大连市夏季人体舒适度评价研究

以大连市1984年－2013年逐年7、8月的日平均温度、相对湿度及平均风速等气象数据为基础,基于模糊综合评价法,对大连市夏季人体舒适度现状进行分析与评价,得到结论如下：用模糊综合评判大连市气候舒适度最适合的评判标准为气温22℃、相对湿度70％和风速2 m／s;大连市总体气候舒适状况良好,夏季相对最舒适的时间段为第6旬（8月20日～8月31日）,最不舒适的时间段为第4旬（8月1日～8月10日）;由于大连市夏季经常伴有雷阵雨甚至暴雨天气以及湿度大等原因,使得炎热气温所造成的不舒适的天气状况常能得到改善,因此大连市夏季舒适程度所占比例较大。     

生物接触氧化+植物一体化装置处理小城镇污水试验研究

利用“生物接触氧化+植物”一体化装置处理城镇污水,试验最终选用悬浮多面球作填料,采用射流曝气,控制进水流量为0.45 m3/h,进水浓度为COD 63～467 mg/L、NH3-N 11.21～52.7 mg/L、TN 28.6 ～63.5mg/L和TP １.1～6.42 mg/L时,COD、NH3-N、TN和TP的去除率分别达到88％、86％、70％、60％以上,出水COD≤30 mg/L,NH3-N≤5 mg/L、TN≤13 mg/L、TP≤0.5 mg/L.水质优于《城镇污水处理厂污染物排放标准》(GB 18918-2002)一级A标准,具有较好的工程应用前景.     

Kinetic study of phytotoxicity induced by foliar lead uptake for vegetables exposed to fine particles and implications for sustainable urban agriculture

At the global scale, foliar metal transfer occurs for consumed vegetables cultivated in numerous urban or industrial areas with a polluted atmosphere. However, the kinetics of metal uptake, translocation and involved phytotoxicity was never jointly studied with vegetables exposed to micronic and sub-micronic particles (PM). Different leafy vegetables (lettuces and cabbages) cultivated in RHIZOtest® devices were, therefore, exposed in a greenhouse for 5, 10 and 15 days to various PbO PM doses. The kinetics of transfer and phytotoxicity was assessed in relation to lead concentration and exposure duration. A significant Pb accumulation in leaves (up to 7392 mg/kg dry weight (DW) in lettuce) with translocation to roots was observed. Lead foliar exposure resulted in significant phytotoxicity, lipid composition change, a decrease of plant shoot growth (up to 68.2% in lettuce) and net photosynthesis (up to 58% in lettuce). The phytotoxicity results indicated plant adaptation to Pb and a higher sensitivity of lettuce in comparison with cabbage. Air quality needs, therefore, to be considered for the health and quality of vegetables grown in polluted areas, such as certain megacities (in China, Pakistan, Europe, etc.) and furthermore, to assess the health risks associated with their consumption.     

Feedforward control for nitrogen removal in a pilot-scale anaerobic-anoxic-oxic plant for municipal wastewater treatment

To improve the efficiency of nitrogen removal with lower energy consumption, the study of feedforward control was carried out on a pilot-scale anaerobic-anoxicoxic (AAO) plant for the treatment of municipal wastewater. The effluent qualities of the pilot plant under different control strategies were investigated. The results indicated that the change of external recycle was not a suitable approach to regulate the sludge concentration of plug-flow reactors; adjusting the aeration valve and dissolved oxygen set-point according to ammonia load could overcome the impact of influent fluctuation; and the denitrification potential could be estimated based on the transit time of anoxic zone and the relative content of carbon resource entering the anoxic zone. Simple feedforward control strategies for aeration and internal recycle were subsequently proposed and validated. The nitrogen removal was successfully improved in the pilot plant. The effluent total nitrogen had decreased by 29.9% and was steadily controlled below 15 mg·L⁻¹. Furthermore, approximately 38% of the energy for aeration had been saved.     

