Mercury flows in a zinc smelting facility in South Korea

To prepare for the international mercury convention, the characteristics of mercury emissions from a zinc smelting facility in South Korea have been reviewed and a material flow analysis (MFA) has been conducted in this research. As inputs into the mercury MFA study, zinc ores and sulfuric acid were examined, whereas wastewater sludge, effluence water, spent catalyst, and emissions from the casting and roasting processes were examined as outputs. Mercury concentrations extracted from end products like zinc ingots, cadmium ingots, and sulfuric acid were then analyzed. Our results showed that the wastewater sludge discharged from the zinc smelting process had a relatively higher concentration of mercury, indicating that the concentration of mercury was further enriched in the wastewater sludge. The wastes discharged through the zinc smelting process should be thoroughly controlled, as results of the MFA showed that approximately 89 % of the mercury contained in the original input was later found in the waste. According to this study, the higher the concentration of mercury within zinc ores at the input stage, the higher is the mercury concentration found in the wastewater sludge at the output stage.     

Quality control for coal combustion products in South Korea through assessed pozzolanic-activity index with long-term property tests

In South Korea, nine million tons of fly ash (FA) are annually produced and approximately 70 % is reutilized for industrial demand. For the prompt reuse and insufficient reclamation site, quality control of FA which is main productive construction material from coal ash is very important. Assessed Pozzolanic-activity Index (API) test which needs only 2 days for evaluation of pozzolanic reaction is currently considered as an alternative of activity index measurement. This paper aims for an applicability of API test for prompt quality control and investigation of domestic FA properties. For the work, FAs from two different power plant types are prepared, and quality tests are carried out based on Korean Standards (KS) methods and API method. Lots of test results are compared with those from API and K-value test for FA with age of 7 days–1 year. From the test results for FA aged 1 year, API results are evaluated to be closely related with those from activity index and K-value, and the correlations are improved with increasing ages regardless of plant types. The applicability of API test is verified and the reduced period of FA quality evaluation can accelerate prompt use and the related process of FA.     

Utility estimates of job performance as related to the Data,People, and Things parameters of work

The purpose of this study was to investigate the applicability of the Schmidt–Hunter global estimation method of assessing utility across a broad range of jobs. Ninety-five industrial/organizational psychologists estimated the utility of performance in 24 carefully selected jobs. The utility estimates were compared to the Data, People, and Things worker function parameters from the Dictionary of Occupational Titles. The majority of jobs (62.5 per cent) produced significantly positively skewed distributions of dollar-valued job performance. The Data, People, and Things parameters accounted for 46 per cent of the variance in the non-symmetry of the utility distributions and 33 per cent of the variance in the inter-rater reliability of the utility estimates. The implications of the results were discussed for utility assessment, and explained from a decision theoretic perspective. © 1998 John Wiley & Sons, Ltd.     

Absorption characteristics of potassium carbonate-based solutions with rate promoters and corrosion inhibitors

In this research, absorbents for CO₂ capture were prepared by blending 30 wt% potassium carbonate, 3 wt% of a rate promoter, and 1 wt% of a corrosion inhibitor. Pipecolic acid, sarcosine, and diethanolamine were chosen as rate promoter candidates. Based on a rate promoter screening test for CO₂ loading capacity and absorption rate, pipecolic acid and sarcosine were selected to be used as rate promoters. 1,2,3-benzotriazole and ammonium thiocyanate were chosen as corrosion inhibitors, and they were mixed with a 30 wt% potassium carbonate-based absorbent mixture containing one of the rate promoters. The absorption rates for four absorbent solutions (30 wt% potassium carbonate?+?3 wt% pipecolic acid?+?1 wt% 1,2,3-benzotriazole, 30 wt% potassium carbonate?+?3 wt% pipecolic acid?+?1 wt% ammonium thiocyanate, 30 wt% potassium carbonate?+?3 wt% sarcosine?+?1 wt% 1,2,3-benzotriazole, and 30 wt% potassium carbonate?+?3 wt% sarcosine?+?1 wt% ammonium thiocyanate) were measured, tabulated, and graphically displayed. These types of absorbents can be used for capturing CO₂ under high temperature and pressure conditions, such as those found in coal-fired power plants.     

