Physical Properties of Chemically Modified Starch(RS4)/PVA Blend Films—Part 1

In this paper, we report on the physical properties of films that have been synthesized by using native corn starch (NS) and chemically modified starch (RS4). NS or RS4/PVA blend films were synthesized by using the mixing process and the casting method. Glycerol (GL), sorbitol (SO), and citric acid (CA) were used as additives. The chemically modified starch (RS4) was synthesized by using sodium trimetaphosphate (STMP) and sodium tripolyphosphate (STPP) as a crosslinker. Then, the RS4 thus synthesized was confirmed by using the pancreatin-gravimetric method, swelling power and an X-ray diffractometer (XRD). Tensile strength (TS), elongation (%E), swelling behavior (SB), and solubility (S) of the films were measured. The result of the measurements indicated the RS4-added film was better than the NS-added film. Especially, the RS4/PVA blend film with CA as an additive showed the physical properties superior to other films.     

Effect of incineration on the removal of key offensive odorants released from a landfill leachate treatment station (LLTS)

As a basic means to control odorants released from a landfill leachate treatment station (LLTS), effluents venting from this station were treated via incineration with methane rich landfill gas (at 750 °C). A list of the key offensive odorants covering 22 chemicals was measured by collecting those gas samples both before and after the treatment. Upon incineration, the concentration levels of most odorants decreased drastically below threshold levels. The sum of odorant intensities (SOIs), if compared between before and after incineration, decreased from 6.94 (intolerable level) to 3.45 (distinct level). The results indicate that the thermal incineration method can be used as a highly efficient tool to remove most common odorants (e.g., reduced sulfur species), while it is not so for certain volatile species (e.g., carbonyls, fatty acids, etc.).     

Biodegradability of Chemically Modified Starch (RS4)/PVA Blend Films: Part 2

Biodegradable films were successfully prepared by using cornstarch (CS), chemically modified starch (RS4), polyvinyl alcohol (PVA), glycerol (GL), and citric acid (CA). The physical properties and biodegradability of the films using CS, RS4, and additives were investigated. The results of the investigation revealed that the RS4-added film was better than the CS-added film in tensile strength (TS), elongation at break (%E), swelling behavior (SB) and solubility (S). Especially, the RS4/PVA blend film with CA as an additive showed physical properties superior to other films. Furthermore, when the film was dried at low temperature, the properties of the films clearly improved because the hydrogen bonding was activated at low temperature. The biodegradation of films was carried out using the enzymatic, microbiological and soil burial test. The enzyme used in this study was amyloglucosidase (AMG), α-amylase (α-AM) and β-amylase (β-AM). At the enzymatic degradation test, the GL-added films had an approximately 60% degradation, while the CA-added films were degraded about 25%. The low degradation value on CA-added film is attributed to low pH of film added CA that deactivated the enzymatic reaction. The microbiological degradation teat was performed by using Bacillus subtilis and Aspergillus niger.     

Potential of anaerobic digestion for material recovery and energy production in waste biomass from a poultry slaughterhouse

This study was carried out to assess the material and energy recovery by organic solid wastes generated from a poultry slaughterhouse. In a poultry slaughterhouse involving the slaughtering of 100,000 heads per day, poultry manure & feather from the mooring stage, blood from the bleeding stage, intestine residue from the evisceration stage, and sludge cake from the wastewater treatment plant were discharged at a unit of 0.24, 4.6, 22.8, and 2.2 Mg day^?1, consecutively. The amount of nitrogen obtained from the poultry slaughterhouse was 22.36 kg 1000 head^?1, phosphate and potash were 0.194 kg 1000 head^?1 and 0.459 kg 1000 head^?1, respectively. As regards nitrogen recovery, the bleeding and evisceration stages accounted for 28.0% and 65.8% of the total amount of recovered nitrogen. Energy recovered from the poultry slaughterhouse was 35.4 N m³ 1000 head^?1 as CH₄. Moreover, evisceration and wastewater treatment stage occupied 88.1% and 7.2% of the total recovered CH₄ amount, respectively.     

