影响富营养化水体沉水植物修复的生态因子探讨

日益严重的水体富营养化现象,不仅降低了它的使用功能,也使水生态系统日趋退化,从而制约了当地社会经济的可持续发展。利用组建或重建沉水植物技术净化水质或进行水体生态修复是一种有效的生态工程措施。本文综述了光照、pH、营养盐、重金属、悬浮颗粒物及着生藻类等生态因子对沉水植物修复的影响和修复时应注意的问题。     

垃圾渗滤液的膜生物反应器与传统生物工艺述评

采用文献调研法比较评价了膜生物反应器与传统生物工艺对垃圾渗滤液的处理效果。结果表明,渗滤液的水质特征(主要指COD)主要由渗滤液年龄决定,B/C值和渗滤液年龄对COD去除有重要影响。传统生物处理常采用多级组合工艺,渗滤液特性、工艺单元数、水力停留时间和有机负荷率等是影响COD去除的重要参数。近年来,MBR工艺的应用日益广泛,对于B/C值较低的老龄渗滤液,MBR工艺可获得更好的COD去除效果,也有利于废水的膜深度处理。     

峡山地不同垂直带土壤层的水文功能及其影响因子

渗透性能和持水能力是土壤重要的水力学性质,是土壤调节径流、保持水土和涵养水源等水文功能的基础。以三峡库首的夷陵-大老岭山地为对象,采集亚高山棕壤针叶林地、中山黄棕壤针阔混交林与茶园地和低山黄壤针叶林地等4个样点剖面的土壤样品,在室内进行土壤饱和导水率、水分特征曲线和理化性质测定,量化了不同样地土壤渗透性能、持水能力和水分库容等水文功能参数,并明确了其主要影响因子。结果表明: 研究区山地土壤饱和导水率在0.06～14.78 mm/min之间,亚高山棕壤和中山黄棕壤林地土壤渗透性能较好,其平均饱和导水率在7.15～14.78 mm/ min之间,低山黄壤次之（1.3 9 mm/min）,中山黄棕壤茶园土壤渗透能力最差（1.17 mm/min）。不同类型土壤的饱和含水量、毛管含水量、田间持水量存在较大差异,凋萎含水量差异较小。同一类型土壤的不同发生层内,土壤饱和含水量随土壤深度的增加而递减,毛管持水量和田间持水量随土层深度的增加波动上升。不同样地间土壤水分总库容差异较大,随着海拔的升高,土壤水分总库容增加。土壤水分特征参数与土壤性质的相关分析表明,饱和导水率与土壤总孔隙度呈显著正相关,与容重呈显著负相关;饱和含水量、毛管持水量、田间持水量均与土壤总孔隙度、粘粒含量呈显著性正相关,与容重呈显著负相关;饱和含水量与根系重量呈显著正相关;毛管持水量、田间持水量与砂粒含量呈显著负相关。与中山茶园地和低山黄壤林地相比,亚高山棕壤和中山黄棕壤林地渗透性能较好且持水性更强,具有更好的调蓄径流和涵养水源的水文功能。 关键词： 山地土壤;土壤孔隙度;饱和导水率;持水能力;三峡库区     

环境安全：21世纪人类面临的根本问题

本文从人类社会的可持续进步和国家的可持续发展两个层面,深层次地分析了环境安全问题的不可替代的重要性,并从理论和实践两个方面得出：第一,我国应将环境安全的保证能力作为综合国力的重要组成部分;第二,应将环境安全观作为指导我国21世纪两大战略-加入WTO和西部大开发的重要方针。     

阿特拉津在土壤中的生物降解研究

运用恒温培养法研究了阿特拉津在河北省白洋淀地区农田土壤中的生物降解动力学,并从中分离鉴定了土壤中降解阿特拉津的优势菌种,研究结果表明,该土壤对阿特拉津具有一定的降解能力,非生物＋生物的降解、非生物降解和生物降解的速率分别为０．０２６２ｄ＾－１,０．００５５４８ｄ＾－１和０．００８１９４ｄ＾－１,半衰期分别为２６ｄ,１２５ｄ和８５ｄ,发现土壤中降解阿特拉津的优势菌种为蜡状芽孢杆菌（Ｂａｃｉｌｌｕｓ     

