Recovery of Ni(II) from real electroplating wastewater using fixed-bed resin adsorption and subsequent electrodeposition

Resin adsorption and subsequent electrodeposition were used for nickel recovery. Treated wastewater can meet the Electroplating Pollutant Discharge Standard. The spent resin is completely regenerated by 3 BV of 4% HCl solution. 95.6% of nickel in concentrated eluent was recovered by electrodeposition. Effective recovery of high-value heavy metals from electroplating wastewater is of great significance, but recovering nickel ions from real electroplating wastewater as nickel sheet has not been reported. In this study, the pilot-scale fixed-bed resin adsorption was conducted to recover Ni(II) ions from real nickel plating wastewater, and then the concentrated Ni(II) ions in the regenerated solution were reduced to nickel sheet via electrodeposition. A commercial cation-exchange resin was selected and the optimal resin adsorption and regeneration conditions were investigated. The resin exhibited an adsorption capacity of 63 mg/g for Ni(II) ions, and the average amount of treated water was 84.6 bed volumes (BV) in the pilot-scale experiments. After the adsorption by two ion-exchange resin columns in series and one chelating resin column, the concentrations of Ni(II) in the treated wastewater were below 0.1 mg/L. After the regeneration of the spent resin using 3 BV of 4% (w/w) HCl solution, 1.5 BV of concentrated neutral nickel solution (>30 g/L) was obtained and used in the subsequent electrodeposition process. Using the aeration method, alkali and water required in resin activation process were greatly reduced to 2 BV and 3 BV, respectively. Under the optimal electrodeposition conditions, 95.6% of Ni(II) in desorption eluent could be recovered as the elemental nickel on the cathode. The total treatment cost for the resin adsorption and regeneration as well as the electrodeposition was calculated.     

Aerosol optical properties under different pollution levels in the Pearl River Delta (PRD) region of China

To clarify the aerosol hygroscopic growth and optical properties of the Pearl River Delta(PRD)region,integrated observations were conducted in Heshan City of Guangdong Province from October 19 to November 17,2014.The concentrations and chemical compositions of PM_2.5,aerosol optical properties and meteorological parameters were measured.The mean value of PM_2.5 increased from less than 35(excellent) to 35-75 μg/m³(good) and then to greater than 75 μg/m³(...     

几种医疗垃圾处理技术综述

医疗废物是一类危害极大的特殊废物。自20世纪50年代起,医疗废物的处理已引起世界各国的广泛重视。目前,国内外学者对医疗废物处理技术的研究日益丰富,已经取得了一定的研究成果。在此基础上,通过综合比较焚烧处理、高压蒸汽灭菌处理、化学处理、微波处理、热解处理等几种医疗废物处理技术,综合评定了各种处理工艺的技术参数及优缺点,最后比较分析得出了高温热解法具有多方面的优点,是目前国内外首推的医疗废物处理技术。     

Aerobic degradation of bisphenol A by Achromobacter xylosoxidans strain B-16 isolated from compost leachate of municipal solid waste

A novel bacterium designated strain B-16 was isolated from the compost leachate of the municipal solid waste (MSW) in a laboratory reactor. This strain was identified as a gram-negative bacterium, Achromobacter xylosoxidans that could grow on bisphenol A (BPA, a representative endocrine disruptor) as a sole carbon source under aerobic condition. BPA-degrading characteristics of strain B-16 were investigated in liquid cultures. The results show that BPA degradation was influenced by several factors (e.g. inoculum size, substrate concentration, temperature and pH, etc). The half-lives, optimum temperature and pH were found to be 0.58-3.1d, 35 degrees C and 7.0, respectively. BPA-degrading activity and cell growth were inhibited at high substrate concentration. Metabolic intermediates detected during the degradation process were identified as p-hydroxybenzaldehyde, p-hydroxybenzoic acid and p-hydroquinone, respectively. Metabolic pathway of BPA degradation was proposed in this study.     