Evidence of singlet oxygen and hydroxyl radical formation in aqueous goethite suspension using spin-trapping electron paramagnetic resonance (EPR)

The generation of reactive species in an aqueous goethite suspension, under room light and aeration conditions, was investigated using the electron paramagnetic resonance (EPR) technique employing spin trap agents. The trap reagents, including 5,5-dimethylpyrroline N-oxide (DMPO) and 2,2,6,6-tetramethylpiperidine (TEMP), were used for the detection of OH radicals (OH) and singlet oxygen (¹O₂), respectively. On the addition of DMPO to the goethite suspended solution, a DMPO-OH adduct was formed, which was not decreased, even in the presence of the OH scavenger, mannitol. This result implied a false positive interpretation from the DMPO-OH EPR signal. In the presence of TEMP reagent, a TEMP-O signal was detected, which was completely inhibited in the presence of the singlet oxygen scavenger, sodium azide. With both DMPO-OH and TEMP-O radicals in the presence and absence of radical scavengers, singlet oxygen was observed to be the key species formed in the room-light sensitized goethite suspension. In the goethite/H₂O₂ system; however, both OH and singlet oxygen were generated, with significant portions of DMPO-OH resulting from both OH and singlet oxygen. In fact, the DMPO-OH resulting from OH should be carefully calculated by correcting for the amount of DMPO-OH due to singlet oxygen. This study reports, for the first time, that the goethite suspensions may also act as a natural sensitizer, such as fulvic acids, to form singlet oxygen.     

Effect of biochar amendment on tylosin adsorption-desorption and transport in two different soils

The role of biochar as a soil amendment on the adsorption-desorption and transport of tylosin, a macrolide class of veterinary antibiotic, is little known. In this study, batch and column experiments were conducted to investigate the adsorption kinetics and transport of tylosin in forest and agricultural corn field soils amended with hardwood and softwood biochars. Tylosin adsorption was rapid at initial stages, followed by slow and continued adsorption. Amounts of adsorption increased as the biochar amendment rate increased from 1 to 10%. For soils with the hardwood biochar, tylosin adsorption was 10 to 18% higher than that when using the softwood biochar. Adsorption kinetics was well described by Elovich equation ( ≥ 0.921). As the percent of biochar was increased, the rates of initial reactions were generally increased, as indicated by increasing α value at low initial tylosin concentration, whereas the rates during extended reaction times were generally increased, as indicated by decreasing β value at high initial tylosin concentration. A considerably higher amount of tylosin remained after desorption in the corn field soil than in the forest soil regardless of the rate of biochar amendment, which was attributed to the high pH and silt content of the former. The breakthrough curves of tylosin showed that the two soils with biochar amendment had much greater retardation than those of soils without biochar. The CXTFIT model for the miscible displacement column study described well the peak arrival time as well as the maximum concentration of tylosin breakthrough curves but showed some underestimation at advanced stages of tylosin leaching, especially in the corn field soil. Overall, the results indicate that biochar amendments enhance the retention and reduce the transport of tylosin in soils.     

Application methods affect phosphorus-induced lead immobilization from a contaminated soil

Phosphate rock (PR) and phosphoric acid (PA) are an effective combination of P sources for immobilizing Pb in contaminated soils. This column experiment examined the effectiveness of different application methods on Pb immobilization in a contaminated soil. Phosphate was applied at a P/Pb molar ratio of 4 with half as PR and half PA. While PR was mixed with the soil or placed as a layer, aqueous PA was applied from the top of the column as one or two applications. After 4 wk of incubation, total and soluble Pb and P, TCLP-Pb (toxicity characteristic leaching procedure) and PBET-Pb (physiologically-based extraction test) in the P-treated soil were determined. Phosphate addition effectively reduced leachable Pb to below the EPA drinking water standard of 15 microg L(-1) in all treatments. Mixing both PA and PR with the soil was the most effective method in Pb immobilization, reducing TCLP-Pb by up to 95% and PBET-Pb by 25 to 42%. Application of PR as a layer in the soil column was the most effective in reducing Pb migration (by 73-79%) and minimizing soil acidification and P entrophication, potential drawbacks of PA. Applying PA in two applications was less effective than one application. Mixing PR and PA with the soil plus placing PR as a layer can be employed for effective remediation of Pb-contaminated soils, reducing Pb leachability, bioavailability, and mobility while minimizing soil acidification and P entrophication.     

