Leachability of printed wire boards containing leaded and lead-free solder

Due to environmental concerns and regulatory initiatives, electronics manufacturers are replacing the tin/lead solder commonly used on printed wire boards (PWBs) with alternative solders. To determine the potential waste management impacts of the alternative solders versus the tin/lead solder, two leaching tests on PWBs manufactured with five alternative types of solder were performed: the toxicity characteristic leaching procedure (TCLP) and the synthetic precipitation leaching procedure (SPLP). These tests are commonly used in the US regulatory community to assess pollutant leachability in different disposal scenarios. The article discusses the application and limitations of these tests. The five types of solders investigated were 63Sn/37Pb, 99.3Sn/0.7Cu, 95.5Sn/4Ag/0.5 Cu, 96Sn/2.5Ag/1Bi/0.5Cu, and 42Sn/1Ag/57Bi. The leaching tests were conducted on four PWB sections, each with a unique configuration and solder density. The largest lead concentrations were observed from the PWBs containing Sn/Pb solder, with concentrations exceeding the hazardous waste toxicity characteristic (TC) in TCLP leachates. Silver, the other regulated element used in the solders, was rarely detected, with none of the samples exceeding the TC limit for silver. High copper concentrations were observed and were determined to result from the PWB itself, not from the copper-containing solders.     

Verification results of jet resonance-enhanced multiphoton ionization as a real-time PCDD/F emission monitor

A jet resonance-enhanced multiphoton ionization (REMPI) monitor was tested on a hazardous-waste-fired boiler for its ability to determine concentrations of polychlorinated dibenzodioxins and dibenzofurans (PCDDs/Fs). Jet REMPI is a real-time instrument capable of highly selective and sensitive (from parts per billion to parts per trillion) detection of a broad range of aromatic compounds, including a number of air toxic compounds. The PCDD/F toxic equivalency (TEQ) value was derived from a predetermined correlation (R ² = 0.74) with monochlorobenzene (MClBz). This relationship was applied to nine subsequent jet REMPI on-line measurements of MClBz and parallel, standard extractive sampling for PCDD/F TEQ. For high waste-firing rates, with a range of PCDD/F TEQ values between 3.9 and 6.0 ng TEQ/m³, the TEQ values predicted by jet REMPI had a relative difference of 26% with the standard EPA Method 23 results. At low waste-firing rates (0.9–1.6 ng TEQ/m³), the relative difference increased to 219%. This limited testing shows that jet REMPI has promise as an on-line diagnostic monitor, providing feedback on the effects on PCDD/F emissions of operating parameter changes such as fuel feed interruptions or air pollution control failures.     

Assessing hydrological impact of potential land use change through hydrological and land use change modeling for the Kishwaukee River basin (USA)

We connected a cellular, dynamic, spatial urban growth model and a semi-distributed continuous hydrology model to quantitatively predict streamflow in response to possible future urban growth at a basin scale. The main goal was to demonstrate the utility of the approach for informing public planning policy and investment choices. The Hydrological Simulation Program-Fortran (HSPF) was set up and calibrated for the Kishwaukee River basin in the Midwestern USA and was repeatedly run with various land use scenarios generated either by the urban growth model (LEAMluc) or hypothetically. The results indicate that (1) the land use scenarios generated by LEAMluc result in little changes in total runoff but some noticeable changes in surface flow; (2) the argument that low flows tend to decrease with more urbanized areas in a basin was confirmed in this study but the selection of indicators for low flows can result in misleading conclusions; (3) dynamic simulation modeling by connecting a distributed land use change model and a semi-distributed hydrological model can be a good decision support tool demanding reasonable amount of efforts and capable of long-term scenario-based assessments.     

Indicators for managing biosolids in Ireland

Sustainable development indicators (SDIs) have emerged as a tool to measure progress towards sustainable development for a number of fields. However, no indicator initiative to date has been aimed at biosolids management at local authority, regional or national levels. This paper presents a study where stakeholders involved in the management of biosolids in Ireland participated in the development of SDIs for managing biosolids at the local/regional level. A significant 81% of participating stakeholders find SDIs either 'useful' or 'very useful' as a tool for managing biosolids. A suite of 22 indicators has been developed and arranged according to the driving force-pressure-state-impact-response (DPSIR) indicator framework. The indicators address all the domains of biosolids management namely, production, quality, cost, legislation/regulation, training/research and recycling/disposal. The stakeholder approach is recognition that no effective indicator set can be developed without the input of stakeholders.     

Identifying Linkages Between Land Use,Geomorphology, and Aquatic Habitat in a Mixed-Use Watershed

The potential impacts of land use on large woody debris (LWD) were examined in Sourdough Creek Watershed, a rapidly growing area encompassing Bozeman, Montana, USA. We identified six land classes within a 250 m buffer extending on either side of Sourdough Creek and assessed aquatic habitat and geomorphologic variables within each class. All LWD pieces were counted, and we examined 14 other variables, including undercut bank, sinuosity, and substrate composition. LWD numbers were generally low and ranged from 0 to 8.2 pieces per 50 m of stream. Linear regression showed that LWD increased with distance from headwaters, riparian forest width, and sinuosity in four of the six land classes. Statistically significant differences between land classes for many aquatic habitat and geomorphologic variables indicated the impacts of different land uses on stream structure. We also found that practices such as active wood removal played a key role in LWD abundance. This finding suggests that managers should prioritize public education and outreach concerning the importance of in-stream wood, especially in mixed-use watersheds where wood is removed for either aesthetic reasons or to prevent stream flooding.     

