Influence of Carbon Sources on The Production and Characterization of The Exopolysaccharide (EPS) by Bacillus sphaericus 7055 Strain

In this study, EPS produced by five Bacillus spp. strains was determined. The only one strain (B. sphaericus 7055) was selected due to its high EPS production and it was investigated by growing this strain in LB broth medium containing various carbon sources. The highest EPS production of this strain was found in medium containing fructose. However, the effect of different concentrations of fructose and molasses on EPS production by the strain was studied. The maximum EPS yield of the strain 7055 was recorded with 2.5% (w/v) fructose, also the highest EPS production was found in 2.5% (w/v) molasses. The strain 7055 was found to contain (98.6%) galactose and (1.4%) glucuronic acid in control medium whereas the composition of the strain 7055 (2.5% (w/v) fructose) was found to be (99.9%) neutral sugar and (0.1%) Glucuronic acid while the strain 7055 (2.5% (w/v) molasses) was found to contain (65.9%), neutral sugars and (34.1%) glucuronic acid.     

A mathematical modeling of sulphur dioxide pollution in Erzurum City

A non-linear simple air-quality model was developed by applying the continuity equation for the air control volume over Erzurum city center and tested using daily average values of SO2 and meteorological data obtained during the winter seasons in Erzurum, Turkey from 1994 to 1998. Model parameters are estimated by non-linear regression analysis. Agreement between model predictions and measured data was found very satisfactory with standard deviations less than 20 microg/m3.     

Evaluating the seasonal changes of water quality of the Değirmendere and Galyan Rivers (Trabzon, Turkey)

The De?irmendere and Galyan (De?irmendere tributary) Rivers that discharge their water into the Black Sea are important watersheds in the northeastern part of Turkey. Water quality parameters were sampled from 1997 through 2001 for each year at five sites (three for Galyan, two for Degirmendere) along 29 and 42 km gradients, respectively covering all seasons. Surface water was collected from the sites and analyzed for temperature, total alkaline (MAAL), total dissolved solids (TDS), dissolved oxygen (DO), pH, conductivity (EC), nitrate (NO3), nitrite (NO2), total hardness (TH), phenolphthalein alkalinities (PAL) and organic matter (PV). Seasonal changes of water quality were analyzed statistically for both Rivers and evaluated according to the TS 266, EU and WHO standards. The analysis of variance results showed that Ca, Mg, MAL, NO3, pH, TDS and TH parameters of the De?irmendere River and Ca, DO, EC, MAL, NO3, pH and TH parameters of the Galyan River showed seasonal differences (p<0.05). The maximum values of the water pollution parameters for the two Rivers were below the threshold values throughout the study period. When both Rivers were compared, the mean values of the pollution parameters of the Degirmendere River were higher than those of the Galyan River and very close the limits. The results indicate that both Rivers can be used for the production of potable water during all seasons but only with an advanced treatment in the De?irmendere and a moderate treatment in the Galyan River, and for indirect and non-contact recreational activities.     

Application of magnetic separation to steelmaking slags for reclamation

Integrated iron and steel plants generate large amounts of metallurgical slag, which usually contains some quantity of metals or mixtures of oxides that could be treated to be recycled in various applications. The conventional method for disposal of slags is dumping. However, it is possible to process the slags to be used in the production of metallic iron, or as an additive in cement making. In this study, a basic oxygen furnace (BOF) steelwork slag obtained from the Kardemir integrated iron and steel works, Karabuk, Turkey is used. A drum magnetic separator system with pre-engineered crucial processing parameters of drum revolution speed, drum radius, drum flesh thickness, and magnitude of the magnetic field applied is utilized, as these parameters have a competing influence on the results. Subsequently, the effects of slag grain size and the drum-blade gap are investigated in the separation efficiency of magnetic grains. It is found that collection of magnetic grains is improved by decreasing the grain size of slags and moreover, the collection of magnetic grains fraction is increased with an increase in the gap between the blades and drum.     

Determination of roadside noise reduction effectiveness of Pinus sylvestris L. and Populus nigra L. in Erzurum, Turkey

This study was carried out to determine the noise-reduction effectiveness of the Pinus sylvestris L. and Populus nigra L. trees along the E-80 State highway in Erzurum-Turkey. Noise values were taken at three measurement points; open (without trees and taken as control), the urban forests of pure P. sylvestris L. and P. nigra L. areas, and at four different distances; 0 (near the noise source), 25, 50 and 75 m from the noise source. At the distance of 25 m from the source, the noise value was 78.5 dB(A) in the control area, which was reduced 75.5 dB(A) and 69.2 dB(A) in the P. nigra L. and P. sylvestris L. areas, with the reduction rates of 24.7 and 31% compared to the control, respectively. This value was 69.6, 67.1 and 64.3 at the distance of 50 m and 64.9, 62.5 and 59.2 at 75 m for the naked, P. nigra L. and P. sylvestris L. areas, respectively. From the results of the study, it was suggested that for the noise pollution from the traffic flow on the roads, in especially the big cities, noise reduction zones with suitable width and plant species should be formed along the main arteries of the cities.     

