Fe3O4@SiO2-Chitosan的制备及其对水中Cu2+的吸附效能研究

以SiO_2包覆Fe_3O_4,戊二醛为交联剂,交联壳聚糖(Chitosan, CTS),制得Fe_3O_4@SiO_2-Chitosan复合磁性纳米粒子.以Fe_3O_4和Fe_3O_4@SiO_2为对照,采用X射线衍射、透射电镜和傅立叶红外光谱对其进行表征分析,并测定了投加量、pH值、吸附时间和温度等因素对Cu~(2+)吸附效果的影响,从动力学、热力学以及再生回用性能评价等方面对其吸附性能进行了探究.结果表明Fe_3O_4@SiO_2-Chitosan对Cu~(2+)的吸附过程符合准二级吸附动力学模型和Langmuir模型,为自发、放热、优惠型的单分子层化学吸附.在pH为6.0, 298 K下达到最大吸附量154.8 mg·g~(-1),吸附解吸4次后吸附容量变化不大,说明Fe_3O_4@SiO_2-Chitosan具有较高的吸附容量,可作为处理含铜废水和回收铜的高效吸附剂.     

活性炭的表面性质对CeOx/AC催化臭氧氧化水中苯甲酸的影响机制

实验对活性炭(activated carbon,AC)进行了氧改性、氮改性、硫改性和氮-硫共改性,考查AC的表面性质对CeO_x/AC催化臭氧氧化苯甲酸性能的影响.结果表明,相比氧改性活性炭ACO、硫改性活性炭ACS和氮改性活性炭ACN,氮-硫共改性活性炭ACNS由于含氮官能团和含硫官能团的引入,提高了对苯甲酸的吸附性能和催化臭氧氧化性能.采用氮-硫共改性活性炭为载体制备的CeO_x/ACNS催化剂表面Ce~(3+)含量最高,因而具有最高的催化活性,反应30 min,苯甲酸的去除率由单独臭氧氧化的22%提高到88%,TOC的去除率单独臭氧氧化的7%提高到55%.CeO_x/ACNS催化剂具有良好的稳定性,循环使用6次,苯甲酸的去除率仅从88%降低到82%,整个过程中活性组分Ce的流失只占负载量的0.32%,是一种很有应用潜力的臭氧氧化催化剂.     

电磁波加载回流污泥对A2O厌氧池功能的影响

基于电磁波加载污泥的生物效应和溶出效应,将A²O系统的回流污泥进行电磁波加载,以期从微生物群落结构变化角度考察其对系统中厌氧池功能的影响.结果表明,电磁波加载回流污泥后,污泥絮体分解,细胞破壁;回流污泥中C、N、P的溶出效应显著.与加载前对比,厌氧池中TP富集效果更明显,富集率由122.9%增至152.2%;TN、COD去除率分别由7.3%、58.8%上升为32.1%和65.4%.MiSeq焦磷酸测序分析表明,回流污泥经电磁波加载后,厌氧池微生物群落的丰度增加,但其微生物多样性降低.碳源得到补充,厌氧池中微生物的代谢活性明显提高,活菌数量增加.厌氧池中富集了Zoogloea、Tolumonas、Dechloromonas等菌属.     

基于空间分析荞麦地流域地下水健康风险评价

以云南荞麦地流域为研究区域,对该区域2017年24个地下水样品中5种重金属指标（Cr、Pb、Co、Mn、Hg）和1种无机毒理指标（氟化物）进行测定和分析,并基于半方差模型等地学统计方法,对地下水健康风险评价进行空间分析.结果表明：地下水通过饮水途径所引起的成人和儿童的健康风险分别为9.27×10^-10~4.59×10^-5a^-1和1.10×10^-8~5.46×10^-4a^-1.地下水健康风险评价值以Cr为主导,成人与儿童存在较高的一致性.地下水健康风险存在很强的空间规律性,在南北方向上呈条带状分布.受位于中游的药山镇影响,研究区南部下游地区地下水健康风险显著增加.     

Glass fiber supported BiOI thin-film fixed-bed photocatalytic reactor for water decontamination under solar light irradiation

BiOI powder has been proved to be an efficient photocatalyst, but the difficulty in removing it from water after reaction limits its application in real water treatment. To solve this problem,a thin-film fixed-bed reactor(TFFBR) was set-up by developing a BiOI thin film on glass fiber cloth(GFC). The composition and structure of the as-prepared films were characterized with X-ray diffraction, X-ray photoelectron spectroscopy, field emission microscopy, transmission electron microscopy and Fourier transform infrared spectroscopy. The BiOI thin film was made by painting a silica sol containing BiOI on GFC, which could be tailored to desired sizes to accommodate the TFFBR. The mass of BiOI on the GFC increased with the number of iterations of the painting process. SiO2 sol glued the BiOI particles tightly onto the GFC,making the thin film strong enough to resist fluid flushing in the TFFBR. The photocatalytic activity of the BiOI thin film was investigated by degrading bisphenol A(BPA) under simulated sunlight. Ninety eight percent of BPA(20 mg/L in 2 L) was degraded by the BiOI thin film sample of seven layers(GFC-7) on the TFFBR within 8 hr irradiation. The GFC-7 displayed good photocatalytic ability toward artificial sewage containing BPA in a wide pH range(5–9),and also demonstrated excellent durability and reusability. The working conditions were optimized and it was found that the thickness of the fluid film and residence time over the thin film were key factors affecting the photocatalytic efficiency.     

