浙江省工业烟粉尘总量控制研究

通过对浙江省工业烟粉尘排放总量和排放源现状进行分析,提出工业烟粉尘减排治理对策,对工业烟粉尘4个重点行业(水泥制造行业、火力发电行业、钢铁行业(包括炼钢、钢压延加工和黑色金属铸造行业)、纺织染整行业(包括棉印染精加工、化纤织物染整精加工和棉织造加工行业)排放源的烟粉尘减排途径和潜力进行分析测算,研究提出工业烟粉尘总量控制措施和建议。     

PW_(12)/g-C_3N_4光催化降解甲基橙

采用浸渍法制备了磷钨酸(PW12)/g-C3N4复合光催化剂,并将其用于溶液中甲基橙的光催化降解,运用IR技术对使用前后的光催化剂进行了表征。表征结果显示,PW12和g-C3N4的结构未在浸渍负载中发生改变,且PW12和g-C3N4结合牢固。实验结果表明:最佳的PW12负载量(光催化剂中PW12的质量分数)为50%;光催化降解甲基橙的优化反应条件为初始甲基橙质量浓度5 mg/L、光催化剂加入量0.6 g/L、初始溶液p H=7;在优化条件下,分别采用紫外光、模拟太阳光、可见光照射120 min后,甲基橙的降解率分别为96.59%,82.23%,42.78%;该光催化剂固载良好,使用中不易发生溶脱,稳定性好,可重复使用。     

复合污染中Triton X-100在膨润土/水界面上的吸附行为

研究了水溶液中膨润土对非离子表面活性剂Triton X-100(X-100)的吸附,重点探讨了阳离子表面活性剂CPC、阴离子表面活性剂SDBS、中性无机盐NaCl及温度对膨润土吸附TX-100的影响.结果表明,Na基膨润土吸附TX-100的效果好于Ca基膨润土;低浓度CPC对膨润土吸附TX-100具有增强作用,当CPC初始浓度大于l0000 mg·L-1(平衡浓度Ce约为1CMC)时具有抑制作用,当CPC浓度低于3000 mg·L-1(Ce约为0.03CMC)时,TX-100吸附量与CPC浓度成线性正相关.SDBS能显著降低膨润土对TX-100的吸附,原因是溶液中SDBS与TX-100混合胶束的形成能阻止TX-100与膨润土硅氧表面间的氢键作用及在其表面形成胶束.NaCl的存在可以大大提高膨润土对TX-100的吸附,去除率由56%提高到99%以上.膨润土对TX-100的吸附随温度升高吸附量增大,其吸附热为12.68 kJ·mol-1,标准自由能的减小和熵值的增大是TX-100在膨润土上吸附的推动力.实验结果对用膨润土处理含表面活性剂废水具有一定的理论价值.     

在线固相萃取-超高效液相色谱法检测水中14种有机磷酸酯

与传统固相萃取耗时长、工作量大、有机溶剂使用量多相比,本文建立了一种在线固相萃取-超高效液相色谱串联质谱方法同时测定地表水中14种有机磷酸酯的新方法.地表水样过膜后,直接注入在线固相萃取净化装置,经净化后进入分离柱分离,用乙腈和0.1%的甲酸水溶液梯度洗脱,采用电喷雾离子源正离子多反应监测模式,对14种有机磷酸酯类化合物进行检测,内标法定量.该方法分析时长13.0 min,方法的线性相关系数R~20.98,地表水和自来水样品的加标回收率在64.8%—113%,相对标准偏差RSD在1.2%—9.3%,检出限为0.1—2.7 ng·L~(-1).与常规方法相比,该方法提高了分析通量和灵敏度,准确度好,操作简便,适用于地表水和自来水中有机磷酸酯的检测.     

表面印迹聚合物吸附复杂基质中的土霉素

为了研究表面分子印迹聚合物对基质复杂的环境样品中的土霉素的吸附分离效果,以应用最为广泛的土霉素(OTC)为研究对象,利用甲基丙烯酸和甲基丙烯酸甲酯为双功能单体、在二氧化硅基质上制备了表面分子印迹聚合物,并对其吸附鸡粪中的四环素类抗生素进行了研究。以聚合物的吸附容量和印迹因子为考核指标,对两种单体的投加比例和二氧化硅的用量进行了优化,确定其合成最佳条件:二氧化硅用量为15 mmol、单体总量一定时各物质的摩尔比为OTC∶MAA∶MMA∶EGDMA=0.08∶2.0∶2.0∶8.0。在此条件下合成的表面印迹聚合物对鸡粪基质中的OTC的最大吸附量可达到9.67 mg/g,印迹因子4.69,可见该表面印迹聚合物对复杂环境样品中的OTC也有良好的吸附性能和识别性能。     

