酸性水储罐安全性研究

为预防酸性水储罐气相空间闪爆事故的发生,取样分析了某炼厂酸性水罐气相空间组成,根据气相组成配制了3种混合可燃气体,利用5 L爆炸极限测试仪测定了混合可燃气体在不同氧含量条件下的爆炸极限,根据爆炸极限数据计算出3种混合可燃气体的极限氧含量。结果表明:随着体系中氧含量增加,爆炸上限明显升高,爆炸下限无明显变化;烃类物质含量高时,混合可燃气体的爆炸上下限均降低,爆炸极限宽度变小;硫化氢和氢气含量高时,混合可燃气体爆炸上下限均升高,爆炸极限宽度变大;3种气相组成的极限氧含量分别为:8.1%、9.9%和10.3%,为防止罐顶气相组成发生闪爆,建议氧含量浓度控制在4%以内,当氧含量浓度到达5%时建议启动氮气联锁进行惰化和稀释。     

地表参数对面源大气预测结果的影响性分析研究

为了研究地表参数取值对AERMOD中面源模拟预测浓度值的影响,文章通过改变粗糙度、反照率和波文比的取值来进行不同地表参数与预测结果的相关性分析,同时采用正交试验法来研究不同地表参数对预测结果的敏感性.相关性分析表明,不同地表参数和预测结果有着很高的相关性.敏感性分析表明,反照率数值变化对小时最大落地浓度的敏感性最大,粗糙度数值变化对日均和年均最大落地浓度的敏感性最大.通过研究可以看出在面源大气预测过程中合理选择地表参数值是准确预测的前提.     

电子供体对地下水中高氯酸盐生物去除的影响研究

通过静态实验,考察了电子供体类型及用量对厌氧条件下微生物去除地下水中高氯酸盐的影响.结果表明,电子供体醋酸盐和H₂的加入,可以明显提高ClO₄^-的去除率,驯化后的微生物去除ClO₄^-的速率比未加入电子供体时提高约1.4~3倍.Monod动态模型能很好地拟合两种电子供体环境下ClO₄^-的微生物去除过程,分别以醋酸盐和H₂作为电子供体时,基质半饱和常数K_s为12.6 mg·L^-1和2.2 mg·L^-1,最大比基质消耗速率V_m为0.45 d^-1和0.08 d^-1.动力学参数表明,本实验条件下,异养型混合菌去除ClO₄^-的效果明显优于自养型混合菌;在少数受高浓度ClO₄^-污染的地下水环境中,为了提高ClO₄^-的去除速率只有通过增加菌体浓度或提高微生物酶的活性来实现.随着电子供体醋酸盐用量增加,ClO₄^-的(比)消耗速率逐渐增大.当初始CH₃COO^-与ClO₄^-的比例为3.80 mg(COD)/mg(ClO₄^-)时,比消耗速率v最大(0.27 d^-1).     

Adsorption of lead on multi-walled carbon nanotubes with different outer diameters and oxygen contents: Kinetics, isotherms and thermodynamics

The effects of different outer diameters and surface oxygen contents on the adsorption of heavy metals onto six types of multi-walled carbon nanotubes (MWCNTs) were investigated in an aqueous solution and lead was chosen as a model metal ion. The results indicated that the percentage removal and adsorption capacity of lead remarkably increased with decreasing outer diameter due to larger specific surface area (SSA). The SSA-normalized maximum adsorption capacity (qm /SSA) and SSA-normalized adsorption coefficient (Kd /SSA) were strongly positively correlated with surface oxygen content, implying that lead adsorption onto MWCNTs significantly increases with the rise of oxygen content and decreases with decreasing SSA. The calculated thermodynamic parameters indicated that adsorption of lead on MWCNTs was endothermic and spontaneous. When the oxygen content of MWCNTs increased from 2.0% to 5.9%, the standard free energy (△ G0 ) became more negative, which implied that the oxygenated functional groups increased the adsorption affinity of MWCNTs for lead. Through calculation of enthalpy (△ H0 ), G0 and free energy of adsorption (Ea ), lead adsorption onto MWCNTs was recognized as a chemisorption process. The chemical interaction between lead and the phenolic groups of MWCNTs could be one of the main adsorption mechanisms due to highly positive correlations between the phenolic groups and K d /SSA or q m /SSA.     