中国超大城市碳排放达峰的影响因素及组合情景预测——基于门限-STIRPAT模型的研究

城市是中国碳排放的重要来源,而超大城市的碳达峰研究对国内其他城市和全国能否实现碳达峰目标具有重要的现实意义.以北京、上海、广州、深圳、天津和重庆等6个超大城市为研究对象,能源强度为门限变量,建立门限-STIRPAT模型,首先确定6个超大城市碳排放的驱动因素,然后对27种情景下的各城市碳排放达峰进行预测.研究结果表明:①人口、人均GDP和能源强度对各城市碳排放起到正向促进效应,人口的影响效应最大,其次是能源强度,人均GDP对碳排放的影响最小.②能源强度对二氧化碳排放的影响呈阶段性变化特征.③北京、上海和重庆在高能源强度下降率的情景下,已经达峰;天津、除最宽松的高-高-高情景外的广州和深圳会在2030年前实现达峰.如果能源强度以中速率下降,6个城市碳排放不能保证一定能在2030年前达峰.如果能源强度以低速率下降,6个城市均不能在2030年前达峰.本研究有利于明确超大城市碳排放的影响因素,对其他城市尽快实现碳排放达峰具有借鉴意义,为全国实现碳达峰目标提供可行的研究思路.     

闽三角城市群自然资本损失评估

在快速城镇化进程中,城市群发展在促进区域经济竞争与合作的同时,也在一定程度上造成人地关系矛盾的加剧,生态系统服务水平下降。为了量化城镇化对自然资本产生的变动,揭示人类资源消耗过程对区域生态系统服务的影响机制,以快速城镇化的典型区域——闽三角城市群为例,运用能值分析方法与GIS技术,分析了2000-2015年闽三角城市群可更新资源时空演变特征,城镇化进程中生态环境价值演变规律以及土地转化过程中的自然资本损失。研究结果表明：（1）闽三角城市群可更新资源在时间上呈波动减小趋势,空间上自沿海区域向内陆区域逐渐升高;（2）高环境质量等级中城镇用地面积占比呈显著增加趋势,由0增加到10.63%,人类活动导致区域生态环境价值的损失逐渐上升;（3）城镇化过程中由于城市空间扩张,使部分自然用地与农业用地转化为城镇用地,转化过程造成的自然资本损失总量为1.27×10²² seJ,货币价值超过6.30×10⁹元。研究有助于完善城镇化影响下的生态环境效应研究,为城市群或区域生态环境管理与修复提供决策参考。     

Development of a model to simulate soil heavy metals lateral migration quantity based on SWAT in Huanjiang watershed, China

Lateral transportation of soil heavy metals in rainfall events could significantly increase the scope of pollution. Therefore, it is necessary to develop a model with high accuracy to simulate the migration quantity of heavy metals. A model for heavy metal migration simulation was developed based on the SWAT(Soil and Water Assessment Tool) model. This model took into consideration the influence of soil p H value, soil particle size, runoff volume, sediment amount,concentration of water-soluble heavy metals dissolved in runoff and insoluble absorbed to the soil particles. This model was reasonable in Huanjiang watershed, Guangxi Zhuang Autonomous Region, south China, covering an area of 273 km~2. The optimal drainage area threshold was determined by analyzing the effects of watershed subdivision on the simulation results to ensure the simulation accuracy. The main conclusions of this paper were:(1) watershed subdivision could affect simulation migration quantity of heavy metals;(2) the quantity of heavy metals transported by sediment accounted for 97%–99% of the total migration quantity in the study watershed. Therefore, sediment played the most important role in heavy metal migration;(3) the optimal drainage area threshold percentage to ensure high simulation accuracy was determined to be 2.01% of the total watershed;(4) with the optimal threshold percentage, this model could simulate the migration quantity of As, Pb and Cd accurately at the total watershed and subwatershed level. The results of this paper were useful for identifying the key regions with heavy metal migration.     

Highly catalytic activity of Mn/SBA-15 catalysts for toluene combustion improved by adjusting the morphology of supports

Rod-like, hexagonal and fiber-like SBA-15 mesoporous silicas were synthesized to support MnO_x for toluene oxidation. This study showed that the morphology of the supports greatly influenced the catalytic activity in toluene oxidation. MnO_x supported on rod-like SBA-15(R-SBA-15) displayed the best catalytic activity and the conversion at 230°C reached more than 90%, which was higher than the other two catalysts. MnO_x species consisted of coexisting MnO_2 and Mn_2O_3 on the three kinds of SBA-15 samples. Large amounts of Mn_2O_3 species were formed on the surface and high oxygen mobility was obtained on MnO_x supported on R-SBA-15, according to the H_2 temperature programmed reduction(H_2-TPR)and X-ray photoelectron spectroscopy(XPS) results. The Mn/R-SBA-15 catalyst with greater amounts of Mn_2O_3 species possessed a large amount of surface lattice oxygen, which accelerated the catalytic reaction rate. Therefore, the surface lattice oxygen and high oxygen mobility were critical factors on the catalytic activity of the Mn/R-SBA-15 catalyst.     

基于动态时间弯曲算法的核电厂瞬态识别方法研究

目的对核电厂运行瞬态识别进行有效识别。方法基于动态时间弯曲算法,计算运行瞬态中温度、压力和流速数据与设计瞬态中对应数据之间的相似程度,通过定义等效相似度反应温度、压力和流速的不同权重。在完成当前运行瞬态与各条设计瞬态之间的相似程度后,通过比较相似度值,将运行瞬态归类为设计瞬态。结果通过对"华龙一号"核电厂的设计瞬态和基于设计瞬态摄动获得的虚拟运行瞬态进行验证,文中提出的方法能够快速有效地对运行瞬态进行分类,结果显示,有95%以上的运行瞬态能够被正确识别。结论基于动态时间弯曲算法和等效相似度建立的瞬态识别方法具有高效、准确等优点,能够有效应用于核电厂的疲劳监测系统。