杭州黑碳气溶胶污染特性及来源研究

2011年7月~2012年6月对黑碳气溶胶(BC)、PM2.5、污染气体及气象因子进行同步观测,以评估杭州市BC污染特征、来源分布及对大气能见度的影响.结果表明:杭州市大气BC日均浓度范围为1.3~16.5μg/m3,年均值达到(5.1±2.5)μg/m3.BC呈明显的季节变化趋势,秋冬季高,夏季低.BC也呈典型的日变化趋势,交通高峰期高,下午低,同时与NOx呈较好的相关性,表明城市中BC受到机动车尾气排放的重要影响;而BC/CO低于其他城市则表明生物质燃烧排放可能是杭州BC的另一大重要来源.BC随风速下降呈上升趋势, BC超过10μg/m3的高浓度事件中,风速基本低于2m/s,北-西北-西风对高浓度BC的输送作用明显.观测期间BC的吸收系数为(44.8±23.0)Mm-1,占到总消光比例的10.4%.灰霾和重度灰霾天气下,吸收系数分别为(66.2±30.1),(100.2±49.2)Mm-1,达到非霾天气的2.2和3.4倍, 表明BC吸收消光作用是影响杭州市大气能见度下降和灰霾天气发生的重要因素之一.     

土著微生物修复铬(Ⅵ)污染土壤的条件实验研究

根据铬(Ⅵ)污染土壤中筛选出的土著微生物初步解毒实验结果,将土著菌种制成六价铬还原菌剂,通过时间、温度、菌量、pH值、有机质用量等单因素条件实验,发现温度和有机质含量对六价铬还原影响显著,在上述各项较佳条件下施用该菌剂1个月后,对于浸出液六价铬浓度范围从10-55mg/L的污染土壤,六价铬的还原效果都可达到90%以上,高于化学法,这说明该菌剂可有效应用于六价铬土壤的生物修复。     

塔体倾斜条件下船舶尾气SO2洗涤脱除强化

针对恶劣海况下船舶洗涤塔倾斜的情况,利用船舶尾气净化小试试验台,开展了洗涤塔不同倾斜角度下对镁基吸收剂脱硫效率影响的实验,研究了液气比、入口SO₂浓度、烟气量、浆液pH值、对洗涤塔内SO₂脱除效率的影响.结果表明：脱硫效率随洗涤塔倾角度的增大而降低.脱硫效率随液气比的增大而升高,较低的液气比时倾斜角度对SO₂脱除效率的影响更明显;脱硫效率随SO₂入口浓度的增大而略微降低,入口SO₂浓度较高时,SO₂脱除效率的降低随倾斜角度的增加变化较为明显;相同液气比条件下,脱硫效率随塔内烟气量的增加而升高;脱硫效率随浆液pH值的增大而升高,低pH值时SO₂脱除效率的降低随倾斜角度的增加变化较为明显.筛板-边壁环的加入可有效提高倾斜条件下洗涤塔的脱硫效率,倾斜角度为15°时,脱硫效率提高将约3%;倾斜角度为10°时,脱硫效率提高约5%;倾斜角度在5°以下时,脱硫效率可提高将近7%.     

超低排放燃煤电厂中湿式电除尘器对可凝结颗粒物排放特性的影响

为了解不同负荷下超低排放燃煤电厂中湿式电除尘器（WESP）对可凝结颗粒物（CPM）排放特性的影响,基于US EPA Method 202搭建了CPM采样装置,分析了某安装有WESP的超低排放燃煤电厂烟气中CPM的排放水平,评估了机组负荷对CPM排放浓度的影响以及WESP对CPM中各组分的脱除效率．结果表明,在75%负荷和100%负荷条件下,超低排放电厂CPM的排放量分别为27.27 mg·m^-3和28.71 mg·m^-3,WESP对CPM的脱除效率分别为35.59%和27.59%.SO₄^2-是CPM中水溶性离子的主要成分,在不同负荷条件下SO₄^2-在CPM中无机组分的质量分数达到了65%以上;WESP对于CPM中Cl^-、K⁺、Ca²⁺、Mg²⁺和Na⁺等无机离子的脱除效率可以达到30%～50%,但会使CPM中SO₄^2...     

