum water vapor concentration in the TCE and methanol removal. In a nitrogen atmosphere, it showed lower photocatalytic degradation rate than in air and pure oxygen. Thus, it could be concluded that oxygen is an essential component in photocatalytic reactions by trapping photogenerated electrons on the semiconductor surface and by decreasing the recombination of electrons and holes. As for the influence of reaction temperature, it was found that photocatalytic degradation was more effective at a moderate temperature than at an elevated temperature for each compound.     

Remediation of arsenic-contaminated soils and washing effluents

Laboratory experiments were conducted to determine the distribution of various arsenic species in tailings and soils. Other specific goal of the tests were to evaluate the extraction efficiency of arsenic using alkaline or acid washing, to determine optimum operational parameters of alkaline washing, and to evaluate the arsenic precipitation of washing effluents by pH adjustment or ferric chloride addition. Alkaline washing using sodium hydroxide was found to be favorable in removing arsenic from tailings or soils having a higher portion of arsenic in the operationally defined crystalline mineral fraction of crystalline oxide and amorphous aluminosilicates. This is due to the ligand displacement reaction of hydroxyl ions with arsenic species and high pH conditions that can prevent readsorption of arsenic because predominant negatively charged crystalline oxides do not attract the negatively charged oxyanions. For tailings, sodium hydroxide had 10-20 times higher extraction efficiencies than hydrochloric- or citric acid. The optimum concentration of sodium hydroxide for soil washing was determined to be 200 mM for all samples, while the optimum ratios were 10:1 and 5:1 for tailings and field/river sedimentary soils, respectively. The washing effluent of river soil was effectively treated by adjusting pH to 5-6 with hydrochloric acid, resulting in arsenic concentrations of <50 microgl(-1). In the case of field soil effluent, an addition of ferric chloride with a minimum mass ratio of 11 (Fe/As) was needed to reduce the arsenic below 50 microgl(-1).     

Assessing the effects of surface-bound humic acid on the phototoxicity of anatase and rutile TiO2 nanoparticles in vitro

In this study,the cytotoxicity of two different crystal phases of TiO₂ nanoparticles,with surface modification by humic acid（HA）,to Escherichia coli,was assessed.The physicochemical properties of TiO₂ nanoparticles were thoroughly characterized.Three different initial concentrations,namely 50,100,and 200 ppm,of HA were used for synthesis of HA coated TiO₂ nanoparticles（denoted as A/RHA50,A/RHA100,and A/RHA200,respectively）.Results indicate that rutile（LC50（concentration that causes 50%mortality compared the control group）=6.5）was more toxic than anatase（LC₅0=278.8）under simulated sunlight（SSL）irradiation,possibly due to an extremely narrow band gap.It is noted that HA coating increased the toxicity of anatase,but decreased that of rutile.Additionally,AHA50 and RHA50had the biggest differences compared to uncoated anatase and rutile with LC₅0of 201.9 and21.6,respectively.We then investigated the formation of reactive oxygen species（ROS）by TiO₂ nanoparticles in terms of hydroxyl radicals（OH）and superoxide anions（O₂^-）.Data suggested that O₂^- was the main ROS that accounted for the higher toxicity of rutile upon SSL irradiation.We also observed that HA coating decreased the generation of OH and O₂^- on rutile,but increased O₂^- formation on anatase.Results from TEM analysis also indicated that HA coated rutile tended to be attached to the surface of E.coli more than anatase.     

Study of fine sediments for making lightweight aggregate.

The objective of this study was to investigate the recycling of the fine sediments of Shih-Men Reservoir to manufacture lightweight aggregate. By qualitative and quantitative analysis of the fine sediment and sintered aggregate through soil test, X-ray fluorescence, X-ray diffraction and scanning electron microscopy, a strategy of recycling fine sediment as aggregate for other similar material is proposed. The test results indicate that such fine sediment can be classified as low plastic clay, and clay of such chemical composition is located in the Riley's 'area of bloating'. The particle density of sintered lightweight aggregate decreases when the sintering temperature increases especially above 1200 degrees C due to phase transformation and formation of a vitrified layer on the surface through subsequent dehydration, bloating and collapsing stages. Our findings show that the fine sediment of Shin-Men Reservoir could be a suitable raw material for making expanded lightweight aggregate sintered at 1200 to 1300 degrees C for 10 to 12 min by a programmable furnace and a diffusion process.     

Effects of heavy rainfall on the composition of airborne bacterial communities

Wet deposition scavenges particles and particle-associated bacteria from the air column, but the impact of raindrops on various surfaces on Earth causes emission of surface-associated bacteria into the air column. Thus, after rainfall, these two mechanisms are expected to cause changes in airborne bacterial community composition (BCC). In this study, aerosol samples were collected at a suburban site in Seoul, Korea before and after three heavy rainfall events in April, May, and July 2011. BCC was investigated by pyrosequencing the 16S rRNA gene in aerosol samples. Interestingly, the relative abundance of non-spore forming Actinobacteria operational taxonomic units (OTUs) was always higher in post-rain aerosol samples. In particular, the absolute and relative abundances of airborne Propionibacteriaceae always increased after rainfall, whereas those of airborne Firmicutes, including Carnobacteriaceae and Clostridiales, consistently decreased. Marine bacterial sequences, which were temporally important in aerosol samples, also decreased after rainfall events. Further, increases in pathogen-like sequences were often observed in post-rain air samples. Rainfall events seemed to affect airborne BCCs by the combined action of the two mechanisms, with potentially adverse effects on human and plant health.