Determination of landscape beauties through visual quality assessment method: a case study for Kemaliye (Erzincan/Turkey)

Kemaliye (Erzincan/Turkey) is the member of European Association of Historic Towns and Regions. The aim of this study was to reveal the visual richness of the town; to identify the relationship between landscape spatial pattern and visual quality of the landscape and to offer some suggestions for the future planning in regarding to these visual beauties. The visual quality assessment method was used in this study. The results of the study revealed three landscape types that have the highest visual quality. Among those, the highest one is urban scenery 3 (US3; VQP = 5.9400), the second is geological structure scenery 5 (GSS 5; VQP = 5.9200) and the third natural scenery 3 (NS3; VQP = 5.9133). Visual quality assessment showed that urban pattern, geological structure and natural resources of the region also have visual value. The relationships between landscape spatial pattern and visual quality of landscape indicated that certain characteristics of landscape affected the quality. For instance, as the texture level decreased in natural landscapes and as the green areas increased in geological structure, visual preferences ratio increased. Some suggestions were also made regarding the visual resources use in the region.     

Effects of snow-reflected light levels on human visual comfort

The intensity of the sunlight reflected by the snow-covered surfaces is so high that it may disturb humans many times. This study aims to determine the reflected sunlight intensities from snow covered areas at points near (at a distance of 2 m) and under an individual tree and among trees (in the forest area) by accepting the open area as control; the reducing effects of the plant materials on reflected sunlight in percentage by comparing with the values of the open (control) area; and critical reflected sunlight threshold values for human visual comfort. The study was carried out over 22 clear and calm, i.e. sky was cloudless and wind was calm, days between the 1st and 31st days of January 2004, at 8:30 in the morning, at 12:30 at noon and at 14:30 in the afternoon in Erzurum. In order to determine the discomforting light intensity levels, 25 females and 26 male (totally 51) student subjects whose mean age was 20 and who had no visual disorders were selected. Considering the open area as control, mean reflected sunlight reducing effects were found to be 19.0, 66.0 and 82.7% for the 2 m near a tree, under a tree, and forest area, respectively. According to the responses of 51 subjects in the study, visually "very comfortable" range is between 5,000 and 8,000 lx; "comfortable" range is between 11,000 and 75,000 lx (mostly at 12,000 lx); "uncomfortable" condition is above the light intensity value of 43,000 lx and "very uncomfortable" condition is above the intensity of 80,000 lx. Great majority of the subjects (91%) found the value of 103,000 lx to be "very uncomfortable." As it is not an applicable way to use the great and dense tree masses in the cities, at least individual trees should be used along the main pedestrian axels in the cities having the same features with Erzurum to prevent the natural light pollution and discomforting effects of the snow-reflected sunlight.     

Deformation of slopes as a cause of underground mining activities: three case studies from Ostrava–Karviná coal field (Czech Republic)

Underground mining activities may potentially play a role on the initiation and reactivation of the slope movements. However, an adequate attention has not yet been paid to these problems; in this study, the possible influence of present and former mining activities on the selected set of model slope deformations in the Ostrava-Karviná Coalfield (Opliji, Repiste and Orlova Lazy District) was analysed and a methodology for their observation for application to similar conditions and influence was described. Isocatabase maps, terrain deformation parameters calculated for the point lying on the slope deformation surface, length measurement by zone extensometer and dilatometer measurement in cracks was also provided for evaluation of the underground mining impact. It was found that inclinations of both boreholes were evidence of underground mining impact, and localization of inclinometer measurement on boreholes in the active part as well as in the near vicinity was very important as an important result of this study. Analysis of underground mining activity influence on model localities in relation to performed mining operations, subsidence and other influences on the ground surface was also determined. Thus, the study will contribute to a more objective knowledge of these problems of interest for the professional public and also for the state administration to solve problems associated with the utilisation and settlement of such affected areas.     

Evaluation of trace element contents of some herbal plants and spices retailed in Kayseri,Turkey

The trace element contents of seven kinds of herbal plants and spice samples retailed in local markets in Kayseri-Turkey were determined by flame atomic absorption spectrometry after digestion with HNO₃/H₂O₂ mixture. The concentration ranges for the studied elements were found as 6.0–15.2, 0–32.2, 80.0–324.8, 8.1–386.3, and 13.1–36.2 μg/g for copper, nickel, iron, manganese, and zinc, respectively. The levels of cobalt, lead, and chromium ions in all the investigated samples were found to be below the detection limit of flame atomic absorption spectrometry. The results found in the present work were compared with values in the literature.     

Synthesis and characterization of antibacterial bio-nano films for food packaging

This study prepared antibacterial nanocomposite films for food packaging from Montmorillonite, which was modified by quaternary ammonium salts such as cetyltrimethylammonium bromide (CT), hexadecyl-tributyl phosphonium bromide (HD) and corn starch (CS). After this, it determined the antimicrobial activity of CS nanofilms against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) bacteria. Dispersion of silicate layers and starch nanocomposite films was analyzed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM), and the results indicated that presence of quaternary ammonium salts enhanced clay dispersion, and the starch films incorporated with quaternary ammonium salts would provide potential use in food packaging as nanostructural materials. The nanofilms that were obtained based on the results of the antibacterial analysis were confirmed to have much stronger antibacterial properties than those in similar studies in the literature.