微生物降解硝基芳香烃及其在环境保护中的应用

综述降解硝基芳烃的微生物类群,代谢途径,遗传操作及其在环境保护中的应用等方面的研究概况。     

大豆过敏原P34蛋白基因检测技术与环境污染的关系研究

环境污染易引起大豆种植区域出现过敏原P34蛋白基因变异情况,当前蛋白基因检测方法不能满足检测需求,提出基于探针引物的大豆过敏原P34蛋白基因荧光PCR定量检测技术,针对大豆过敏原特异性基因P34蛋白基因序列进行设计;通过DNA提取、浓度测定,荧光定量PCR检测,实现大豆过敏原P34蛋白基因检测。实验结果表明,所提方法能够准确检测出包括环境污染区域在内的大豆食品过敏原P34蛋白基因成分,具有很好的应用前景,满足市场监督检测的需要。     

气候和土地利用/覆被变化对宁波地区生态系统产水服务的影响

提供水资源是重要的生态系统服务功能之一,对区域经济和生态系统的可持续发展具有重要作用.近年来,人类活动对水资源的需求量增加,加之水环境污染和水资源浪费现象严重,造成了部分地区的缺水问题.在此背景下,本文以宁波地区为例,研究气候变化和土地利用/覆被变化对生态系统产水服务的影响.首先,利用InVEST模型中的产水量模块,估算了区域的产水量.然后,利用情景分析的方法设计6种情景,分析了气候变化和土地利用/覆被变化对区域产水量的影响.最后,量化了气候和土地利用/覆被变化这2种因素对生态系统产水服务的贡献程度,并讨论了形成机制.研究表明:①2000—2015年,宁波地区的降水量增加了6.44%,潜在蒸散量减少了8.35%.城镇化导致建设用地面积增加了120%,耕地面积减少了22.37%.在气候变化和土地利用/覆被变化的共同作用下,平均产水量增加了10.91%.②气候变化对生态系统产水服务的影响更为显著,而土地利用/覆被变化的影响较小.其中,2000—2015年气候变化对宁波地区产水量的贡献率高达97.56%,而土地利用/覆被变化的贡献率仅为2.44%.③城镇生态系统的产水量高于其他生态系统类型,农田生态系统的产水量高于森林和草地生态系统.因此,城镇化会增加产水量,退耕还林还草会导致产水量的减少.     

路面径流生态阻控技术研究——以改性麦饭石透水沥青路面为例

为强化透水沥青路面对路面径流中氮、磷的控制效果,采用铁盐联合碱热技术制备了涂层负载改性麦饭石蓄水层集料,并运用场发射扫描电子显微镜(SEM)、能谱分析仪(EDS)和X射线衍射(XRD)等手段对改性后麦饭石集料的表面形态、特征和化学成分进行了表征.同时,通过静态吸附试验对TP的吸附效果及其作用机理进行了对比研究.最后将改性麦饭石作为蓄水层集料应用于透水沥青路面中,通过模拟降雨和周期蓄水试验探究其净化机制.结果表明:相比于天然麦饭石,铁盐联合碱改性麦饭石的表面性状发生了明显变化,最大饱和吸附容量明显提高,对氨氮和磷酸盐的吸附容量分别从1.32 mg·g~(-1)和1.48 mg·g~(-1)提升到12.82 mg·g~(-1)和6.38 mg·g~(-1);降雨全过程中改性蓄水层路面对NH~+_4-N的整体去除效率可提高20%左右,对TP的净化效率至少可提高15%,蓄水阶段较模拟降雨阶段污染物的去除效果显著提高,改性后麦饭石蓄水层24 h后的出水水质均可达III类水标准,强化蓄水层和提高蓄水时间是提高路面径流净化效率的有效措施.因此,本实验中铁盐联合碱热技术制备的改性麦饭石可推荐用于海绵城市生态处理设施透水沥青路面中削减氨氮和总磷的污染负荷.     

湿地公园对局地气候舒适性影响的数值试验

为探索湿地公园对局地气候舒适性的影响,利用WRF数值模式,对重庆市梁平区待建湿地公园的位置与面积规划进行敏感性试验。结合当地主导风向和实际项目需求,设计了不建设湿地公园、湿地公园占地分别达10 km²、15 km²和20 km²等面积敏感性试验,以及湿地公园位于保护区西南部、东北部和分为南北两部分等建设位置敏感性试验。通过对比不同试验方案下垫面修改前后模拟结果的2 m气温、湿度等气象要素并计算热气候指标,认为湿地公园建设面积约15 km²、且将湿地分为两部分但东北部面积较大时,对当地的局地气候舒适性有较好改善。对风场的分析表明,这可能是因该规划方案能产生新的风道所致,因此也说明湿地公园的规划应当将局地风环境状况作为重要的参考指标。     