Risks older drivers pose to themselves and to other road users

Problem

Studies have shown that older drivers have high death rates and lower rates of involvement in crashes that kill others; but most studies have not considered drivers' responsibility for their crashes, and many have considered only one particular measure of risk.

Method

This study examines risks that drivers of various ages pose to themselves and to others on per-driver, per-trip, and per-mile bases, taking responsibility for crashes into account, using United States fatal crash data from 1999 through 2003 and travel estimates from 2001.

Results

Relative to other age groups, drivers aged 85 and older face the highest risk of their own death, whereas teens pose the greatest risk to passengers, occupants of other vehicles, and non-motorists.

Discussion

The oldest drivers pose more risk to other road users than middle-aged drivers do; the degree of their excess risk depends strongly upon how risk is measured.

Impact on industry

These results demonstrate the importance of keeping clear the meaning and implications of various risk measures.     

Biofiltration kinetics of a gaseous aldehyde mixture using a synthetic matrix

Although aldehydes contribute to ozone and particulate matter formation, there has been little research on the biofiltration of these volatile organic compounds (VOCs), especially as mixtures. Biofiltration degradation kinetics of an aldehyde mixture containing hexanal, 2-methylbutanal (2-MB), and 3-methylbutanal (3-MB) was investigated using a bench-scale, synthetic, media-based biofilter. The adsorption capacity of the synthetic media for a model VOC, 3-methylbutanal, was 10 times that of compost. Periodic residence time distribution analysis (over the course of 1 yr) via a tracer study (84-99% recovery), indicated plug flow without channeling in the synthetic media and lack of compaction in the reactor. Simple first-order and zero-order kinetic models both equally fit the experimental data, yet analysis of the measured rate constants versus fractional conversion suggested an overall first-order model was more appropriate. Kinetic analysis indicated that hexanal had a significantly higher reaction rate (k = 0.09 +/- 0.005 1/sec; 23 +/- 1.3 ppmv) compared with the branched aldehydes (k = 0.04 +/- 0.0036 1/sec; 31 +/- 1.6 ppmv for 2-MB and 0.03 +/- 0.0051 1/sec; 22 +/- 1.3 ppmv for 3-MB). After 3 months of operation, all three compounds reached 100% removal (50 sec residence time, 18-46 ppmv inlet). Media samples withdrawn from the biofilter and observed under scanning electron microscopy analysis indicated microbial growth, suggesting removal of the aldehydes could be attributed to biodegradation.     

Contingent Valuation and Real Economic Commitments: Evidence from Electric Utility Green Pricing Programmes

This paper presents the findings of two 'green pricing' studies conducted to evaluate public support of utilities' investments in renewable energy technologies. These studies compared hypothetical WTP statements with actual payment commitments. The results of these studies indicate that the CVM can be an accurate indicator of an individual's WTP, but that it is an unreliable predictor of which individuals will actually pay. This has important implications for aggregating mean WTP estimates of the value of environmental benefits. It also suggests that market simulations can be useful for predicting programme participation rates when voluntary donations are used as a payment vehicle.     

Influence of Riffle and Snag Habitat Specific Sampling on Stream Macroinvertebrate Assemblage Measures in Bioassessment

Stream macroinvertebrate communities vary naturally among types of habitats where they are sampled, which affects the results of environmental assessment. We analyzed macroinvertebrates collected from riffle and snag habitats to evaluate influences of habitat-specific sampling on taxon occurrence, assemblage measures, and biotic indices. We found considerably more macroinvertebrate taxa unique to snags (143 taxa) than to riffles (75 taxa), and the numbers of taxa found in both riffles and snags (149 taxa) were similar to that found in snags. About 64% of the 47 macroinvertebrate measures we tested differed significantly between riffles and snags. Eighty percent intercepts of regressions between biotic indices and urban or agricultural land uses differed significantly between riffles and snags. The Hilsenhoff biotic index calculated from snag samples explained 69% of the variance of riffle samples and classified 66% of the sites into the same stream health group as the riffle samples. However, four multimetric indices for snag samples explained less than 50% of the variance of riffle samples and classified less than 50% of the sites into the same health group as the riffle samples. We concluded that macroinvertebrate indices developed for riffle/run habitat should not be used for snag samples to assess stream impairment. We recommend developing an index of biotic integrity specifically for snags and using snags as an alternate sampling substrate for streams that naturally lack riffles.     

An improved dual channel PERCA instrument for atmospheric measurements of peroxy radicals

This paper describes a new dual-channel PEroxy RadiCal Amplification (PERCA) instrument, which has been designed to improve the time resolution and signal to noise and to reduce the interference caused by variations in ambient ozone concentrations. The instrument was run at the Weybourne Atmospheric Observatory (WAO), North Norfolk, during WAOWEX (Weybourne Atmospheric Observatory Winter Experiment) in January/February 2002 and INSPECTRO (Influence of clouds on the spectral actinic flux in the lower troposphere) in September 2002. The performance of the instrument is assessed and compared to that of a single channel instrument. In particular, it is shown how the precision is greatly improved in fluctuating background ozone conditions. In addition the improved time response of the instrument allows changes in peroxy radical concentrations to be related to rapid changes in nitric oxide concentrations and the ozone photolysis frequency, j(O(1)D).