深圳市综合水质指数研究及其在水资源资产评估上的应用

自然资源资产评估技术是开展自然资源资产负债表实践和实行环境责任离任审计的重要技术支撑。水资源作为一项重要自然资源,如何有效评估水资源资产是不可回避的问题。论文以深圳市为研究区域,一是采用综合污染指数法和主成分分析法,以总氮、氨氮、总磷、化学需氧量、生化需氧量、固体悬浮物为指标参数构建了深圳市综合水质指数以评价水资源综合水质。二是以该综合水质评估模型为基础,通过采用治污成本法分析综合水质与治污成本间的关系,从而构建深圳市景观水和饮用水资源的价值量评估模型。论文还以深圳市大鹏新区为试点开展了水资源价值量评估,评估结果显示,2015年大鹏新区景观水和饮用水资源的价值量分别为3.60亿、0.35亿元。     

辽东湾潜在褐潮生物时空分布及环境关联

以18S rDNA V4区作为目标基因,利用自行设计的真核浮游植物鉴定引物V4（F/R）,结合高通量测序技术,对辽东湾2014年四季海水中真核浮游植物多样性进行了检测.结果发现了8种潜在褐潮生物：抑食金球藻、金牛微球藻、微拟球藻、颗粒微拟球藻、细小微胞藻、密球藻、普通小球藻、钙质角毛藻,其中前2种生态风险较高,主要分布在辽东湾西南、东南两侧.除抑食金球藻和细小微胞藻为混合营养型外,其他6种均为自养型.细小微胞藻丰度最高（平均161445个/L）,主要分布在秋季;其次是抑食金球藻、金牛微球藻（平均13912,13717个/L）,主要分布在春季;之后为钙质角毛藻、普通小球藻（平均5498,5234个/L）,主要分布在秋季;密球藻（平均1345个/L）,主要分布在夏季;微拟球藻、颗粒微拟球藻最少（平均56,44个/L）,冬季无分布.辽东湾潜在褐潮生物丰度与水温、水深、无机氮、N/P显著相关,其群落结构演替与环境因子关联性有待于进一步研究.     

Potential of secondary aerosol formation from Chinese gasoline engine exhaust

Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds(VOCs). However,little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4–5 hr simulation, which was estimated to represent more than 10 days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol(SOA) production was 426 ± 85 mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.     

Mercury flows in large-scale gold production and implications for Hg pollution control

Large-scale gold production(LSGP) is one of the five convention-related atmospheric mercury(Hg) emission sources in the Minamata Convention on Mercury. However, field experiments on Hg flows of the whole process of LSGP are limited. To identify the atmospheric Hg emission points and understand Hg emission characteristics of LSGP, Hg flows in two gold smelters were studied. Overall atmospheric Hg emissions accounted for 10%–17% of total Hg outputs and the Hg emission factors for all processes were 7.6–9.6 kg/ton. There were three dominant atmospheric Hg emission points in the studied gold smelters, including the exhaust gas of the roasting process, exhaust gas from the environmental fog collection stack and exhaust gas from the converter of the refining process. Atmospheric Hg emissions from the roasting process only accounted for 16%–29% of total emissions and the rest were emitted from the refining process. The overall Hg speciation profile(gaseous elemental Hg/gaseous oxidized Hg/particulate-bound Hg) for LSGP was 34.1/57.1/8.8. The dominant Hg output byproducts included waste acid, sulfuric acid and cyanide leaching residue. Total Hg outputs from these three byproducts were 80% in smelter A and 84% in smelter B. Our study indicated that previous atmospheric Hg emissions from large-scale gold production might have been overestimated.Hg emission control in LSGP is not especially urgent in China compared to other significant emission sources(e.g., cement plants). Instead, LSGP is a potential Hg release source due to the high Hg output proportions to acid and sludge.     

Long-term effects of sliver nanoparticles on the abundance and activity of soil microbiome

正Silver nanoparticles(Ag NPs)are among the most extensively used engineered nanomaterials because of their wellestablished antimicrobial and unique physicochemical properties(Yin et al.,2015).Applications of AgNPs have now been     

海洋平台阴极保护与监测技术的应用

针对海洋平台全浸区的腐蚀情况,着重介绍了阴极保护及其原理、种类及特点,监测系统的组成及设计,探讨阴极保护及监测系统对海洋平台水下防腐的应用意义。     

油气集输管道内防腐技术应用进展

针对油气田集输管道的内腐蚀问题,分别介绍了耐蚀材料、衬里技术、涂镀层技术与药剂防腐技术等管道内防腐技术及其现场应用效果,指出了耐蚀金属材料防腐效果显著,但存在经济效益差的缺点。为降低成本,选用双金属复合管替代耐蚀金属材料,但其焊缝位置腐蚀失效频发,成为制约其应用的薄弱环节。耐蚀非金属材料防腐效果显著,但耐高温性能与力学性能较差,受温度、压力与CO_2、H_2S、固体颗粒等介质成分的影响,衬里技术与涂镀层技术的应用范围受到限制。药剂防腐技术的防护效果与药剂类型、加药工艺密切相关,需要根据腐蚀工况监测结果进行实时调整。针对上述内防腐技术存在的问题,提出了未来内防腐技术的发展方向为改进现有内防腐技术存在的不足,提升其防护效果。同时,应开发防腐效果显著、经济成本低、施工简便、易于推广应用的防腐材料与防腐工艺技术。     

等离子体处理的时效性对芳Ⅲ/双马复合材料耐湿热性能的影响

目的考察等离子体处理前后及其时效性对芳Ⅲ/双马复合材料弯曲强度、界面性能及耐湿热性能的影响。方法用低温射频耦合等离子体处理芳纶纤维表面,分别将未处理的、等离子体刚处理过的和等离子体处理后在空气中放置三天后的纤维通过溶液预浸渍工艺制备芳Ⅲ/双马复合材料预浸料,再经过高温模压成形技术制备芳Ⅲ/双马复合材料单向板。采用万能材料试验机对水煮前后复合材料的弯曲强度和层间剪切强度进行测试,利用扫描电子显微镜对复合材料层间剪切破坏形貌进行观察。结果等离子体处理后,复合材料的吸水率由未处理时的0.51%下降到0.33%,复合材料层间剪切强度由49.4 MPa提高到62.9 MPa。等离子体处理时效后复合材料的吸水率增加到0.69%,复合材料的层间剪切强度下降到56.0 MPa。结论等离子体处理提高了复合材料界面性能,但等离子体处理的时效后,复合材料的界面性能及其耐湿热性能有所下降。等离子体处理及时效性对复合材料的弯曲强度和耐湿热性能变化不大。     

好氧颗粒污泥对有机物吸附类型的研究

为探索好氧颗粒污泥对有机物的去除机制,进行好氧颗粒污泥对有机物的吸附性能及吸附类型研究,在实验室条件下,采用动态吸附方式,利用SBAR反应器分析好氧颗粒污泥对有机物的去除情况。结果表明,好氧颗粒污泥存在初期吸附作用,最佳吸附时间为30~45 min,COD去处率60%;通过对失活前后好氧颗粒污泥对有机物吸附性能测定以及红外光谱分析,探究好氧颗粒污泥对有机物的吸附类型,表明好氧颗粒污泥对有机物的吸附是一个包含生物吸附和化学吸附的复杂过程。