Electrochemical and spectroscopic characteristics of dissolved organic matter in a forest soil profile

Dissolved organic matter （DOM） represents one of the most mobile and reactive organic compounds in ecosystem and plays an important role in the fate and transport of soil organic pollutants, nutrient cycling and more importantly global climate change. Electrochemical methods were first employed to evaluate DOM redox properties, and spectroscopic approaches were utilized to obtain information concerning its composition and structure. DOM was extracted from a forest soil profile with five horizons. Differential pulse voltammetry indicated that there were more redox-active moieties in the DOM from upper horizons than in that from lower horizons. Cyclic voltammetry further showed that these moieties were reversible in electron transfer. Chronoamperometry was employed to quantify the electron transfer capacity of DOM, including electron acceptor capacity and electron donor capacity, both of which decreased sharply with increasing depth. FT-IR, UV-Vis and fluorescence spectra results suggested that DOM from the upper horizons was enriched with aromatic and humic structures while that from the lower horizons was rich in aliphatic carbon, which supported the findings obtained by electrochemical approaches. Electrochemical approaches combined with spectroscopic methods were applied to evaluate the characteristics of DOM extracted along a forest soil profile. The electrochemical properties of DOM, which can be rapidly and simply obtained, provide insight into the migration and transformation of DOM along a soil profile and will aid in better understanding of the biogeochemical role of DOM in natural environments.     

γ-Fe_2O_3/膨胀石墨复合材料吸附废水中六价铬的应用研究

介绍了采用溶胶凝胶法合成新型的复合材料-磁性的γ-Fe_2O_3膨胀石墨(MEG)复合材料。通过采用X-射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)以及X-光电子能谱仪(XPS)对该复合材料MEG进行了表征,结果表明MEG中γ一Fe_2O_3的粒径约为50nm,而且其中γ一Fe_2O_3和膨胀石墨通过C=O相互作用。复合材料MEG作为新型的六价铬吸附剂,通过吸附时间、初始溶液的pH值以及再生性对该吸附过程进行了考察。结果表明:在40 min内MEG吸附六价铬的过程基本达到平衡;在初始溶液的pH为3.5时,MEG对六价铬的最大吸附量可以达到16.4mg/g;而且该复合材料MEG重复使用3次后吸附效果基本没有下降。因此,复合材料MEG对于废水中六价铬的处理有选择性吸附作用,而且初始溶液的pH值对其吸附过程起着重要作用。     

蒙脱石对Co2+吸附机理和性能研究

随着锂电池的广泛使用,废弃锂电池中所含的钴元素以离子形式开始进入地下水中。文章以吸附水中钴离子为研究内容。系统研究了吸附时间、溶液浓度、温度以及pH值对其吸附性能的影响。结果表明:蒙脱石对钴离子的平衡吸附时间约为1 h;在303 K下蒙脱石对钴离子的最大吸附量约为30.77 mg/g,且吸附方程可以用Langmuir模型进行良好的拟合;吸附行为符合拟二级动力学方程;最佳pH环境为弱酸性。     

高锰酸盐指数测定方法的现状及研究动态

较为全面地论述了高锰酸盐指数测定方法的发展及研究现状,指出研究试剂用量少、分析速度快、省时节能、简单易行,能同时测定多个样品的CODMn测定方法具有极为重要的意义,而研究与应用适应性强、污染少、运行可靠、性价比高的高锰酸盐指数在线监测仪则是CODMn监测的发展趋势。     

西南村镇生活污水处理技术适宜性研究分析

以玉溪市作为研究区,以CASS、DSTE、ABR一人工湿地集成处理工艺、厌氧段一土壤净化槽集成处理工艺等常用村镇生活污水处理工艺作为调查对象,在查明各工程实例运行功效的基础上,分析探讨了我国西南地区村镇生活污水处理技术的适宜性。     

Tool wear of coated drills in drilling CFRP

This study aimed to investigate the wear of certain coated drills when drilling carbon fiber reinforced composites (CFRP). Three different drills were used in the drilling experiments: uncoated, diamond coated and AlTiN coated carbide (WC–Co) drills. The tool wear in CFRP machining was quite different from that in conventional metal machining. The primary wear type was a dulling or blunting of the cutting edge, which has been referred to as edge rounding wear or edge recession. In this paper, a hypothesis has been developed to explain the edge rounding wear in CFRP machining. Due to the fracture-based chip formation of CFRP, there is lack of the work material stagnation zone in front of the cutting edge, which normally prevents the edge wear in metal machining. Series of wear lead to rapid dulling of the cutting edge. The resistance to edge rounding wear on the coated as well as uncoated drills has been investigated. The diamond coating significantly reduces the edge rounding wear. However, AlTiN coated drills showed no visible improvement over the uncoated carbide drill, despite of their high hardness, thus not protecting the drill. The wear mechanisms of the uncoated carbide drill and coatings are discussed. It is believed that the 2-body and 3-body abrasive wear fail to explain the observed tool wear in CFRP drilling. However, the wear of the coatings and uncoated carbide substrate from tribo-meter tests correlated well with the tool wear in the CFRP drilling. Therefore, the tribo-meter test can be used to screen the prospective tool materials before carrying drilling experiment.     

城市燃气管道系统安全管理模式探讨

我国城市燃气管道系统的安全管理目前基本上还是采用传统的安全管理模式,注重安全技术的研究,使得安全管理处于管理跟着事故跑的被动管理状态。本文打破了传统的安全管理模式,将现代企业管理的思想、管理方式与安全系统工程理论相结合,提出了"321"以人为根本的城市燃气管道系统安全管理模式,形成了"以人为根本、竞争为核心、文化做保障"的管理状态,并在注重安全技术管理的同时,强调组织文化在系统安全管理中的重要地位,以期解决我国城市燃气管道系统中长期存在的安全管理的断点、难点问题。     

基于HSE作业指导卡的风险精细管控模式

结合胜利油田电力生产实际,提出了基于HSE作业指导卡的风险精细管控模式,介绍了HSE作业指导卡的格式内容、工作流程和实施效果。     

弧形深基坑开挖对周边环境影响分析

弧形基坑围护结构土体作用的空间效应明显,形成的拱效应能减少开挖对周边环境影响。本文介绍某综合业务楼基坑弧形段围护设计方案,以及针对弧段基坑变形控制所采取的配套加固措施。采用FLAC3D对弧段基坑进行模拟计算,分析弧形段基坑支护结构空间变形特征及周边环境影响,总结弧形基坑设计及变形控制关键技术,为类似基坑工程设计、施工提供参考。     

芬顿氧化试验中残余双氧水对CODcr测定的影响研究

在采用Fenton高级氧化技术对垃圾压滤液进行处理时,作为氧化剂的双氧水经常不能完全消耗。而使用重铬酸钾法进行CODcr测定时,待测水体中残余的双氧水会表现出还原性而消耗重铬酸钾,对最终CODcr测定结果产生影响。本文分析了在垃圾压滤液中不同浓度双氧水对CODcr测定的影响大小,得出双氧水浓度对CODcr影响曲线,同时为消除双氧水对CODcr测定结果影响,在试验中投加过量硫酸亚铁与双氧水反应,当投加量达到理论反应量的1.0～1.2倍时,对双氧水去除效果最好,使后续的CODcr测定试验更加准确。