Accumulation of lead, zinc, copper and cadmium by 12 wetland plant species thriving in metal-contaminated sites in China

The concentrations of lead, zinc, copper and cadmium accumulated by 12 emergent-rooted wetland plant species including different populations of Leersia hexandra, Juncus effusus and Equisetum ramosisti were investigated in field conditions of China. The results showed that metal accumulation by wetland plants differed among species, populations and tissues. Populations grown in substrata with elevated metals contained significantly higher metals in plants. Metals accumulated by wetland plants were mostly distributed in root tissues, suggesting that an exclusion strategy for metal tolerance widely exists in them. That some species/populations could accumulate relatively high metal concentrations (far above the toxic concentration to plants) in their shoots indicates that internal detoxification metal tolerance mechanism(s) are also included. The factors affecting metal accumulation by wetland plants include metal concentrations, pH, and nutrient status in substrata. Mostly concentrations of Pb and Cu in both aboveground and underground tissues of the plants were significantly positively related to their total and/or DTPA-extractable fractions in substrata while negatively to soil N and P, respectively. The potential use of these wetland plants in phytoremediation is also discussed.     

Pollution sources identification of polycyclic aromatic hydrocarbons of soils in Tianjin area, China

A total of 188 surface soil samples were collected from different types of utilization soils in Tianjin area. Factor analysis and scatter point surface tension spine function interpolation were used to analyze types and spatial distributions of PAH sources of surface soils in Tianjin area. The results showed that most pollution sources were mixed sources including coal burning and petroleum spill. Mixed sources occupied 56.12%, 58.96%, 46.45% and 59.50% in farmland of wastewater irrigation, common farmland, wild land and city greenbelt, respectively. Other pollution sources such as vehicle emission, biogenic conversion, wood burning and natural gas combustion were also significant. The spatial distributions of pollution sources were closely related to geographic location, geographic condition and living habit of indigenes.     

典型进口再生塑料颗粒中重金属溶出特性及其影响因素

为了解我国进口再生塑料颗粒中重金属溶出特性,以某检测机构的5种再生塑料颗粒PP、PE、PS、PET和ABS为研究对象,研究不同温度、不同接触时间和不同模拟液等条件下,再生塑料颗粒中重金属溶出特性。结果表明,在25、40、70 ℃这3种温度下,PP、PE、PET和ABS再生塑料颗粒中重金属铬、铅、锰、镉、汞和铜的溶出量随着温度的升高而增加,PS中重金属浓度随温度升高变化不大;随着接触时间的增长,样品中的6种重金属Cr、Pb、Mn、Cu、Cd、Hg溶出量增长趋势由快至慢,5种再生塑料颗粒中重金属Cr的溶出浓度最高;PE、PS、PET和ABS再生塑料颗粒在4种模拟液中重金属溶出量大小整体呈现出：50%乙酸>3%乙酸>10%乙醇>95%乙醇,但PP再生塑料颗粒中重金属Cu在3%乙酸中的溶出量比10%乙醇中的多。本研究结果可为建立塑料接触材料及制品中重金属溶出量的标准方法提供依据。     

试用模糊数学方法对电焊作业防护措施进行综合评价

选择北京市四家锅炉厂的电焊工５６名，即从事手把焊、氩弧焊、ＣＯ２气体保护焊、电弧气爆等特种工种作业人员。通过调查，提出单项四级评分标准，再依模糊数学模型，进行综合评价。按Ｂ＝Ａ·Ｒ，求得Ｂ中最大元为０．７０７。最后总评为甲级。此结果与权数分配有关。此方法，可为劳动卫生管理（防护措施评级）提供依据。     

钻井废水的处理

本文针对钻井废水的处理，综述了现有的处理方法、处理药剂以及处理装置，并对钻井废水的处理、排放提出了一些意见和建议。