Modeling and data assessment of longitudinal salinity in a low-gradient estuarine river

Continuous data of vertical-profile salinity were analyzed for four stations located successively upriver in a macrotidal estuary, the lower St. Johns River (Northeast Florida, USA). The data analysis confirmed well-mixed salinity conditions in the river with at most 1.3 ppt of vertical variability at Dames Point (river km 20), where the main variations of salinity are along the longitudinal axis of the river. Given the well-mixed salinity conditions and dominant horizontal structure of salinity variations in the river, we present and apply a barotropic, two-dimensional modeling approach for hydrodynamic-salinity transport simulation in the lower St. Johns River. When properly forced by offshore surge, high-resolution wind fields and freshwater river inflows, the model replicated the salinity measurements remarkably well, including the separation into tidal and sub-tidal components. The data and model results show that, at times, offshore winds and surge can be more influential on longitudinal salinity variations than local winds over the river. We demonstrate the importance of using proper boundary conditions to force the model relative to the minimal sensitivity of the model to parameter adjustment of horizontal mixing and uncertainty-based perturbation of wind and inflow forcings.     

Trends and applications of multi-criteria decision analysis in environmental sciences: literature review

Approximately 3000 papers concerning multi-criteria decision analysis (MCDA) in the environmental field were identified through a series of queries in the Web of Science database and classified by MCDA method and environmental application using text mining in R. Stemming and stop word removal techniques were used to remove irrelevant text from the literature. Trends in MCDA methods (AHP/ANP, TOPSIS, outranking, MAUT/MAVT) associated with specific environmental applications (water, air, energy, natural resources, and waste management) or interventions/tools applications (stakeholders, strategies, sustainability, and GIS) were identified. The results show a linear growth in the share of MCDA papers in environmental science across all application areas. Furthermore, the results show that AHP/ANP and MAUT/MAVT are the most frequently mentioned MCDA methods in the literature. For environmental applications, the results showed that natural resource and waste management keywords were, respectively, the most and least commonly discussed applications within the MCDA papers. For intervention/tool applications, we found that keywords associated with ‘strategy’ and ‘GIS’ applications are, respectively, the most and least commonly discussed keywords within the MCDA papers. The authors found that MCDA method keywords were evenly distributed across the environmental and intervention/tool applications, indicating a lack of preference in the environmental field for use of specific MCDA methods. This paper demonstrates that text mining is an applicable tool to assess specific textual trends and patterns when analyzing larger bodies of MCDA literature.     

A new approach for the modelling of chestnut wood photo-degradation monitored by different spectroscopic techniques

The aim of this work is to study the colour and chemical modifications of the surfaces in chestnut wood samples as a consequence of irradiating in a controlled environment. The changes were investigated by a new analytical approach by combining traditional techniques such as reflectance spectrophotometry in the visible range and Fourier transform infrared spectroscopy with new hyperspectral imaging, in order to obtain forecast models to describe the phenomenon. The statistical elaboration of the experimental data allowed to validate the measurements and to obtain models enabling to relate the investigated parameters; the elaboration of the hyperspectral images by chemometric methods allowed for studying the changes in the reflectance spectra. A result of great importance is the possibility to correlate the oxidation of wood chemical components with the colour change in a totally non-invasive modality. This result is particularly relevant in the field of cultural heritage and in general in the control processes of wooden materials.     

Seasonal variation of chemical composition and source apportionment of PM2.5 in Pune,India

Environmental Science and Pollution Research - Particulate matter with size less than or equal to 2.5 μm (PM2.5) samples were collected from an urban site Pune, India, during April...     

Analytic framework for assessing participation processes and outcomes of climate change adaptation tools

The assumptions and empirical evidence linking climate change adaptation to development cooperation have led to the emergence of a range of climate change adaptation tools aiming at improving the quality of development cooperation initiatives in times of global change. In order to assess the quality of these tools, we develop an analytic framework to critically assess the social learning and sustainable development outcomes of climate change adaptation tools. The analytic framework defines project objectives, participation typology, participation tools, participation stages, scenarios development, modelling exercises, stakeholder analysis and risk communication strategies that support quality participation outcomes.     

Perceptions matter: household adaptive capacity and capability in two Australian coastal communities

Regional Environmental Change - This paper presents empirical data on household perceptions of capability to adapt to climate hazards and associated capacity needs. Households play an important...     

Sustainable cooking energy options for rural poor people in India: an empirical study

Currently, energy consumption for cooking in rural households of India is mostly based on fuelwood used in traditional stoves. This paper presents results of a study carried out in a forest fringe area of India on cooking energy use. The concept of calculating levelized cost as cost per unit of useful energy is applied on source–device combinations of cooking and validated in Bargaon Community Development Block of Sundergarh District in Odisha, India. About 92 % of the households in the study area use fuelwood as the only energy source for cooking; the total use of fuelwood for only cooking, in the Block is nearly 1.8 times the total sustainable wood supply showing an urgent need for promoting alternative cooking energy options. This paper also presents an assessment of different cooking options in terms of cost per unit of useful cooking energy. LPG, biogas and gasifier stoves are found to be far too expensive for the local people. Briquette-fired improved stoves appear to be a promising cooking energy option in the study area. Government support and intervention are recommended for promoting this option.     

