Medical waste management in China: A case study of Nanjing

Medical waste management is of great importance due to its infectious and hazardous nature that can cause undesirable effects on humans and the environment. The objective of this study was to analyze and evaluate the present status of medical waste management in the light of medical waste control regulations in Nanjing. A comprehensive inspection survey was conducted for 15 hospitals, 3 disposal companies and 200 patients. Field visits and a questionnaire survey method were implemented to collect information regarding different medical waste management aspects, including medical waste generation, segregation and collection, storage, training and education, transportation, disposal, and public awareness.The results indicated that the medical waste generation rate ranges from 0.5 to 0.8 kg/bed day with a weighted average of 0.68 kg/bed day. The segregated collection of various types of medical waste has been conducted in 73% of the hospitals, but 20% of the hospitals still use unqualified staff for medical waste collection, and 93.3% of the hospitals have temporary storage areas. Additionally, 93.3% of the hospitals have provided training for staff; however, only 20% of the hospitals have ongoing training and education. It was found that the centralized disposal system has been constructed based on incineration technology, and the disposal cost of medical waste is about 580 US$/ton. The results also suggested that there is not sufficient public understanding of medical waste management, and 77% of respondents think medical waste management is an important factor in selecting hospital services.The problematic areas of medical waste management in Nanjing are addressed by proposing some recommendations that will ensure that potential health and environmental risks of medical waste are minimized.     

火焰原子吸收光度法测定水中铝的方法改进

研究了在盐酸介质中，壬基酚聚氧乙烯-7醚（NP-7）活化下，火焰原子吸收光度法测定环境水体中铝的方法改进。在25mL容量瓶中，加入5．0mL体积分数为50％的盐酸、2．0mL质量浓度为0．01g／mL NP-7和4．0mL质量浓度为75．0μg/mL的铝标准溶液，在原子吸收分光光度计的最佳测定条件下测定吸光度。根据吸光度与铝质量浓度绘制了工作曲线，线性范围3．0～24．0μg/mL，检出限1．32μg/mL。该法用于环境水体中铝含量的测定，加标回收率为94．4％～101．4％，最大相对标准偏差5．8％，方法对比最大相对误差4．1％。     

Effects of plant density on the photosynthetic and chloroplast characteristics of maize under high-yielding conditions

The Science of Nature - Knowledge on animal personality has provided new insights into evolutionary biology and animal ecology, as behavioural types have been shown to affect fitness. Animal...     

滑行车类游乐设施动力学建模与仿真

根据滑行车类游乐设施运行速度高、加速度大、载荷工况复杂,发生事故后果非常严重的现状,认为深入的动力学分析、结构强度校核和寿命分析预测对保证其安全性尤为必要。因而分析滑行车的结构原理,提出其多体系统拓扑构型,包括轮轨关系模型、各零部件之间约束模型。运用图形学方法研究了滑行车轨道建模参数提取和坐标变换技术。通过仿真分析,在设计阶段就可获得滑行车在不同工况下运行时各部件的速度、加速度及载荷时间历程,为结构设计、安全性评估提供可靠依据。实例表明,分析结果与实测数据非常接近,所提出的建模方法是可行的。     

欧盟环保新指令拷问中国陶瓷出口

中国企业再次遭遇欧盟的环保大限。不久前实施的欧盟Rohs指令被公认为是对国内电子行业的一次集体环保大考，而这次所出台的环保新指令，又使得国内陶瓷出口企业站在了环保考验的浪尖之上。     

贫困地区可持续发展指标体系及其综合评估--以湖南湘西贫困地区为例

本文依据贫困地区可持续发展固有的制约因素，特殊的内涵与目标，首次利用压力（Pressure)——状态（State)——响应（Respons)模型，构建了贫困地区可持续发展指标体系，并采用专家咨询与定量模型相结合的方法，对湖南湘西贫困地区可持续发展水平作了实证评估与分析。     

Three-dimensional hydrodynamic and water quality model for TMDL development of Lake Fuxian, China

