Development of the Metropolitan Water Availability Index (MWAI) and short-term assessment with multi-scale remote sensing technologies

Global climate change will influence environmental conditions including temperature, surface radiation, soil moisture, and sea level, and it will also significantly impact regional-scale hydrologic processes such as evapotranspiration (ET), precipitation, runoff, and snowmelt. The quantity and quality of water available for drinking and other domestic usage is also likely to be affected by changes in these processes. Consequently, it is necessary to assess and reflect upon the challenges ahead for water infrastructure and the general public in metropolitan regions. One approach to the problem is to use index-based assessment, forecasting and planning. The drought indices previously developed were not developed for domestic water supplies, and thus are insufficient for the purpose of such an assessment. This paper aims to propose and develop a “Metropolitan Water Availability Index (MWAI)” to assess the status of both the quantity and quality of available potable water sources diverted from the hydrologic cycle in a metropolitan region. In this approach, the accessible water may be expressed as volume per month or week (i.e., m³/month or m³/week) relative to a prescribed historical record, and such a trend analysis may result in final MWAI values ranging from ?1 to +1 for regional water management decision making. The MWAI computation uses data and information from both historical point measurements and spatial remote-sensing based monitoring. Variables such as precipitation, river discharge, and water quality changes at drinking water plant intakes at specific locations are past “point” measurements in MWAI calculations. On the other hand, remote sensing provides information on both spatial and temporal distributions of key variables. Examples of remote-sensing images and sensor network technologies are in-situ sensor networks, ground-based radar, air-borne aircraft, and even space-borne satellites. A case study in Tampa Bay, Florida is described to demonstrate the short-term assessment of the MWAI concept at a practical level. It is anticipated that such a forecasting methodology may be extended for middle-term and long-term water supply assessment.     

Assessing China’s Ecological Restoration Programs: What’s Been Done and What Remains to Be Done?

This article surveys the recent literature that has assessed China’s ecological restoration programs, including the Sloping Land Conversion Program (SLCP) and the Natural Forest Protection Program (NFPP). Our presumption is that the performance of these programs should be determined by their effectiveness of implementation and significance of impact. Implementation effectiveness can be measured with such indicators as land area converted or conserved, and survival and stocking rates of restored vegetation, while impact significance can be gauged by the induced changes in ecosystem functionality and stability (erosion control, biodiversity protection, etc.) and socioeconomic conditions. Coupling this matrix with an exhaustive search of the publications, we find that: (1) the implementation effectiveness has not been examined as extensively as the impact significance; (2) efforts to assess the impact significance have concentrated on the SLCP, particularly its socioeconomic effects: growth of income, alternative industry, and employment, and likelihood of re-conversion; and (3) most of the socioeconomic studies are based on rural household surveys and discrete choice and difference in differences models. While much has been learned from previous studies, a lot more needs to be done in improving our understanding of the program execution and impacts. Future work should pay more attention to the NFPP and other programs, and the environmental impacts and the implementation effectiveness of all of them. To these ends, analysts must gather more field data regarding the evolving ecosystem conditions and socioeconomic information of higher aggregation, and conduct their research across scales and disciplines, with better application of geospatial technology and more effective modeling.     

Molecular composition of recycled organic wastes,as determined by solid-state 13C NMR and elemental analyses

Using solid state ¹³C NMR data and elemental composition in a molecular mixing model, we estimated the molecular components of the organic matter in 16 recycled organic (RO) wastes representative of the major materials generated in the Sydney basin area. Close correspondence was found between the measured NMR signal intensities and those predicted by the model for all RO wastes except for poultry manure char. Molecular nature of the organic matter differed widely between the RO wastes. As a proportion of organic C, carbohydrate C ranged from 0.07 to 0.63, protein C from <0.01 to 0.66, lignin C from <0.01 to 0.31, aliphatic C from 0.09 to 0.73, carbonyl C from 0.02 to 0.23, and char C from 0 to 0.45. This method is considered preferable to techniques involving imprecise extraction methods for RO wastes. Molecular composition data has great potential as a predictor of RO waste soil carbon and nutrient outcomes.     