天津地区大气污染状况和气溶胶硫酸盐的研究

我们于1980—1981年对天津市大气污染物浓度做了同步监测,对天津市大气污染状况,二氧化硫转化为硫酸盐的过程及其对大气能见度的影响做了研究。以超C_i几率和的方法处理数据,研究结果表明,大气污染以早晨最严重,傍晚次之,中午较轻:冬季比夏季污染严重。各种污染物中以硫酸盐对大气能见度的影响最大,总颗粒物次之。当大气相对湿度大于70%时,对大气能见度的影响比较突出。颗粒物中的苯溶物对大气能见度有一定的影响。城市中相对湿度高时硫酸盐浓度大,可能是产生冬季烟雾事件的原因。下风方向的硫酸根浓度与二氧化硫浓度的比值和硫酸根含硫浓度与大气总硫浓度的比值均比上风方向相应的数值高,说明城市燃煤烟气是硫酸盐的来源。城市中硫酸根浓度与二氧化硫浓度的相关系数为0.77,硫酸根与颗粒物浓度的相关系数为0.95。在形成硫酸根的过程中二氧化硫浓度和颗粒物可能有贡献。以一维有源简化模式估算二氧化硫转化为硫酸根的速率常数,约为2.3±1.1%/hr,冬季约1.5%/hr。二氧化硫的迁移距离约为17—340km。     

聚合物/表面活性剂二元体系对油水界面性质的影响

文章应用界面张力仪、Zeta电位仪和表面黏弹性仪测定了聚合物、表面活性剂及其二元复合体系的质量浓度对油水界面性质的影响,并应用透射电镜观察了采出液的液膜结构。结果表明,随着聚合物质量浓度的增加,油水界面的界面剪切黏度值和界面张力值增大,颗粒表面Zeta电位的绝对值增大;随着表面活性剂质量浓度的增加,油水界面的界面剪切黏度变化幅度很小,但界面张力显著减小,颗粒表面Zeta电位绝对值增大;聚合物与表面活性剂复合能够形成稳定的聚合体,具有较大的界面剪切黏度值,较小的界面张力和较高的Zeta电位值;体系中聚合物、表面活性剂及水中悬浮物形成了类似"晶体"结构。     

Sulfur-containing amino acid methionine as the precursor of volatile organic sulfur compounds in algea-induced black bloom

After the application of methionine, a progressive and significant increase occurred in five volatile organic sulfur compounds (VOSCs): methanethiol (MeSH), dimethyl sulfide (DMS), dimethyl disulfide (DMDS), dimethyl trisulfide (DMTS) and dimethyl tetrasulfide (DMTeS). Even in the untreated control without a methionine addition, methionine and its catabolites (VOSCs, mainly DMDS) were found in considerable amounts that were high enough to account for the water’s offensive odor. However, blackening only occurred in two methionine-amended treatments. The VOSCs production was observed to precede black color development, and the reaching of a peak value for total VOSCs was often followed by water blackening. The presence of glucose stimulated the degradation of methionine while postponing the occurrence of the black color and inhibiting the production of VOSCs. In addition, DMDS was found to be the most abundant species produced after the addition of methionine alone, and DMTeS appeared to be the most important compound produced after the addition of methionine+glucose. These results suggest that methionine acted as an important precursor of the VOSCs in lakes suffering from algea-induced black bloom. The existence of glucose may change the transformation pathway of methionine into VOSCs to form larger molecular weight compounds, such as DMTS and DMTeS.     

Pb(II) removal from water using Fe-coated bamboo charcoal with the assistance of microwaves

Bamboo charcoal(BC) was used as starting material to prepare iron-modified bamboo charcoal(Fe-MBC) by its impregnation in FeCl 3 and HNO 3 solutions simultaneously,followed by microwave heating.The material can be used as an adsorbent for Pb(Ⅱ) contaminants removal in water.The composites were prepared with Fe molar concentration of 0.5,1.0 and 2.0 mol/L and characterized by means of N 2 adsorption-desorption isotherms,X-ray diffraction spectroscopy(XRD),scanning electron microscopy coupled with energy dispersive X-ray spectrometry(SEM-EDS),Fourier transform infrared(FT-IR) and point of zero charge(pH pzc) measurements.Nitrogen adsorption analyses showed that the BET specific surface area and total pore volume increased with iron impregnation.The adsorbent with Fe molar concentration of 2 mol/L(2Fe-MBC) exhibited the highest surface area and produced the best pore structure.The Pb(Ⅱ) adsorption process of 2Fe-MBC and BC were evaluated in batch experiments and 2Fe-MBC showed an excellent adsorption capability for removal Pb(Ⅱ).The adsorption of Pb(Ⅱ) strongly depended on solution pH,with maximum values at pH 5.0.The ionic strength had a significant effect on the adsorption at pH < 6.0.The adsorption isotherms followed the Langmuir isotherm model well,and the maximum adsorption capacity for Pb(Ⅱ) was 200.38 mg/g for 2Fe-MBC.The adsorption processes were well fitted by a pseudo second-order kinetic model.Thermodynamic parameters showed that the adsorption of Pb(Ⅱ) onto Fe-MBC was feasible,spontaneous,and exothermic under the studied conditions,and the ion exchange mechanism played an significant role.These results have important implications for the design of low-cost and effective adsorbents in the removal of Pb(Ⅱ) from wastewater.