巴氏醋酸杆菌发酵处理甲醇废水合成细菌纤维素的研究

介绍了巴氏醋酸杆菌以甲醇为唯一碳源、以酵母膏或蛋白胨为氮源合成细菌纤维素,同时净化甲醇废水的方法,并对合成细菌纤维素的培养条件进行了研究。试验得出巴氏醋酸杆菌的适宜发酵条件为：发酵培养基中甲醇质量分数为3．5％左右,发酵培养基初始pH为5．0～6．0。接种量为5％,发酵培养温度为30℃,振荡器转速为100r／min。     

临界区甲醇的聚碳酸酯降解研究

在间歇高压反应器中研究了聚碳酸酯在甲醇临界区域的降解行为 .降解无需借助催化剂 ,降解温度 2 2 0— 2 6 0℃ ,压力5 2 0— 8 6 7MPa ,时间 5— 4 5min ,通过GC MS与GC FID对液相产物进行了定性和定量分析 ,聚碳酸酯醇解主要产物为碳酸二甲酯 (DMC)和双酚A(BPA) .降解温度和时间为 2 4 0℃和 30min时 ,DMC和BPA的产率分别 91 75 %和 90 0 3% .通过凝胶渗透色谱 (GPC)对 2 4 0℃醇解反应的固相聚合物进行了分析 .降解初期 ,聚合物大分子发生断裂 ,PC的数均分子量 (Mn)迅速下降 ,仅有少量DMC和BPA生成 ;降解的中间阶段 ,低聚物在降解产物中的比例快速增加 ,同时DMC与BPA相应增多 ,最终PC被完全分解 .     

A pyrazine based metal-organic framework for selective removal of copper from strongly acidic solutions

● pz-UiO-66 was synthesized facilely by a solvothermal method. ● Efficient capture of copper from highly acidic solution was achieved by pz-UiO-66. ● pz-UiO-66 exhibited excellent selectivity and capacity for copper capture. ● Pyrazine-N in pz-UiO-66 was shown to be the dominant adsorption site. The selective capture of copper from strongly acidic solutions is of vital importance from the perspective of sustainable development and environmental protection. Metal organic frameworks (MOFs) have attracted the interest of many scholars for adsorption due to their fascinating physicochemical characteristics, including adjustable structure, strong stability and porosity. Herein, pz-UiO-66 containing a pyrazine structure is successfully synthesized for the efficient separation of copper from strongly acidic conditions. Selective copper removal at low pH values is accomplished by using this material that is not available in previously reported metal–organic frameworks. Furthermore, the material exhibits excellent adsorption capacity, with a theoretical maximum copper uptake of 247 mg/g. As proven by XPS and FT-IR analysis, the coordination of pyrazine nitrogen atoms with copper ions is the dominant adsorption mechanism of copper by pz-UiO-66. This work provides an opportunity for efficient and selective copper removal under strongly acidic conditions, and promises extensive application prospects for the removal of copper in the treatment for acid metallurgical wastewater.     

水上交通事故分析研究进展

为更好地开展水上交通事故分析研究,提高我国水上交通安全水平,从船舶风险评估与事故预测、事故分析以及事故及通航安全数据的组织与数据库建立3个方面对国内外的相关研究进行论述和分析。提出以建立水上交通事故时空数据平台为基础,结合数据挖掘和安全工程的理论方法研究事故发生机理,评估事故风险,并将研究事故模拟再现技术作为事故分析的重要技术手段。     

镇江市雨水径流水质分析与旋流分离处理技术试验研究

水力旋流器在暴雨径流污染控制中的应用是一项新技术。通过分析镇江市城市暴雨径流,发现城市地表降雨径流污染物浓度较高,COD与SS之间存在较好的相关性,控制SS可以有效减少COD的排放量。通过实验室模拟降雨初期雨水,并利用水力旋流器去除其固态污染物,实验结果表明去除率均在70%以上,可有效地控制暴雨径流中的污染物。     

Variations in the coral community at the high-latitude Bailong Peninsula,northern South China Sea

Environmental Science and Pollution Research - High-latitude coral communities have attracted much attention due to their potential as refuges during global climate change. However, this function...