长三角空气质量区域预报准确性评估方法研究

根据长三角空气质量区域预报工作的实际需要,对分区文字预报和落区图预报两种方式分别制定了不同的空气质量指数级别预报准确性评估方法。分区文字预报根据设定的预报准确性判定方法计算预报评分,落区图预报按区域内预报准确城市占比进行准确率统计。分区文字预报结果显示,2017年长三角区域的预报准确天数占比为62. 2%,预报评分为70. 2,区域预报评估效果良好。落区图预报评估结果显示,预报级别偏差具有地域性差异,安徽北部、江苏北部和江西中北部预报等级偏高,长三角中南部沿海城市预报等级偏低。该套评估方法可为区域空气质量预报偏差成因分析提供依据,为区域预报工作的改进提供定量参考。     

不同区域气候条件影响下的纳帕海湿地植物叶绿素荧光特性

采用原位移地技术,研究了不同区域气候条件影响下,纳帕海4种常见湿地植物的株高、茎粗、生物量等生长特性,以及叶绿素a、叶绿素b、总叶绿素含量、叶绿素a/b值、光化学量子效率（Fv/Fm）、电子传递速率（ETR）、实际光化学量子效率（Phips2）、光化学猝灭系数（qP）、非光化学猝灭系数（NPQ）等生理生化指标,分析探讨了湿地植物对不同区域气候条件的响应差异和适应策略。研究发现气候条件的改变对湿地植物的生长、叶绿素含量及荧光参数产生重要影响。随着温度的上升,水葱Scirpus tabernaemontani和茭草两种广布种Zizania caduciflora均表现出良好的适应性,生物量、叶绿素含量、Fv/Fm、ETR、Phips2、qP值不同程度升高,生长状况良好。刘氏荸荠Heleocharis liouana也表现出较好的适应性,当气温上升到一定程度后,虽然Fv/Fm、ETR、Phips2、qP值降低,但其通过调节叶绿素含量、热耗散来减轻伤害,气候变化对其生长的影响较小。而北温带分布型的黑三棱Rhizoma scirpi yagarae对气候变化的适应性较差,当温度上升到一定程度后, Fv/Fm、ETR、Phips2、qP、NPQ都出现大幅下降,生长停滞,生物量下降,对温度上升极为敏感。可以推测,随着全球变暖,像黑三棱这样的物种,其生存将面临极大的威胁,而高原湿地生态功也将能受到损害。     

超声波联合PAM对污泥脱水性能的影响

以污泥脱水性能与沉降性能为指标,研究了超声波调理联合PAM对污泥脱水性能的影响。实验结果表明,单独使用超声波调理的最佳调理时间为20 s,此时污泥比阻为0.68×109s2/g;采用PAM对污泥进行调理时,在浓度为0.1%,投加量为100 mg/L时污泥比阻最小,为0.32×109s2/g;采用超声波与PAM联合调理时,利用正交试验得到最适合的组合条件为:调理时间20s、PAM投加量100 mg/L、浓度0.15%。     

多氯联苯管理体系探讨

多氯联苯属于《斯德哥尔摩公约》首批需要控制和消减的持久性有机污染物,在国内主要用于电力设备的绝缘油。中国的多氯联苯污染形态主要有含多氯联苯的设备以及受多氯联苯污染的土壤。针对中国目前存在的多氯联苯污染,分析了其特点,从法律、法规以及标准等方面介绍了多氯联苯污染控制的相关政策法规和管理现状,同发达国家多氯联苯污染管理体系进行比较,对中国多氯联苯污染管理不足提出相应的具体管理政策建议,主要包括管理方面持久性有机污染物技术规范方面和环境经济方面。     

新时期城市安全风险防控实践探析——以成都为例

随着我国加快从"乡村社会"迈向"城市社会",城市安全问题成为了新时期亟待解答的"国家命题",分析了城市化与城市风险相关问题,提出了适合成都的安全风险预防指标体系,并以"技术防控"开发建设城市安全监测预警系统,以"标准防控"推动企业和公共领域安全管理标准化,以"群众防控"依托安全社区为载体,构建基层社区公共安全体系,为我国城市安全风险防控体系建设提供了宝贵经验和有益启示。     

Hydrothermal liquefaction phase behavior of microalgae & model compounds in fused silica capillary reactor

A fused silica capillary reactor combined with a heating/cooling stage, a microscope and a digital camera were used to investigate phase behavior during the hydrothermal liquefaction of microalgae (Dunaliella tertiolecta) and model compounds, including soya protein and glycine, starch, glucose and xylose, stearic acid and palmitic acid. Bubbles were generated at 246°C and disappeared at 360°C upon heating when Dunaliella tertiolecta used as feedstocks. Moreover, liquid products were generated at 300°C upon heating and oily liquid products began to separate out at 250°C upon cooling. The phase behavior of soya protein was similar to that of the Dunaliella tertiolecta. Meanwhile, there only observed the bubbles generation during hydrothermal liquefaction of glycine. Heating the starch, glucose and xylose above 350°C generated black solids from carbonization. Stearic acid and palmitic acid only had the process of melting, dissolution, dispersion and precipitation.