电渗析在丙烯酸丁酯废水预处理中的应用

采用电渗析法预处理丙烯酸丁酯生产废水,可将废水中的有机酸盐浓缩回收,同时大大降低废水的污染物浓度.重点研究了淡水浓水初始体积比的影响,同时考察了电渗析过程中水的迁移.实验确定了淡水浓水的最佳初始体积比为5∶1,此时对COD为61 650 mg/L的废水,COD去除率可达99.5%,脱盐率在99.5%以上,同时可将废水的...     

Preliminary study on removing Cs+/Sr2+ by activated porous calcium silicate—A by-product from high-alumina fly ash recycling industry

¹³⁷Cs⁺/⁹⁰Sr²⁺-containing radioactive wastewater is one of the most important problems that the world has been facing with. A by-product, activated porous calcium silicate, is generated at high levels by the pre-desiliconizing and soda-lime-sintering processes for producing Al₂O₃ from high-alumina fly ash. In order to examine if this by-product could be used as an absorbent for removal of ¹³⁷Cs⁺/⁹⁰Sr²⁺ from radioactive wastewater, various parameters, such as pH, adsorbent dose, contact time, and initial concentration, were discussed. Results indicated that the equilibrium reached in about 2 hr. Activated porous calcium silicate was highly pH sensitive and able to remove Cs⁺/Sr²⁺ in a near-neutral environment. The adsorption equilibrium was best described by Freundlich isotherm equations, and the adsorption of Cs⁺/Sr²⁺ was a physical process. The adsorption kinetic data could be better fitted by the pseudo-second-order model, and the adsorption was controlled by multidiffusion. Current study showed that activated porous calcium silicate has a good adsorption of Cs⁺/Sr²⁺ for their removal. However, other characteristics, such as selectivity because of coexisting cations, elution and regeneration, thermal stability, and acid resistance, should be discussed carefully before using it in an actual field.

Implications:Removing ¹³⁷Cs⁺/⁹⁰Sr²⁺ from radioactive wastewater is one of the tough issues that has been attracting more and more attention world widely, which is the same as fly ash. For recycling high-alumina fly ash, in which Al is extracted to produce Al₂O₃, a huge amount of activated porous calcium silicate is generated year by year. In this paper, this by-product was successfully used as an absorbent to remove ¹³⁷Cs⁺/⁹⁰Sr²⁺ from radioactive wastewater for the first time. Factors that affect the absorbability and the mechanisms were discussed in details, providing a possible choice for disposal of ¹³⁷Cs⁺/⁹⁰Sr²⁺-containing radioactive wastewater.     

萃取净化电镀含镉废水

研究了二壬基萘磺酸(DNNSA)形成的微乳液从模拟含镉废水中萃取镉离子的工艺条件。分别考察了相体积比(O/A)、萃取时间、温度及萃取剂浓度对废水中镉离子萃取的影响。结果表明,萃取平衡时间为10 mim,降低温度及增加萃取剂浓度均有利于萃取。紫外光谱证实当DNNSA萃取镉时,所形成萃合物对萘环的结构无影响,且不会破坏微乳相的结构;分子荧光光谱表明镉离子对配体DNNSA有荧光猝灭作用。     

Phytoavailability and geospeciation of cadmium in contaminated soil remediated by Rhodobacter sphaeroides

A microorganism was isolated from oil field injection water and identified as Rhodobacter sphaeroides. It was used for the remediation of simulated cadmium-contaminated soil. The phytoavailability of Cd was investigated through wheat seedling method to determine the efficiency of remediation. It was found that after remediation, the accumulation of Cd in wheat roots and leaves decreased by 67% and 53%, respectively. The Cd speciation in soil was determined with Tessier extraction procedure. It was found that the total Cd content in soil did not change during the experiments, but the geo-speciation of Cd changed remarkably. Among the five fractions, the concentration of exchangeable phases decreased by 27-46% and that of the phases bound to Fe-Mn oxides increased by 22-44%. The decrease of Cd accumulation in wheat showed significant positive correlation with the decrease of exchangeable phases. It could be concluded that the remediation of R. sphaeroides was carried out through the conversion of Cd to more stable forms. The decrease of sulfate concentration in supernatant indicated that the R. sphaeroides consumed sulfate.