Lake Fuxian is the largest deep freshwater lake in China. Although its average water quality meets Class I of the China National Water Quality Standard (CNWQS), i.e., GB3838-2002, monitoring data indicate that the water quality approaches the Class II threshold in some areas. Thus it is urgent to reduce the watershed load through the total maximum daily load (TMDL) program. A three-dimensional hydrodynamic and water quality model was developed for Lake Fuxian, simulating flow circulation and pollutant fate and transport. The model development process consists of several steps, including grid generation, initial and boundary condition configurations, and model calibration processes. The model accurately reproduced the observed water surface elevation, spatiotemporal variations in temperature, and total nitrogen (TN), total phosphorus (TP), and chemical oxygen demand (COD) concentrations, suggesting a reasonable numerical representation of the prototype system for further TMDL analyses. The TMDL was calculated using two interpretations of the water quality standards for Class I of the CNWQS based on the maximum instantaneous surface and annual average surface water concentrations. Analysis of the first scenario indicated that the TN, TP and COD loads should be reduced by 66%, 68% and 57%, respectively. Water quality was the highest priority; however, local economic development and cost feasibility for load reduction can pose significant issues. In the second interpretation, the model results showed that, under the existing conditions, the average water quality meets the Class I standard and therefore load reduction is unnecessary. Future studies are needed to conduct risk and cost assessments for realistic decision-making.     

实时合成水滑石分离模拟放射性核素锶的研究

采用实时合成水滑石的方法从高放废液中分离模拟放射性核素锶,通过单因素实验并借助XRD分析确定了最佳分离实验条件,同时,运用FTIR、SEM等技术手段对合成的含锶水滑石的结构、形貌进行了分析.结果表明,当Sr2+初始浓度为70mg.L-1、pH值为10.5、n(Mg+Sr)/n(Al)为3时,锶的去除率最高可达95%以上;XRD和SEM分析结果表明,锶嵌入了水滑石的晶格中,合成的含锶水滑石形貌为层状六边形;含锶水滑石煅烧产物主要为尖晶石,且煅烧产物中未见氧化锶,表明嵌入到水滑石晶格中的锶在煅烧后存在于尖晶石的晶体结构中.     

1980—2010年温榆河的水环境质量时空演变特征

以温榆河流域的主要超标污染物 COD 和氨氮为研究对象,通过历史数据和现场调查,系统研究了1980—2010年间温榆河的水环境质量时空演变特征.结果表明,温榆河流域水环境质量经历了清洁-污染-重度污染-污染遏制的过程,但水质现状均不达标;温榆河流域水环境质量好坏依次是上段>下段,温榆河>坝河>清河,并且Pearson相关分析表明,温榆河下段COD和NH+4-N浓度主要受清河影响;温榆河流域COD污染逐步遏制(超标倍数<1)、NH+4-N污染凸显(超标倍数8～20),耗氧物质处于从COD为主向NH+4-N为主转换的阶段;支流清河和坝河不仅是温榆河干流入河污染负荷的首要输入途径,而且支流上污水集中处理设施的排水是温榆河干流的首要补给来源(70.1%),其运行状况与升级改造对改善温榆河水环境质量至关重要.     

基于SOM和多元分析的滇池沉积物污染特征空间模式研究

联合运用层次聚类分析(HCA)、判别分析(DA)和自组织映射神经网络(SOM)3种数值方法,对滇池2008—2010年17个底泥监测点位(10个常规点位及7个新增点位)9种污染物进行空间差异性和相似性分析,并评价各指标在空间的分布特征及监测点代表性.结果表明:滇池沉积物整体污染程度为草海>外海中部及南部>外海北部.As、Hg、Pb、Cd、Cu和Zn污染最严重的点位是断桥;草海中心的凯氏氮污染最严重,其他指标污染水平仅次于断桥;Cr和TP污染最严重的点位是新增点位盘龙江2;海埂是全局污染最轻的点位.现有的常规监测点位对整体污染特征的代表性较弱,建议取消异质性最低的白鱼口、观音山西、观音山东和罗家营站点;考虑污染特征和监测点位空间分布的均匀性,建议将盘龙江2、海埂和马料河设为常规监测点位.