Evaluation of Korean recycled aggregates as backfilling underground power system considering particle breakage effect

Journal of Material Cycles and Waste Management - Attempts have been made to address the strict regulations on eco-friendly construction and recycle aggregate resources, encouraging researchers to...     

Characteristics of metal contamination in paddy soils from three industrial cities in South Korea

Paddy soil contamination is directly linked to human dietary exposure to toxic chemicals via crop consumption. In Korea, rice paddy fields are often located around industrial complexes, a major anthropogenic source of metals. In this study, rice paddy soils were collected from 50 sites in three industrial cities to investigate the contamination characteristics and ecological risk of metals in the soils. The cities studied and their major industries are as follows: Ulsan (petrochemical, nonferrous, automobile, and shipbuilding), Pohang (iron and steel), and Gwangyang (iron and steel, nonmetallic, and petrochemical). Thirteen metals (Al, As, Ba, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V, and Zn) were analyzed using inductively coupled plasma–optical emission spectrometry (ICP–OES). The mean concentration of Cd (1.98 mg/kg) exceeded the soil quality guideline of Canada (1.4 mg/kg), whereas concentrations of other metals were under the standards of both Korea and Canada. Generally, levels of metal concentrations decreased with increasing distance from industrial complexes. Among the three cities, Pohang showed high concentrations of Zn (142.2 mg/kg), and Ulsan and Gwangyang showed high concentrations of Cr (33.9 mg/kg) and Ba (126.4 mg/kg), respectively. These contamination patterns were influenced by the different major industries of each city, which was clearly demonstrated by the principal component analysis results. Pollution indices suggested that As, Cd, Pb, and Zn were enriched in the paddy soils via anthropogenic activities. Comprehensive potential ecological risk indices were at considerable levels for most sites, especially because of major contributions from As and Cd, which can pose potential ecological threats.

     

Submerged arc plasma system combined with ozone oxidation for the treatment of wastewater containing non-degradable organic compounds

• Submerged arc plasma was introduced in terms of wastewater treatment. • Ozone oxidation was coupled with submerged arc plasma system. • Ozone was converted into O and O₂ by submerged arc plasma. • Decomposition rate was accelerated by submerged arc plasma. • Introduction of ozone led to significant increase in mineralization. Submerged arc plasma technology was assessed for the removal of phenols from wastewater. The OH radicals generated from the boundary between the plasma and waste solution were considered as a significant factor on the degradation reaction. In this study, the effects of highly energetic electrons released from the submerged arc plasma were mainly studied. The highly energetic electrons directly broke the strong chemical bond and locally increased the reaction temperatures in solution. The effects of the submerged-arc plasma on the decomposition of phenol are discussed in terms of the input energy and initial concentration. The single use of submerged arc plasma easily decomposed the phenol but did not increase the mineralization efficiency. Therefore, the submerged arc plasma, coupled with the ozone injection, was investigated. The submerged arc plasma combined with ozone injection had a synergic effect, which led to significant improvements in mineralization with only a small increase in input energy. The decomposition mechanism of phenol by the submerged arc plasma with the ozone was analyzed.     

Electrochemical conversion of biomass-derived aldehydes into fine chemicals and hydrogen: A review

Environmental Chemistry Letters - The decrease in fossil fuel usage and the projected 28% increase in the global energy demand by 2040 are calling for advanced methods to convert modern biomass...     

An empirical survey of the benefits of implementing pay for safety scheme (PFSS) in the Hong Kong construction industry

Introduction

The Government of the Hong Kong Special Administrative Region (SAR) has implemented different safety initiatives to improve the safety performance of the construction industry over the past decades. The Pay for Safety Scheme (PFSS), which is one of the effective safety measures launched by the government in 1996, has been widely adopted in the public works contracts. Both the accident rate and fatality rate of public sector projects have decreased noticeably over this period.

Method

This paper aims to review the current state of application of PFSS in Hong Kong, and attempts to identify and analyze the perceived benefits of PFSS in construction via an industry-wide empirical questionnaire survey. A total of 145 project participants who have gained abundant handson experience with the PFSS construction projects were requested to complete a survey questionnaire to indicate the relative importance of those benefits identified in relation to PFSS. The perceived benefits were measured and ranked from the perspectives of the client and contractor for crosscomparison.

Results

The survey findings suggested the most significant benefits derived from adopting PFSS were: (a) Increased safety training; (b) Enhanced safety awareness; (c) Encouragement of developing safety management system; and (d) Improved safety commitment. A wider application of PFSS should be advocated so as to achieve better safety performance within the construction industry.

Impact on Industry

It is recommended that a similar scheme to the PFSS currently adopted in Hong Kong may be developed for implementation in other regions or countries for international comparisons.     

