Aerobic granules cultivated and operated in continuous-flow bioreactor under particle-size selective pressure

A novel method based on the selective pressure of particle size （particle-size cultivation method, PSCM） was developed for the cultivation and operation of aerobic granular sludge in a continuous-flow reactor, and compared with the conventional method based on the selective pressure of settling velocity （settling-velocity cultivation method, SVCM）. Results indicated that aerobic granules could be cultivated in continuous operation mode by this developed method within 14 days. Although in the granulation process, under particle-size selective pressure, mixed liquor suspended solids （MLSS） in the reactor fluctuated greatly and filamentous bacteria dominated the sludge system during the initial operation days, no obvious difference in profile was found between the aerobic granules cultivated by PSCM and SVCM. Moreover, aerobic granules cultivated by PSCM presented larger diameter, lower water content and higher specific rates of nitrification, denitrifieation and phosphorus removal, but lower settling velocity. Under long term operation of more than 30 days, aerobic granules in the continuous-flow reactor could remain stable and obtain good chemical oxygen demand （COD）, NH4^＋-N, total nitrogen （TN） and total phosphorus （TP） removal. The results indicate that PSCM was dependent on the cultivation and maintenance of the stability of aerobic granules in continuous-flow bioreactors.     

南京市氮氧化物排放行业分布特征及减排对策

采用污染源普查资料与实地调查相结合的方法,对南京市各行业氮氧化物(NOx)排放源及排放量进行调查和梳理。结果表明:各行业NO x排放分担率依次为电力41%、机动车25%、钢铁10%、水泥9%、石化7%、其它工业5%、居民生活3%。针对南京市现状,对重点排放源提出了NO x减排措施与对策。     

国内首个MW级分布式能源系统烟囱合理性分析

介绍了分布式能源系统的构成、运行特点及技术发展情况,研究了国内首个MW级分布式供能系统工程的烟囱高度和形式,预测和分析了项目大气污染物对环境的影响,证明了该项目烟囱选择的合理性,为下阶段国内分布式能源系统烟囱选型奠定技术基础。     

危险废物规范化管理措施研究

危险废物对人类和环境能产生极大的危害,具有"废物"和"资源"的双重属性。危险废物环境管理是从其产生、收集、贮存、转移、处置利用的全过程管理。文章阐述了危险废物的管理现状和特点,结合当前危险废物规范化管理面临的严峻形势,从完善法律法规体系、摸清危险废物底数、提升企业危险废物管理水平、推进危险废物处置项目建设、加强监管能力建设、加强宣传培训等方面提出了一些行之有效的合理化建议、对策,以更好地促进危险废物的管理工作。     

Biological conversion pathways of sulfate reduction ammonium oxidation in anammox consortia

• The SRAO phenomena tended to occur only under certain conditions. • High amount of biomass and non-anaerobic condition is requirement for SRAO. • Anammox bacteria cannot oxidize ammonium with sulfate as electron acceptor. • AOB and AnAOB are mainly responsible for ammonium conversion. • Heterotrophic sulfate reduction mainly contributed to sulfate conversion. For over two decades, sulfate reduction with ammonium oxidation (SRAO) had been reported from laboratory experiments. SRAO was considered an autotrophic process mediated by anammox bacteria, in which ammonium as electron donor was oxidized by the electron acceptor sulfate. This process had been attributed to observed transformations of nitrogenous and sulfurous compounds in natural environments. Results obtained differed largely for the conversion mole ratios (ammonium/sulfate), and even the intermediate and final products of sulfate reduction. Thus, the hypothesis of biological conversion pathways of ammonium and sulfate in anammox consortia is implausible. In this study, continuous reactor experiments (with working volume of 3.8L) and batch tests were conducted under normal anaerobic (0.2≤DO<0.5 mg/L) / strict anaerobic (DO<0.2 mg/L) conditions with different biomass proportions to verify the SRAO phenomena and identify possible pathways behind substrate conversion. Key findings were that SRAO occurred only in cases of high amounts of inoculant biomass under normal anaerobic condition, while absent under strict anaerobic conditions for same anammox consortia. Mass balance and stoichiometry were checked based on experimental results and the thermodynamics proposed by previous studies were critically discussed. Thus anammox bacteria do not possess the ability to oxidize ammonium with sulfate as electron acceptor and the assumed SRAO could, in fact, be a combination of aerobic ammonium oxidation, anammox and heterotrophic sulfate reduction processes.     