Pb(II) removal from water using Fe-coated bamboo charcoal with the assistance of microwaves

Bamboo charcoal(BC) was used as starting material to prepare iron-modified bamboo charcoal(Fe-MBC) by its impregnation in FeCl 3 and HNO 3 solutions simultaneously,followed by microwave heating.The material can be used as an adsorbent for Pb(Ⅱ) contaminants removal in water.The composites were prepared with Fe molar concentration of 0.5,1.0 and 2.0 mol/L and characterized by means of N 2 adsorption-desorption isotherms,X-ray diffraction spectroscopy(XRD),scanning electron microscopy coupled with energy dispersive X-ray spectrometry(SEM-EDS),Fourier transform infrared(FT-IR) and point of zero charge(pH pzc) measurements.Nitrogen adsorption analyses showed that the BET specific surface area and total pore volume increased with iron impregnation.The adsorbent with Fe molar concentration of 2 mol/L(2Fe-MBC) exhibited the highest surface area and produced the best pore structure.The Pb(Ⅱ) adsorption process of 2Fe-MBC and BC were evaluated in batch experiments and 2Fe-MBC showed an excellent adsorption capability for removal Pb(Ⅱ).The adsorption of Pb(Ⅱ) strongly depended on solution pH,with maximum values at pH 5.0.The ionic strength had a significant effect on the adsorption at pH < 6.0.The adsorption isotherms followed the Langmuir isotherm model well,and the maximum adsorption capacity for Pb(Ⅱ) was 200.38 mg/g for 2Fe-MBC.The adsorption processes were well fitted by a pseudo second-order kinetic model.Thermodynamic parameters showed that the adsorption of Pb(Ⅱ) onto Fe-MBC was feasible,spontaneous,and exothermic under the studied conditions,and the ion exchange mechanism played an significant role.These results have important implications for the design of low-cost and effective adsorbents in the removal of Pb(Ⅱ) from wastewater.     

过氧化氢与过硫酸钠去除有机污染物的进展

原位化学氧化在去除一些难以生物降解的污染物(如三氯乙烯)方面有着简单、快捷、彻底的优点,文章综述了2种环境友好的氧化剂过氧化氢和过硫酸钠在修复地下水污染的进展。主要从2方面进行文献的追溯跟踪,总结归纳:一方面是过氧化氢和过硫酸钠催化活化产生自由基的机理;另一方面是影响这2种氧化剂去除地下水氯代烃等有机污染的主要因素。最后提出了这2种氧化剂联合氧化的机理研究及应用上存在的问题和展望,为今后的研究工作提供了切入点和参考。     

环境风险评价综述及案例讨论

环境风险评价是目前我国环境保护工作发展的必然结果,是进行环境管理的重要依据。文章对环境风险评价的概念及分类、国内外研究进展、程序内容及技术方法进行了综述。文章根据《建设项目环境风险评价技术导则》要求,结合湖北某制药建设项目,从风险识别、风险预测及评价、风险事故防范措施等方面论述了项目环境风险评价的基本概念及一般程序。分析了目前环境风险评价存在的问题,并据此初步提出今后环境风险评价的发展方向和建议。     

我国生活垃圾处理现状与对策

生活垃圾处理问题是环保问题中的重要组成部分,,但目前我国生活垃圾处理水平较低,已造成了严重的环境污染。本文通过对我国生活垃圾处理方式及发展趋势的分析,根据生活垃圾的特点及管理中存在的一些问题,提出了我国生活垃圾处理的发展趋势及相应的管理对策。     

化工业清洁生产技术措施分析

化工业是导致环境污染的主要产业.当前,我国的化工产业所采用的生产方式仍然是传统的粗放式生产,给我国的生态环境带来了很大的压力.在这种情况下,除了转变生产方式之外,最有效的方法就是采用清洁生产技术.文章通过在化工业生产中使用清洁原料、使用清洁化学反应、使用清洁反应介质、使用清洁水处理技术等多个方面,对化工业清洁生产技术进行了系统性的分析,为广大化工业研究、生产人员提供了参考.     

适应性环境管理模式在大型赛事筹备中的应用（上）——管理模式构建

针对我国环境保护行政管理存在的直线式管理、缺乏弹性等问题,将适应性管理的理论和方法引入环境管理领域,提出适应性环境管理的概念和管理模式,通过构建基于AHP（层次分析法）的适应性环境管理绩效评估体系,在环境管理中对各项任务进行跟踪管理和绩效评估,反馈于阶段性目标的制定,从而灵活调整工作方案,最大限度地降低环境管理中的不确定性,保证环境管理总目标的达成.