Electrostatic charges during liquid leakage

Leakage accidents of pressurized flammable liquids often occur in chemical plants. To investigate electrostatic hazards due to liquid leakage, the amounts of electrostatic charge during the leakage were observed. The electric field of the clouds generated by liquid leakage was also examined. Various types of pipeline have been designed in consideration of potential leakage that might lead to accidents during industrial processes. Leakage pressure in the range of 0.1–0.3 MPa was used. With regard to the materials, water and kerosene were used. The results obtained from the experiments show that electrostatic charges depend on leakage parameters, such as the type of liquid, the gasket material between flanges, and the pipeline pressure. In all tests, the amount of the electrostatic charges of water, 0.12–0.83 μC/kg, was larger than that of kerosene, ?0.04 to 0.16 μC/kg. The maximum value of the electric field, generated from the leakage liquid in this study, 40.9 v/cm, is a safe level. No incendiary electrostatic sparks, such as brush and/or spark discharges, were detected in our tests.     

Experimental study on electrostatic charging of polymer powders in mixing processes

Powder mixing is often carried out in the chemical and pharmaceutical industries. Electrostatic charges generated on polymer powders during mixing may lead to electrostatic problems due to the poor conductivity of those powders. In this study, we investigated the electrostatic charges, surface potential, and apparent volume resistivity of sample powders using a simple mixing device utilizing the Faraday cup method. To neutralize the charged powders, we also applied an AC-type ionizer in the mixing study. A commercial polyethylene powder with a mean particle size of 585 μm was tested in this experiment. The charge-to-mass ratios at the end of 600 s of mixing were ?0.075 nC/g at 295 rpm agitation speed, ?0.21 nC/g at 495 rpm, and ?0.31 nC/g at 660 rpm, high enough to cause electrostatic agglomeration and adhesion. The electric fields based on the surface potential on the powders were several hundreds of V/cm, too small to give rise to brush discharge. The apparent volume resistivity of powders estimated by a simple measurement system is 1.0 × 10¹⁶ Ωm, in reasonable agreement with that acquired by the conventional test cell method (5.9 × 10¹⁵ Ωm). The charging level on the polymer powders was reduced with an AC-ionizer.     

Conflict,justice, and inequality: Why perceptions of leader–member exchange differentiation hurt performance in teams

To better understand why leader–member exchange (LMX) differentiation in teams may be detrimental to individual and team performance, we propose that team members' perception of LMX differentiation (PLMXD) is more important than statistical measures of LMX differentiation. Specifically, we hypothesize a multilevel model in which relationship conflict and procedural justice (climate) mediate the relationships of individual and collective PLMXDs with individual and team performance, respectively. Using a sample of 235 individuals in 53 teams, we found that individual PLMXD was negatively related to individual performance through relationship conflict perceptions, controlling for LMX. At the team level, collective PLMXD was negatively related to team performance through procedural justice climate and relationship conflict, controlling for a statistical measure of LMXD. Theoretical implications and directions for future research are explored.     

Understanding the contributions of anthropogenic and biogenic sources to CO enhancements and outflow observed over North America and the western Atlantic Ocean by TES and MOPITT

We investigate the effects of anthropogenic and biogenic sources on tropospheric CO enhancements and outflow over North America and the Atlantic during July–August 2006, the 3rd warmest summer on record. The analysis is performed using the 3D Regional chEmical trAnsport Model (REAM), satellite data from TES on the Aura satellite, MOPITT on the Terra satellite and surface monitor data from the SEARCH network. The satellite measurements of CO provide insight into the location of regional CO enhancements along with the ability to resolve vertical features. Satellite and surface monitor data are used to compare with REAM, illustrating model's ability to reproduce observed CO concentrations. The REAM model used in this study features CO emissions reduced by 50% from the 1999 EPA NEI and biogenic VOC emissions scaled by EPA-observed isoprene concentrations (20% reduction). The REAM simulations show large variations in surface CO, lower tropospheric CO and column CO, which are also observed by the surface observations and satellite data. Over the US, during July–August 2006, the model estimates monthly CO production from anthropogenic sources (5.3 and 5.1 Tg CO) is generally larger than biogenic sources (4.3 and 3.5 Tg CO). However, the model shows that for very warm days, biogenic sources produce as much CO as anthropogenic sources, a result of increased biogenic production due to warmer temperatures. The satellite data show CO outflow occurs along the East Coast of the US and Canada in July and is more broadly distributed over the Atlantic in August. REAM results show the longitudinally exported CO enhancements from anthropogenic sources (3.3 and 3.9 Tg CO) are larger than biogenic sources (2.8 and 2.7 Tg CO) along the eastern boundary of REAM for July–August 2006. We show that when compared with the impacts of both sources on increasing tropospheric CO exports, the relative impacts in August are greater than in July because of preferable outflow transport.