Overview of surface measurements and spatial characterization of submicrometer particulate matter during the DISCOVER-AQ 2013 campaign in Houston,TX

The sources of submicrometer particulate matter (PM₁) remain poorly characterized in the industrialized city of Houston, TX. A mobile sampling approach was used to characterize PM₁ composition and concentration across Houston based on high-time-resolution measurements of nonrefractory PM₁ and trace gases during the DISCOVER-AQ Texas 2013 campaign. Two pollution zones with marked differences in PM₁ levels, character, and dynamics were established based on cluster analysis of organic aerosol mass loadings sampled at 16 sites. The highest PM₁ mass concentrations (average 11.6 ± 5.7 µg/m³) were observed to the northwest of Houston (zone 1), dominated by secondary organic aerosol (SOA) mass likely driven by nighttime biogenic organonitrate formation. Zone 2, an industrial/urban area south/east of Houston, exhibited lower concentrations of PM₁ (average 4.4 ± 3.3 µg/m³), significant organic aerosol (OA) aging, and evidence of primary sulfate emissions. Diurnal patterns and backward-trajectory analyses enable the classification of airmass clusters characterized by distinct PM sources: biogenic SOA, photochemical aged SOA, and primary sulfate emissions from the Houston Ship Channel. Principal component analysis (PCA) indicates that secondary biogenic organonitrates primarily related with monoterpenes are predominant in zone 1 (accounting for 34% of the variability in the data set). The relevance of photochemical processes and industrial and traffic emission sources in zone 2 also is highlighted by PCA, which identifies three factors related with these processes/sources (~50% of the aerosol/trace gas concentration variability). PCA reveals a relatively minor contribution of isoprene to SOA formation in zone 1 and the absence of isoprene-derived aerosol in zone 2. The relevance of industrial amine emissions and the likely contribution of chloride-displaced sea salt aerosol to the observed variability in pollution levels in zone 2 also are captured by PCA.

Implications: This article describes an urban-scale mobile study to characterize spatial variations in submicrometer particulate matter (PM₁) in greater Houston. The data set indicates substantial spatial variations in PM₁ sources/chemistry and elucidates the importance of photochemistry and nighttime oxidant chemistry in producing secondary PM₁. These results emphasize the potential benefits of effective control strategies throughout the region, not only to reduce primary emissions of PM₁ from automobiles and industry but also to reduce the emissions of important secondary PM₁ precursors, including sulfur oxides, nitrogen oxides, ammonia, and volatile organic compounds. Such efforts also could aid in efforts to reduce mixing ratios of ozone.     

A study on the arsenic concentration in groundwater of a coastal aquifer in south-east India: an integrated approach

The occurrence of arsenic in drinking water and its detrimental effects have drawn much attention in recent years. Several studies have been conducted in the deltaic plains of River Ganga, NE part of the India, and in other countries, but no systematic study was conducted in South India on occurrence of arsenic in groundwater. The main aim of this study is to determine the level of arsenic in groundwater and to understand the relation with other geochemical parameters of groundwater in the south-eastern coastal aquifer at Kalpakkam region, India. This region is represented by three different lithologies, viz. charnockites, flood plain alluvium and marine alluvium. Twenty-nine representative samples of groundwater were collected and analysed for major ions, metals and isotopes such as ²H and ¹⁸O. In addition, geophysical method was also attempted to understand the subsurface condition. The spatial variation in arsenic (As) indicates that higher concentration was observed around the landfill sites and irrigated regions, which was supported by geochemical, statistical and isotopic inferences. The variation in the As with depth, lithology and sources has been clearly brought out. Though the values of As does not exceed the drinking water permissible limit (10 mg/l), it has reached a near permissible level of 8.7 ppb. Hence, it is essential to understand the geochemical behaviour of As for a proper future management of the water resource in the study area.     

Accretion of Nutrients and Sediment by a Constructed Stormwater Treatment Wetland in the Lake Tahoe Basin

This unique study evaluates the cumulative 16‐year lifetime performance of a wetland retention basin designed to treat stormwater runoff. Sediment cores were extracted prior to basin excavation and restoration to evaluate accretion rates and the origin of materials, retention characteristics of fine particulate matter, and overall pollutant removal efficiency. The sediment and organic layers together accreted 3.2 cm of depth per year, and 7.0 kg/m²/yr of inorganic material. Average annual accretion rates in g/m²/yr were as follows: C, 280; N, 17.7; P, 3.74; S, 3.80; Fe, 194; Mn, 2.68; Ca, 30.8; Mg, 30.7; K, 12.2; Na, 2.54; Zn, 0.858; Cu, 0.203; and B, 0.03. The accretion of C, N, P and sediment was comparable to nonwastewater treatment wetlands, overall, and relatively efficient for stormwater treatment wetlands. Comparison of particle size distribution between sediment cores and suspended solids in stormwater runoff indicated the wetland was effective at removing fine particles, with sediment cores containing 25% clay and 56% silt. A majority of the accretion of most metals and P could be attributed to efficient trapping of allochthonous material, while over half the accretion of C and N could be attributed to accumulation of autochthonous organic matter. Stormwater treatment was shown to be effective when physical properties of a retention basin are combined with the biological processes of a wetland, although sediment accretion can be relatively rapid.