Using internet search behavior to assess public awareness of protected wetlands

Improving public awareness of protected wetlands facilitates sustainable wetland management, which depends on public participation. One way of gauging public interest is by tracking Internet search behavior (ISB). We assessed public awareness of issues related to protected wetland areas (PWAs) in South Korea by examining the frequencies of specific queries (PWAs, Ramsar, Upo wetland, Sunchon Bay, etc.) using relative search volumes (RSVs) obtained from an Internet search engine. RSV shows how many times a search term is used relative to a second search term during a specific period. Public awareness of PWAs changed from 2007 to 2013. Initially the majority of Internet searches were related to the most well‐known tidal and inland wetlands Sunchon Bay and Upo wetlands, which are the largest existing wetlands in Korea with the greatest historical exposure. Public awareness, as reflected in RSVs, of wetlands increased significantly following PWA designation for the wetlands in 2008, which followed the Ramsar 10th Conference of Contracting Parties to the Convention on Wetlands (COP10) meeting. Public interest was strongly correlated to the number of news articles in the popular media, as evidenced by the increase in Internet searches for specific wetlands and words associated with specific wetlands. Correspondingly, the number of visitors to specific wetlands increased. To increase public interest in wetlands, wetland aspects that enhance wetland conservation should be promoted by the government and enhanced via public education. Our approach can be used to gauge public awareness and participation in a wide range of conservation efforts.     

Morphology and sinking velocities of fecal pellets of copepod, molluscan, euphausiid, and salp taxa in the northeastern tropical Atlantic

Morphological characteristics and sinking velocities of naturally occurring fecal pellets of copepods, euphausiids, salps, and pelagic mollusks collected in the northeastern tropical Atlantic were investigated during the period of May-June 1992. The fecal pellets of copepods and euphausiids were cylindrical and distinguished only by their size. Those of salps were, in general, rectangular, and slight differences were noted according to the species. The fecal pellets of the molluscan pteropod Clio sp. were conical, while those of the molluscan heteropod Carinaria sp. were spiral. The sinking velocities ranged from 26.5 to 159.5 m day^-1 for copepod fecal pellets, from 16.1 to 341.1 m day^-1 for euphausiid pellets, from 43.5 to 1167.6 m day^-1 for salps' pellets (Cyclosalpa affinis, Salpa fusiformis, Iasis zonaria, and two unidentified species), from 65 to 205.7 m day^-1 for Clio sp. pellets, and from 120.3 to 646.4 m day^-1 for Carinaria sp. fecal pellets. The measured sinking velocities were compared with estimates predicted using the equations of Komar et al. (1981; Limnol Oceanogr 26:172-180), Stokes' law, and Newton's second law, using either a constant density of fecal pellets (1.22 g cm^-3) or densities estimated with the three different equations. When a constant density was used, the three equations overestimated the sinking velocities; Stokes' law resulted in the largest overestimation, and Newton's second law, the smallest. At the taxa level, the overestimation was greatest for euphausiid 1 fecal pellets and smallest for copepod fecal pellets. When the three equations were used to estimate fecal pellet density, the density estimated using the equation of Komar et al. was the greatest, and that using Stokes' law, the smallest, resulting in over- and underestimation of sinking velocities, respectively. Newton's second law resulted in an intermediate density and gave the closest estimate of sinking velocities. We propose that measurement of sinking velocities of a portion of the fecal pellets might guide in choosing an appropriate equation to be used for a reasonable interpretation of vertical mass flux.     

Effect of industrial by-products containing electron acceptors on mitigating methane emission during rice cultivation

Three industrial by-products (fly ash, phosphogypsum and blast furnace slag), were evaluated for their potential re-use as soil amendments to reduce methane (CH₄) emission resulting from rice cultivation. In laboratory incubations, CH₄ production rates from anoxic soil slurries were significantly reduced at amendment levels of 0.5%, 1%, 2% and 5% (wt wt⁻¹), while observed CO₂ production rates were enhanced. The level of suppression in methane production was the highest for phosphogypsum, followed by blast slag and then fly ash. In the greenhouse experiment, CH₄ emission rates from the rice planted potted soils significantly decreased with the increasing levels (2–20 Mg ha⁻¹) of the selected amendments applied, while rice yield simultaneously increased compared to the control treatment. At 10 Mg ha⁻¹ application level of the amendments, total seasonal CH₄ emissions were reduced by 20%, 27% and 25%, while rice grain yields were increased by 17%, 15% and 23% over the control with fly ash, phosphogypsum, and blast slag amendments, respectively. The suppression of CH₄ production rates as well as total seasonal CH₄ flux could be due to the increased concentrations of active iron, free iron, manganese oxides, and sulfate in the amended soil, which acted as electron acceptors and controlled methanogens’ activity by limiting substrates availability. Among the amendments, blast furnace slag and fly ash contributed mainly to improve the soil nutrients balance and increased the soil pH level towards neutral point, but soil acidity was developed with phosphogypsum application. Conclusively, blast slag among the selected amendments would be a suitable soil amendment for reducing CH₄ emissions as well as sustaining rice productivity.