Economic benefits of preventing bird collisions in South Korea: findings from a choice experiment survey

Bird deaths due to collisions with artificial structures, such as glass windows of buildings and transparent noise barriers, are continuing to occur in South Korea. The government is trying to prevent bird collisions by increasing the attachment of specially designed tapes to help birds avoid windows. This article estimates the economic benefits arising from the prevention of collisions by applying a choice experiment (CE). For this purpose, a CE survey of 1000 South Korean interviewees was conducted. The four attributes to be attached with the tapes for the CE application were a transparent soundproof wall window on an expressway, a transparent soundproof wall window on a general road, a glass window in a public building, and a glass window in a private building. The unit was the percentage of each structure with the tapes attached to the window. The marginal values of a one-unit (1%p) increase in each attribute were computed to be KRW 534 (USD 0.46), KRW 233 (USD 0.20), KRW 1,318 (USD 1.13), and KRW 12,930 (USD 11.05), respectively. This quantitative information will be an important reference for implementing the prevention policy. For example, based on the collision prevention of 1000 birds per structure, the priority for attaching tapes can be placed in the order of expressways, public buildings, private buildings, and general roads.

     

Effects of basic oxygen furnace slag and inorganic nutrients on the germination of resting cysts of two toxic dinoflagellates

Effects of basic oxygen furnace (BOF) slag, inorganic nutrients and H2S on the germination of resting cysts of two toxic dinoflagellates Alexandrium catenella/tamarense and Gymnodinium catenatum were studied in batch cultures. The germination rate of the test species has increased by 23-25%, when the concentration of NO3--N or H2S in culture medium has increased to 2.0 ppm. At the treatment of enriched NH4+-N and PO43--p, the germination of resting cyst was increased. Nevertheless, the increased range in germination rates was less than those of NO3--N and H2S. When BOF slag in culture medium increased to 50 mg/ml (or 500 g/m2), the cyst germination rate fell to less than 5%. At higher level of concentrations germination was completely inhibited. Adding BOF slag to the culture medium reduced the concentration of inorganic salts and H2S in seawater and sediments, resulting in the inhibition of cyst germination. These findings demonstrate the potential use of BOF slag on the sediments seed bank of red tide organism because it has an ability to inhibit resting cysts germination.     

Use of physical properties to predict the effects of tillage practices on organic matter dynamics in three Illinois soils

This work builds on a previous study of long-term tillage trials that found use of no-tillage (NT) practices increased soil organic carbon (SOC) sequestration at Monmouth, IL (silt loam soil) by increasing the soil's protective capacity, but did not alter SOC storage in DeKalb, IL (silty clay loam), where higher clay contents provided a protective capacity not affected by tillage. The least limiting water range (LLWR), a multi-factor index of structural quality, predicted observed soil CO2 efflux patterns. Here we consider whether LLWR can predict sequestration trends at a third site, Perry, IL (silt loam soil) where SOC content is lower and bulk density is higher than in previously considered sites, and determine whether pore size characteristics can help explain the influence use of NT practices has had on SOC sequestration at all three locations. At Perry, LLWR was again related with differences in specific soil organic carbon mineralization rates (RESPsp) (2000-2001). Reduced RESPsp rates explain increases in SOC storage under NT management observed only after 17 yr. Trends in RESPsp suggest use of NT practices only enhance physical protection of SOC where soil bulk density is relatively high (approximately 1.4 g cm(-3)). In those soils (Monmouth and Perry), use of NT management reduced the volume of small macropores (15-150 microm) thought to be important for microbial activity. Physical properties appear to determine whether or not use of NT practices will enhance C storage by increasing physical protection of SOC. By refining the functions used to compute the LLWR and our understanding of the interactions between management, pore structure, and SOC mineralization, we should be able to predict the influence of tillage practices on SOC sequestration.     