Innovative process routes for a high-quality concrete recycling

This study presents alternative methods for the processing of concrete waste. The mechanical stresses needed for the embrittlement of the mortar matrix and further selective crushing of concrete were generated by either electric impulses or microwaves heating. Tests were carried out on lab-made concrete samples representative of concrete waste from concrete mixer trucks and on concrete waste collected on a French demolition site. The results obtained so far show that both techniques can be used to weaken concrete samples and to enhance aggregate selective liberation (that is the production of cement paste-free aggregates) during crushing and grinding. Electric pulses treatment seems to appear more efficient, more robust and less energy consuming (1–3 kW h t^?1) than microwave treatment (10–40 kW h t^?1) but it can only be applied on samples in water leading to a major drawback for recycling aggregates or cement paste in the cement production process.     

Adsorption of Ammonium by Graphene Oxide-Based Composites Prepared by UV Irradiation and Using as Slow-Release Fertilizer

A novel sodium alginate-grafted poly(acrylic acid)/graphene oxide (NaAlg-g-PAA/GO) composite hydrogel was prepared via ultraviolet irradiation, and characterized by infrared spectroscopy spectrometer. X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy. It was employed to adsorb NH₄⁺ from aqueous solution and used as slow-release nitrogen fertilizers (SNFs). Result indicated that the adsorption process for NH₄⁺ reached equilibrium within 50 min, with the adsorption capacity of 6.6 mmol g^?1 even if 30 wt% GO was incorporated. The results of adsorption kinetic and isotherm were well described by the pseudo-second-order and Freundlich model. The thermodynamics analysis showed the adsorption process was spontaneous. The study indicated excellent water-holding ratio of soil with 2 wt% SNFs was 81.2%, and nitrogen release was up to 55.1% within 40 days in soil. Overall, NaAlg-g-PAA/GO could be considered as an efficient adsorbent for the recovery of nitrogen with the agronomic reuse as a fertilizer.     

Trace-metal detoxification in the ventral caeca of Orchestia gammarellus (Crustacea: Amphipoda)

The talitrid amphipod crustacean Orchestia gammarellus (Pallas) was collected from metal-contaminated (Dulas Bay, Gironde) and control (Millport) sites in the UK and France. Irrespective of site of origin, the amphipods showed the same physiological mechanism of trace-metal detoxification, involving the ventral caeca. Copper was always present in lysosomal residual bodies in the ventral caeca. Following laboratory exposure to zinc and cadmium, the lysosomes usually contained both copper and zinc but cadmium was not detectable. The lysosomal copper concentration is positively correlated to that of sulphur, while the concentration of lysosomal zinc is related to that of phosphorus. Results are interpreted in terms of the differential rates of turnover of metallothioneins chelating copper, zinc or cadmium. Received: 9 February 1999 / Accepted: 2 December 1999     

Pyrolysis technologies for municipal solid waste: A review

Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO₂ and NH₃, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.     

Food decay and offensive odorants: A comparative analysis among three types of food

In this study, a list of offensive odorants including reduced sulfur, carbonyls, nitrogenous, and volatile organic compounds was measured by the indirect (instrumental) method during the decay processes of three food types (snipe egg, mackerel, and squid). The strengths of the odor release were also quantified in terms of dilution-to-threshold (D/T) ratio based on the air dilution sensory test. To collect odor samples for each food type, decaying experiments were conducted in 100 mL throwaway syringes for 1 month. The results showed that ammonia had the largest mean ranging from 385 ppm (fish) to 554 ppm (egg). However, most odorants generally fell in the range of 0.01–10 ppm, regardless of food type. The odor strengths measured with the suprathreshold method in terms of average D/T values increased on the order of 33,520 (egg), 202,330 (fish), and 766,330 (squid). These results were highly comparable to the patterns of odor indices derived by empirical conversion of odorant concentration data. The overall results of this study thus suggest that a unique pattern of odor release develops among different odorants as well as food type.     

The general utilization of scrapped PC board

The traditional burning process is used to recover copper from scrapped PC board (printed circuit board) but it causes serious environmental problems. In this research a new process was developed which not only prevents pollution problems, but also maximizes the utility of all the materials on the waste board. First, the scrapped PC board was crushed and grounded, then placed in the NH₃/NH₅CO₃ solution with aeration in order to dissolve copper. After distilling the copper NH₃/NH₅CO₃ solution and then heating the distilled residue of copper carbonate, pure copper oxide was obtained with particle size of about 0.2 μm and the shape elliptical. The remaining solid residue after copper removal was then leached with 6 N hydrochloric acid to remove tin and lead. The last residue was used as a filler in PVC plastics. The PVC plastics with PC board powder as filling material was found to have the same tensile strength as unfilled plastics, but had higher elastic modulus, higher abrasion resistance, and was cheaper.