Sand as a relevant fraction in geochemical studies in intertidal environments

Soil and sediment samples from several intertidal environment exposed to different types of contamination were studied to investigate the importance of grain size in relation to the capacity of the substrates to retain trace metals. The unfractionated samples (referred to as bulk samples) were separated into the following grain/size fractions: fine–coarse sand (2?0.100 mm), very fine sand (0.100?0.050 mm), silt (0.050?0.002 mm), and clay (0.002 mm). The sample into its fractions was carried out was in a glove box under high-purity N₂ atmosphere in order to minimize any alterations to the samples. The bulk samples were characterized in terms of physicochemical properties such as pH, redox potential, and grain size. The total organic carbon (TOC), total sulfur (S), iron (Fe) pyrite, Fe, and manganese (Mn), and trace metals lead (Pb), mercury (Hg), chromium (Cr), and nickel (Ni) were analyzed in the bulk samples and in each fraction. The sand fractions were also examined by scanning electron microscopy (SEM). Comparisons of the above parameters were made between fractions and between each fraction and the corresponding bulk sample. The fine–coarse sand fraction contained high levels of the primary elements of the geochemical processes that occur in marine sedimentary environments such as TOC, total Fe, Mn, and S. The net concentrations of these four elements were higher in the fine-coarse sand fraction than in the very fine sand fraction and were similar to the net concentrations in the silt and clay fractions. Detailed SEM analysis of the sand coarse fraction revealed the presence of Fe and aluminum oxyhydroxide coatings in the oxic layers, whereas the framboidal pyrites and coatings observed in the anoxic layers were Fe sulfides. The presence of the various coatings explains why the trace metal concentrations in the sand fine–coarse fraction were similar to those in the clay fraction and higher than those in the very fine sand fraction. The present results highlight the importance of the sand fraction, which is generally disregarded in geochemical and environmental studies of sedimentary layers.     

Assessing post-industrial land cover change at the Pine Point Mine,NWT, Canada using multi-temporal Landsat analysis and landscape metrics

This study investigates land cover change near the abandoned Pine Point Mine in Canada’s Northwest Territories. Industrial mineral development transforms local environments, and the effects of such disturbances are often long-lasting, particularly in subarctic, boreal environments where vegetation conversion can take decades. Located in the Boreal Plains Ecozone, the Pine Point Mine was an extensive open pit operation that underwent little reclamation when it shut down in 1988. We apply remote sensing and landscape ecology methods to quantify land cover change in the 20 years following the mine’s closure. Using a time series of near-anniversary Landsat images, we performed a supervised classification to differentiate seven land cover classes. We used raster algebra and landscape metrics to track changes in land cover composition and configuration in the 20 years since the mine shut down. We compared our results with a site in Wood Buffalo National Park that was never subjected to extensive anthropogenic disturbance. This space-for-time substitution provided an analog for how the ecosystem in the Pine Point region might have developed in the absence of industrial mineral development. We found that the dense conifer class was dominant in the park and exhibited larger and more contiguous patches than at the mine site. Bare land at the mine site showed little conversion through time. While the combination of raster algebra and landscape metrics allowed us to track broad changes in land cover composition and configuration, improved access to affordable, high-resolution imagery is necessary to effectively monitor land cover dynamics at abandoned mines.     

Characterization of As and trace metals embedded in PM10 particles in Puebla City, México

Forty-eight air-filter samples (PM₁₀) were analysed to identify the concentration level of partially leached metals (PLMs; As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and V) from Puebla City, México. Samples were collected during 2008 from four monitoring sites: (1) Tecnológico (TEC), (2) Ninfas (NIN), (3) Hermanos Serdán (HS) and (4) Agua Santa (AS). The results indicate that in TEC, As (avg. 424 ng m^?3), V (avg. 19.2 ng m^?3), Fe (avg. 1,202 ng m^?3), Cu (avg. 86.6 ng m^?3), Cr (41.9 ng m^?3) and Ni (18.6 ng m^?3) are on the higher side than other populated regions around the world. The enrichment of PLMs is due to the industrial complexes generating huge dust particles involving various operations. The results are supported by the correlation of metals (Mn, Cd and Co) with Fe indicating its anthropogenic origin and likewise, As with Cd, Co, Fe, Mn, Pb and V. The separate cluster of As, Fe and Mn clearly signifies that it is due to continuous eruption of fumaroles from the active volcano Popocatépetl in the region.     

Assessing the ecological effects of human impacts on coral reefs in Bocas del Toro,Panama