Present status of the recycling of waste electrical and electronic equipment in Korea

In Korea due to rapid economical growth followed by urbanisation, breakage of large traditional families into small nuclear families, continuous changes in equipment features and capabilities causes tremendous increase in sale of new electrical and electronic equipment (EEE) and decrease in sale of used EEE. Subsequently, the ever-increasing quantity of waste electrical and electronic equipment (WEEE) has become a serious social problem and threat to the environment. Therefore, the gradual increase in the generation of WEEE intensifies the interest for recycling to conserve the resources and protect the environment. In view of the above, a review has been made related to the present status of the recycling of waste electrical and electronic equipment in Korea. This paper describes the present status of generation and recycling of waste electrical and electronic equipment, namely TVs, refrigerators, washing machines, air conditioners, personal computers and mobile phones in Korea. The commercial processes and the status of developing new technologies for the recycling of metallic values from waste printed circuit boards (PCBs) is also described briefly. Since 1998, three recycling centers are in full operation to recycle WEEE such as refrigerators, washing machines and air conditioners, having the total capacity of 880,000 units/year. All waste TVs are recently recycled on commission basis by several private recycling plants. The recycling of waste personal computers and mobile phones is insignificant in comparison with the amount of estimated obsolete those. Korea has adopted and enforced the extended producer responsibility (EPR) system. Korea is making consistent efforts to improve the recycling rate to the standards indicated in the EU directives for WEEE. Especially environmentally friendly and energy-saving technologies are being developed to recycle metal values from PCBs of WEEE.     

Morphological variation of dinoflagellate Prorocentrum lima (Ehrenberg) Dodge with geographical difference

Prorocentrum lima (Ehrenberg) Dodge, one of the cosmopolitan dinoflagellates, is basically benthic and is found on the surface of macroalgae and detritus. The identification of this species requires detailed morphological observation because of its close similarity to other benthic Prorocentrum species. The purpose of this study is to detect the morphological variability of P. lima using culture clones collected from several areas to find an adequate way of subdividing the species. In this study, 33 clones of P. lima were collected from Saipan, Tahiti, Indonesia, Japan and Bermuda, and their thecal valves and periflagellar area were observed by means of light microscopy with differential interference contrast optics and scanning electron microscopy. In general cells have two centrally located pyrenoids and a posterior nucleus. The surface of both valves has many valve pores except the center. Evenly spaced marginal pores are located along the edge of the valves. P. lima samples studied herein were subdivided into four major types (ellipsoidal, general, short, and elongate ovoid) according to their shapes, length-to-width ratio and number of valve pores. The length-to-width ratios of ellipsoidal, general, short, and elongate ovoid types were 1.32, 1.33-1.43, 1.20-1.27, and 1.53-1.60 microm respectively. Also there were slight differences in the number of valve pores. The number of valve pores examined in this study ranges from 40 to 97: ellipsoidal, general, and short ovoid types range from 40 to 91, while an elongate ovoid type ranges from 80 to 97. The combination of valve shape, number of valve pores and length-to-width ratio provides useful information on the morphological variation of P. lima.     

Applying Multi-attribute Utility Theory to Decision Making in Environmental Planning: A Case Study of the Electric Utility in Korea

This paper applies the multi-attribute utility theory (MAUT) to obtaining value judgments concerning the significance of environmental impacts to achieve integration of environmental concerns at an early stage of planning, using the electric utility of Korea as a specific case study. An environmental multi-attribute index is constructed as a multi-attribute utility function, based on value judgments provided by a group of experts related to electric utility and a decision maker from Korea Electric Power Corporation (KEPCO). The societal values are derived from examining trade-offs between environmentalindex and money. The implications of the results for KEPCO are also discussed. We found that the work and results can provide valuable insights and decision opportunities for major decision making in environmental planning facing KEPCO.