Open image in new window

     

Epipelagic mesozooplankton succession and community structure over a marine ouffall area in the northeastern South China Sea

This study analyses distribution and abundance patterns of mesozooplankton communities at 13 stations in the coastal waters over a marine outfall area in the northeastern South China Sea. Cruises were conducted in March, June and September 2002, and plankton samples were collected with a 333 microm North Pacific net. The Mesozooplankton was dominated by calanoid Copepods, Cladocera, Chaetognatha and Pteropoda. Stations located near the entrance of the harbor provided a relatively higher abundance of Noctilucales and Radiolarians. In total, 20 zooplankton groups were identified in which, Calanoida, Cladocera, Chaetognatha, Pteropoda, Poecilostomatoida and Appendicularia comprised 92.77% of the total zooplankton abundance. Copepoda dominated in all three cruises, comprising 65.32% of the total mesozooplankton abundance. Samples collected in June recorded higher mesozooplankton abundance than March and September samples. Onshore stations recorded higher BOD values, higher abundance of Noctilucales and Radiolarians and a relativelylower abundance of the overall mesozooplankton. Total mesozooplankton abundance did not correlate significantly with temperature, pH, or dissolved oxygen, but correlated negatively with BOD.     

Environmental assessment on electrokinetic remediation of multimetal-contaminated site: a case study

In this study, an environmental assessment on an electrokinetic (EK) system for the remediation of a multimetal-contaminated real site was conducted using a green and sustainable remediation (GSR) tool. The entire EK process was classified into major four phases consisting of remedial investigations (RIs), remedial action construction (RAC), remedial action operation (RAO), and long-term monitoring (LTM) for environmental assessment. The environmental footprints, including greenhouse gas (GHG) emissions, total energy used, air emissions of criteria pollutants, such as NO_x, SO_x, and PM₁₀, and water consumption, were calculated, and the relative contribution in each phase was analyzed in the environmental assessment. In the RAC phase, the relative contribution of the GHG emissions, total energy used, and PM₁₀ emissions were 77.3, 67.6, and 70.4 %, respectively, which were higher than those of the other phases because the material consumption and equipment used for system construction were high. In the RAO phase, the relative contributions of water consumption and NO_x and SO_x emissions were 94.7, 85.2, and 91.0 %, respectively, which were higher than those of the other phases, because the water and electricity consumption required for system operation was high. In the RIs and LTM phases, the environmental footprints were negligible because the material and energy consumption was less. In conclusion, the consumable materials and electrical energy consumption might be very important for GSR in the EK remediation process, because the production of consumable materials and electrical energy consumption highly affects the GHG emissions, total energy used, and air emissions such as NO_x and SO_x.     

Identification of the sources of PM10 in a subway tunnel using positive matrix factorization

The level of particulate matter of less than 10 μm diameter (PM₁₀) at subway platforms can be significantly reduced by installing a platform screen-door system. However, both workers and passengers might be exposed to higher PM₁₀ levels while the cars are within the tunnel because it is a more confined environment. This study determined the PM₁₀ levels in a subway tunnel, and identified the sources of PM₁₀ using elemental analysis and receptor modeling. Forty-four PM₁₀ samples were collected in the tunnel between the Gireum and Mia stations on Line 4 in metropolitan Seoul and analyzed using inductively coupled plasma–atomic emission spectrometry and ion chromatography. The major PM₁₀ sources were identified using positive matrix factorization (PMF). The average PM₁₀ concentration in the tunnels was 200.8 ± 22.0 μg/m³. Elemental analysis indicated that the PM₁₀ consisted of 40.4% inorganic species, 9.1% anions, 4.9% cations, and 45.6% other materials. Iron was the most abundant element, with an average concentration of 72.5 ± 10.4 μg/m³. The PM₁₀ sources characterized by PMF included rail, wheel, and brake wear (59.6%), soil combustion (17.0%), secondary aerosols (10.0%), electric cable wear (8.1%), and soil and road dust (5.4%). Internal sources comprising rail, wheel, brake, and electric cable wear made the greatest contribution to the PM₁₀ (67.7%) in tunnel air.

ImplicationsWith installation of a platform screen door, PM₁₀ levels in subway tunnels were higher than those on platforms. Tunnel PM₁₀ levels exceeded 150 μg/m³ of the Korean standard for subway platform. Elemental analysis of PM₁₀ in a tunnel showed that Fe was the most abundant element. Five PM₁₀ sources in tunnel were identified by positive matrix factorization. Railroad-related sources contributed 68% of PM₁₀ in the subway tunnel.     

Water-soluble characteristics of chlorine in char derived from municipal solid wastes

Chlorine in char derived from municipal solid waste (MSW) was characterized and quantified based on its water solubility: easily water-soluble, hardly water-soluble, and non-water-soluble chlorine. For that, a four-cycle process of water-washing, heating or carbonation were carried out. In order to confirm the characteristics of non-water-soluble chlorine, additional thermal treatment and an alkali-acid washing process were applied to washed char. It was found that a large particle size of char (0.5-1.0 mm) significantly contributed to the amount of non-water-soluble chlorine. Pulverization and HNO3-HF digestion were performed to identify a factor to interfere chlorine release from char with a large particle size. Pulverization was proven ineffective for release of non-water-soluble chlorine, whereas approximately 32% of non-water-soluble chlorine was extracted by HNO3-HF digestion. Therefore, the presence of non-water-soluble chlorine is likely to originate from its chemical property rather than simply from its physical one.