Environmental and biological reef monitoring was conducted in Almirante Bay (Bahía Almirante) in Bocas del Toro, Panama, to assess impacts from anthropogenic developments. An integrated monitoring investigated how seasonal temperature stress, turbidity, eutrophication and physical impacts threatened reef health and biodiversity throughout the region. Environmental parameters such as total suspended solids [TSS], carbon isotopes (δ¹³C), C/N ratios, chlorophyll a, irradiance, secchi depth, size fractions of the sediments and isotope composition of dissolved inorganic carbon [DIC] of the water were measured throughout the years 2010 and 2011 and were analysed in order to identify different impact sources. Compared to data from Collin et al. (Smithsonian Contributions to the Marine Sciences 38:324–334, 2009) chlorophyll a has doubled at sites close to the city and the port Almirante (from 0.46–0.49 to 0.78–0.97 μg l^?1) and suspension load increased, visible by a decrease in secchi depth values. Visibility decreased from 9-13 m down to 4 m at the bay inlet Boca del Drago, which is strongly exposed to river run off and dredging for the shipping traffic. Eutrophication and turbidity levels seemed to be the determining factor for the loss of hard coral diversity, most significant at chlorophyll a levels higher than 0.5 μg l^?1 and TSS levels higher than 4.7 mg l^?1. Hard coral cover within the bay has also declined, at some sites down to <10 % with extremely low diversities (7 hard coral species). The hard coral species Porites furcata dominated the reefs in highly impacted areas and showed a strong recovery after bleaching and a higher tolerance to turbidity and eutrophication compared to other hard coral species in the bay. Serious overfishing was detected in the region by a lack of adult and carnivorous fish species, such as grunts, snappers and groupers. Study sites less impacted by anthropogenic activities and/or those with local protection showed a higher hard coral cover and fish abundance; however, an overall loss of hard coral diversity was observed.     

Recurrent disease outbreaks in corneous demosponges of the genus Ircinia: epidemic incidence and defense mechanisms

During 2008 and 2009, an epidemic affected sponges of the genus Ircinia in the Western Mediterranean. Investigations at a site on the European coast (6o43′08.80′′N; 3o43′52.20′′W) and another on the African coast (35o10′51.00′′N; 2o25′33.00′′W) revealed healthier African populations. The disease started with small pustules on the sponge surface, which subsequently coalesced forming larger, extensive lesions. An ultrastructural study suggested that a twisted rod is the etiological agent. It infected the sponges from the outside, initially killing the cells below the ectosome and then penetrating deeper into the body. The sponges responded to the bacterial progression by secreting concentric barriers of collagen and concentrating phagocytic cells at the diseased zones. This primitive immune system successfully resisted the disease in many instances, although mortality reached 27% in the studied populations. Epidemic outbreaks recur each year in September through November, arguably favored by abnormally high seawater temperatures in August.     

Effects of golpar (<Emphasis Type="Italic">Heracleum persicum</Emphasis> Desf.) and probiotics in drinking water on performance,carcass characteristics,organ weights,blood plasma constituents,and immunity of broilers

Increasing levels of Heracleum persicum (golpar) in drinking water were studied in broilers. Two hundred and forty-one-day-old male chickens were allocated to one of six treatments: control, without added phytogenics nor probiotics in drinking water, and probiotics at recommended manufacturer’s level (P) or 1.0, 1.5, 2.0, and 2.5 ml/l of golpar extract solution (G1, G1.5, G2, and G2.5 treatments, respectively) in drinking water. As a result of this study, no linear or quadratic trends in the feed intake (FI) and feed conversion rate (FCR) due to golpar supplementation were found. Body weight gain, final body weight, and relative carcass weight showed a positive linear response with increasing levels of golpar supplementation. Neither golpar nor probiotics had effects on the percentages of edible parts of the carcass. Golpar supplementation levels caused a linear negative response of the albumin content in blood plasma, whereas both abdominal fat as percentage of carcass weight and uric acid levels in blood plasma linearly increased. The effects on Ig responses were only observed at 42 days of age and were similar in probiotics and the highest level of golpar supplementation. Based on our results, both probiotics and golpar supplementation could improve broiler performance and immune function.     

Paving the way for the ISO 14006 ecodesign standard: an exploratory study in Spanish companies

A Spanish ecodesign standard (the UNE 150301) is being used as a basic reference point in paving the way for the future ISO 14006 ecodesign standard which may foreseeably be passed in 2011. This article aims to analyze the experience regarding adoption of the UNE 150301 in Spain.Following an analysis of the standard’s structure, its objectives and scope, its real implementation process is then analyzed based on an exploratory qualitative study carried out in four Spanish companies that have been pioneers in adopting this environmental standard. The conclusion is drawn in the article that in all the cases analyzed, the greatest source of impact occurs in the phase in which the product is used and is related to energy consumption. Companies appear to be satisfied with the adoption of this standard and, in particular, point out that they have managed to reduce the environmental impact of their products. However, they draw attention to the fact that, to deal with certain instances of impact that increases in cost entail, administrative bodies need to establish mandatory regulations, as environmentally-friendly companies would otherwise lose competitiveness.     

Affordability of residential water tariffs: Alternative measurement and explanatory factors in southern Spain

Using information on a basic or “lifeline” level of domestic water use obtained from a water demand function based on a Stone–Geary utility function, a minimum water threshold of 128 m³ per household per year was estimated in a sample of municipalities in Southern Spain. As a second objective, water affordability indexes were then calculated that relate the cost of such lifeline to average municipal income levels. The analysis of the factors behind the differences in that ratio across Andalusian municipalities shows that the relative cost of purchasing the lifeline appears inversely related to average income levels, revealing an element of regressivity in the component of water tariffs affecting the least superfluous part of the household’s consumption. The main policy recommendation would involve redesigning water tariffs in order to improve access for lower income households to an amount of water sufficient to cover their basic needs. The proposed methodology could be applied to other geographical areas, both from developed and from developing countries, in order to analyze the degree of progressivity of the water tariffs currently in effect and in order to guide the design of more equitable regulatory policies.