Removal of Prussian blue from contaminated soil in the rhizosphere of cyanogenic plants

The fate of radiolabeled cyanide in soil was investigated during exposure to cyanogenic plant species, sorghum (Sorghum bicolor var. P721) and flax (Linum usitassimum var. Omega-Gold), in fully-contained growth chambers. Labeled cyanide was subject to microbial transformation, assimilation by plant roots, incorporation and biodegradation in plant tissue. For this study, (14)C-labeled cyanide was added to soil, and distribution of (14)C activity was assessed before plant establishment and after harvest. After 3 months of plant growth, 7% of the (14)C-labeled cyanide was converted to (14)CO(2) with sorghum and 6% with flax, compared with only 2% conversion in unplanted soil. A small amount of unaltered cyanide was shown to be accumulated by the plants (approximately 140 mg cyanide/kg plant or <0.1% of the total). Results from this experiment demonstrate the potential of cyanogenic plants for use in phytoremediation of cyanide-contaminated soil.     

Recycling nickel from spent catalyst of Phu My fertilizer plant as a precursor for exhaust gas treatment catalysts preparation

In this study, a very promising way of treating and recycling spent nickel catalysts of fertilizer plants in Vietnam was proposed. Firstly, nickel was recovered from spent catalyst using HNO₃—leaching process. Results show that nickel recovery of over 90% with a purity of over 90% can be achieved with HNO₃ 2.1–2.5 M at 100?°C in 75 min. The residue after leaching is not considered as a hazardous waste according to the Vietnamese regulations. Then, the leachate solution was used as a precursor to prepare a model catalyst for exhaust gas (CO, HC, NO_x) treatment. In comparison with the catalyst prepared from the commercial nickel nitrate solution, the catalyst synthesized from recovered nickel exhibits similar properties and activities. The influence of Ni loading of Ni/alumina catalyst as well as the modification of active phase by some metals addition (Mn, Ba, Ce) was also investigated. It is feasible to modify active phase by transition metals such as Mn, Ba, and Ce for complete oxidation of CO and HC at 270?°C and a reduction of NO_x below 350?°C at high volumetric flow condition (GHSV?=?110.000 h^?1).     

Sorption of imidacloprid and its metabolites on tropical soils

The sorption of imidacloprid (1-[(6-chloro-3-pyridinyl)-methyl]-N-nitro-2-imidazolid-inimine ) (IMI) and its metabolites imidacloprid-urea (1-[(6-chloro-3-pyridinyl)-methyl]-2-imidazol-idinone) (IU), imidacloprid-guanidine (1-[(6-chloro-3-pyridinyl)-methyl]-4,5-dihydro-1H-imidazol-2-amine) (IG), and imidacloprid-guanidine-olefin (1-[(6-chloro-3-pyridinyl)methyl]-1H-imidazol-2-amine) (IGO) was determined on six typical Brazilian soils. Sorption of the chemicals on the soil was characterized using the batch equilibration method. The range and order of sorption (Kd) on the six soils was IG (4.75-134) > or = IGO (2.87-72.3) > IMI (0.55-16.9) > IU (0.31-9.50). For IMI and IU, Kd was correlated with soil organic carbon (OC) content and CEC, the latter due to the high correlation between OC and cation exchange capacity (CEC) (R2 = 0.98). For IG and IGO, there was no correlation of sorption to clay, pH, OC or CEC due to the high sorption on all soils. Average Koc values were IU = 170, IMI = 362, IGO = 2433, and IG = 3500. Although Kd and Koc values found were consistently lower than those found in soils developed in non-tropical climates, imidacloprid and its metabolites were still considered to be slightly mobile to immobile in Brazilian soils.     

Correlations between experimental and predicted equilibrium distribution coefficient of chlorobenzene and chlorophenol compounds in soil-water systems using partial solubility parameters

Many pesticides are degraded to become chlorinated aromatic compounds in soils. Equilibrium distribution of chlorobenzene and chlorophenol compounds in soil-water systems of Yangmingshan loam, Pingcheng silty clay loam and Annei silty loam was studied with the integral distribution equilibrium equation involving the partial solubility parameters of the chemicals. If the adsorption of chemicals on soils is partitioning in soil organic matter surrounding the soil mineral particles, the absorption constant (Kd) of a chemical in soil-water system could be stated as the distribution coefficient (or partition constant, Koc) of the chemical in the two adjunct immiscible phases--water and soil organic matter. The distribution coefficient (Koc) of chemicals calculated from the integral distribution equilibrium equation agrees well with the experimental adsorption coefficient (Kd, or experimental Koc) of chemicals determined in this study, for all the three different types of soils in water according to multiple-regression analysis. Reference data of Karger or Tijssen are employed to estimate the Koc for both polar and non-polar chemicals. The integral distribution equilibrium equation can exactly describe the distribution behavior of nonionic compound of chlorobenzenes and chlorophenols in soil-water systems.     