硫代硫酸钠溶液修复重金属污染土壤的两种回收技术对比

研究了Na2S2O3溶液对污染土壤中Cu,Cd和Pb的去除能力,以及Na2S2O3萃取这三种金属分离技术的对比.结果表明,Na2S2O3溶液能有效地从土壤中萃取这三种金属,其萃取效率依次为:Cu>Cd>Pb.Na2S 沉淀分离法和阳离子交换树脂交换法均能分离出Na2S2O3萃取液中的Cu和Cd,去除率均达99%.但用Na2S2O3溶液萃取碱性土壤中的重金属时,阳离子交换树脂交换法分离重金属的效果较好,萃取酸性土壤中的重金属则用Na2S 沉淀分离法效果较好.     

填充柱(FID)-顶空气相色谱法测定水和废水中丙烯腈

本文用顶空气相色谱法测定水和废水中丙烯腈,具有简便、快速、灵敏、准确,干扰少,适用性强等优点,适用于不同类型的环境水样分析。     

对环境监测工作定位的探讨

随着我国环境法制的不断完善,对环境监测工作提出更高的要求,给环境监测工作明确“定位”是迫切需要解决的问题。根据法学原理,从环境监测的基本方针、主要任务、在诉讼中的作用以及技术鉴定对环境监测的要求及法律责任等方面进行探讨,阐述环境监测应定位于“技术鉴定”及环境监测工作在环境执法中的重要地位。     

城市污水集中处理市场化模式研究

实行城市污水集中处理的市场化是社会主义市场经济与水环境保护的客观要求。在城市污水集中处理市场化的进程中，建立怎样的投资，收费与运营模式是摆在我们面前的一个新课题。笔者在考察日本，法国，美国等国的成功经验的基础上，结合我国国情对此作了较为深入的探讨。     

Transboundary hazardous waste management. Part I: Waste management policy of importing countries.

Mixed metal-containing waste, polychlorinated biphenyls (PCB) containing capacitors, printed circuit boards, steel mill dust and metal sludge were among the most common wastes exported from Taiwan. Before the implementation of the self-monitoring model programme of the Basel Convention (secretariat of the Basel Convention 2001) in the Asia region, Taiwan conducted a comprehensive 4-year follow-up project involving government authorities and the waste disposal facilities of the importing countries. A total of five countries and nine plants were visited in 2001-2002. The following outcomes can be drawn from these investigations. The Chinese government adopts the strategies of 'on-site processing' and 'relative centralization' on the waste management by tightening permitting and increasing site inspection. A three-level reviewing system is adopted for the import application. The United States have not signed the Basel Convention yet; the procedures of hazardous waste import rely on bilateral agreements. Importers are not required to provide official notification from the waste exporting countries. The operation, administration, monitoring and licensing of waste treatment plants are governed by the state environmental bureau. Finland, France and Belgium are members of the European Union. The procedures and policies of waste import are similar. All of the documents associated with transboundary movement require the approval of each government involved. Practically, the notification forms and tracking forms effectively manage the waste movement.     

Investigation of contact vacuuming for remediation of fungally contaminated duct materials

Environmental fungi become a potential Indoor Air Quality (IAQ) problem when adequate moisture and nutrients are present in building materials. Because of their potential to rapidly spread contamination throughout a building, ventilation system materials are of particular significance as potential microbial contamination sources. Current recommendations are to discard fibrous glass insulation that appears to be wet or moldy. Unfortunately, this advice is not always followed. Instead, cleaning is sometimes being used in buildings to remediate fibrous glass duct liner that is already contaminated with microbial growth. The objectives of this research program were to: 1) determine, under dynamic test conditions, whether fungal spore levels on heating, ventilating, and air-conditioning (HVAC) duct material surfaces could be substantially reduced by thorough vacuum cleaning, 2) evaluate whether subsequent fungal growth could be limited or contained by mechanical cleaning, and 3) provide data concerning the advisability of cleaning duct materials. The constant high relative humidity (RH) environment to which the test materials were exposed during this study was selected as a favorable growth environment that is frequently found in Southeastern United States HVAC systems. The results showed that, following cleaning, the levels of the two test fungi, A. versicolor and P. chrysogenum, recovered to preclean levels within 6 weeks. Therefore, mechanical cleaning by contact vacuuming alone was able to only temporarily reduce the surface fungal load. The current guidelines to discard contaminated materials should be followed.