Experimental research on emission and removal of dioxins in flue gas from a co-combustion of MSW and coal incinerator

This paper describes the experimental study of dioxins removal from flue gas from a co-combustion municipal solid waste and coal incinerator by means of a fluidized absorption tower and a fabric filter. A test rig has been set up. The flow rate of flue gas of the test rig is 150-2000 m3/h. The system was composed of a humidification and cooling system, an absorption tower, a demister, a slurry make-up tank, a desilter, a fabric filter and a measurement system. The total height of the absorption tower was 6.5m, and the diameter of the reactor pool was 1.2 m. When the absorbent was 1% limestone slurry, the recirculation ratio was 3, the jet rate was 5-15 m/s and the submerged depth of the bubbling pipe under the slurry was 0.14 m, the removal efficiency for dioxins was 99.35%. The concentration of dioxins in the treated flue gas was 0.1573 x 10(-13)kg/Nm3 and the concentration of oxygen was 11%. This concentration is comparable to the emission standards of other developed countries.     

Association of exposure to multiple metals with papillary thyroid cancer risk in China

Papillary thyroid cancer (PTC) has inflicted huge threats to the health of mankind. Metal pollution could be a potential risk factor of PTC occurrence, but existing relevant epidemiological researches are limited. The current case-control study was designed to evaluate the relationships between exposure to multiple metals and the risk of PTC. A total of 262 histologically confirmed PTC cases were recruited. Age- and gender-matched controls were enrolled at the same time. Urine samples were used as biomarkers to reflect the levels of environmental exposure to 13 metals. Conditional logistic regression models were adopted to assess the potential association. Single-metal and multi-metal models were separately conducted to evaluate the impacts of single and co-exposure to 13 metals. The increased concentration of urinary Cd, Cu, Fe, and Pb quartiles was found significant correlated with PTC risk. We also found the decreased trends of urinary Se, Zn, and Mn quartiles with the ORs for PTC. These dose-response associations between Pb and PTC were observed in the single-metal model and remained significant in the multi-metal model (OR_25-50th=1.39, OR_50-75th=3.32, OR_>75th=7.62, p for trend <0.001). Our study suggested that PTC was positively associated with urinary levels of Cd, Cu, Fe, Pb, and inversely associated with Se, Zn, and Mn. Targeted public health policies should be made to improve the environment and the recognition of potential risk factors. These findings need additional studies to confirm in other population.

     

爆炸物冲击波的人体防护研究

针对爆炸物爆炸冲击波、破片或子弹冲击、高温高压气体热辐射等复杂环境下的人体伤害威胁,本文从人员损伤研究和防护材料研究两方面综述了国内外研究进展,最后为开展人体有效防护研究工作提出了几点建议.     

盾构隧道施工对邻近建筑物差异沉降与扭曲变形影响分析∗

针对盾构隧道施工侧穿既有建筑物问题,结合南京地铁一号线北延段工程,以盾构隧道侧穿某浅基础建筑物为研究对象,通过对建筑物沉降实测数据进行分析,并利用Plaxis 3D 软件建立数值模型,研究了隧道距建筑物不同水平距离和盾构以不同角度穿越对建筑物差异沉降与扭曲变形特征的影响。结果表明：随着盾构开挖面逐渐接近建筑物,建筑物差异沉降及扭曲变形逐渐增大;差异沉降量在盾构机通过时达到最大值,之后趋于稳定,而扭曲变形峰值出现在盾构开挖面到达建筑物中点截面位置时,随后逐渐减小;当建筑物中心至隧道轴线的水平距离与隧道外径之比L/D=0.5~2 时,建筑物差异沉降量较大,在L/D=1.5 时达到峰值;当盾构穿越夹角从θ=0°增大至θ=90°时,建筑物最大差异沉降量不断增加,而最终扭曲变形值则先增大后减小,在θ=45°时扭曲变形达到峰值。研究结果可为盾构隧道侧穿浅基础建筑物时相关类似工程提供参考。