Soil dissipation of juvenile hormone analog insecticide pyriproxyfen and its effect on the bacterial community

This investigation was undertaken to examine the dissipation rate of pyriproxyfen as well as the change in the soil bacterial community. Residues of pyriproxyfen were measured using high performance liquid chromatography (HPLC) and the changes in bacterial community were determined by comparing the 16S rDNA bands on patterns by denaturing gradient gel electrophoresis (DGGE). The dissipation of pyriproxyfen was affected by both the concentration applied and incubation temperature. Lower concentrations (1 mg Kg(-1)) and higher incubation temperatures (30 and 40°C) showed more rapid dissipation rates. The population of microbial community decreased rapidly after incubation with 10 mg Kg(-1) of pyriproxyfen for 91 days, indicating the toxicity of pyriproxyfen toward bacterial communities in a closed soil ecosystem. Lower concentrations of pyriproxyfen showed less toxicity toward the microbial community. From cluster analysis, the structure of the bacterial community showed roughly a 60 % similarity throughout the experiment period in the control experiment, indicating the stability within soil microbiota without chemical agitation. However, the similarity was lower than 50 % both in the one and 10 mg Kg(-1) of insecticide pyriproxyfen spiked experiment, indicating the soil bacterial community changed after the insecticide pyriproxyfen was applied.     

Polyelectrolyte enhanced ultrafiltration (PEUF) for the removal of Cd(II): effects of organic ligands and solution pH

This study focused on the effects of pH and organic ligands, namely ethylenediaminetetraacetic acid (EDTA), nitrilotriacetic acid (NTA), and citric acids, on the removal and recovery of Cd(II) in polyelectrolyte enhanced ultrafiltration (PEUF). Polyethylenimine (PEI), which can bind with both positively charged metal ions by coordination bonding and negatively charged ligand-metal complexes by charge attraction, was employed as a chelating polymer. The removal and recovery of Cd species was greatly dependent on the chemistry of organic ligands according to solution pH, particularly being related to the distribution of Cd-ligand complexes at different pH levels. In the presence of EDTA, the dominant Cd species are negatively charged Cd(EDTA)(2-) and CdH(EDTA)(-) over the range of pH levels investigated, interacting with PEI via electrostatic attraction and being less pH dependent. On the other hand, the pH effects of both NTA and citric acid systems are similar to that for the system without organic ligands. This was associated with the fact that free Cd ions were predominant at the acidic pH range in both NTA and citric acid systems.     

Mechanical Properties and Isothermal Crystallization Behaviour of Poly(lactide)/Poly(methyl methacrylate)/α-Cellulose Composites

Polylactide (PLA)/polymethylmethacrylate (PMMA)/α-cellulose composites were fabricated using a twin-screw extruder. During fabrication, α-cellulose short fibres were incorporated for improving the toughness of the brittle PLA and a chain extender was used for reducing PLA hydrolysis. Highly transparent PLA and PMMA were blended to obtain miscible and transparent blends. For evaluating the performance of the PLA/PMMA/α-cellulose composites, a series of measurements, including tensile and Izod impact tests, light transmission and haze measurements, thermomechanical analysis, and determination of isothermal crystallisation behaviour, was conducted. Adding the chain extender considerably reduced the occurrence of hydrolytic degradation. Both the chain extender and α-cellulose short fibres increased the elongation at break and Izod impact strength of the composites. Compared with the neat PLA, including 1.0 wt% α-cellulose short fibres increased the elongation at break and Izod impact strength of the composite PLA by approximately 211 and 219 %, respectively. According to the observed mechanical performance, the optimal blending ratios for PLA and PMMA were between 90:10 and 80:20. The total light transmittance of the composites was as high as 91 %, indicating that the PLA/PMMA blend was highly miscible. The haze value of the PLA/PMMA/α-cellulose composites was lower than 32 %. Incorporating cellulose short fibres increased the number of crystallisation sites and crystallinity of the PLA/PMMA/α-cellulose composites while reducing the spherulite dimensions.