Development of functional composts using spent coffee grounds,poultry manure and biochar through microbial bioaugmentation

Spent coffee grounds (SCG), poultry manure, and agricultural waste-derived biochar were used to manufacture functional composts through microbial bioaugmentation. The highest yield of tomato stalk-based biochar (40.7%) was obtained at 450°C with a surface area of 2.35 m² g^?1. Four pilot-scale composting reactors were established to perform composting for 45 days. The ratios of NH₄⁺–N/NO₃^?–N, which served as an indicator of compost maturity, indicate rapid, and successful composting via microbial bioaugmentation and biochar amendment. Moreover, germination indices for radish also increased by 14–34% through augmentation and biochar amendment. Microbial diversity was also enhanced in the augmented and biochar-amended composts by 7.1–8.9%, where two species of Sphingobacteriaceae were dominant (29–43%). The scavenging activities of 2,2-diphenyl-1-picrylhydrazyl (DPPH) were enhanced by 14.1% and 8.6% in the fruits of pepper plants grown in the presence of the TR-2 (augmentation applied only) and TR-3 (both augmentation and biochar amendment applied) composts, respectively. Total phenolic content was also enhanced by 68% in the fruits of the crops grown in TR-3. Moreover, the other compost, TR-L (augmentation applied only), boosted DPPH scavenging activity by 111% in leeks compared with commercial organic fertilizer, while TR-3 increased the phenolic content by 44.8%. Composting facilitated by microbial augmentation and biochar amendment shortened the composting time and enhanced the quality of the functional compost. These results indicate that functional compost has great potential to compete with commercially available organic fertilizers and that the novel composting technology could significantly contribute to the eco-friendly recycling of organic wastes such as spent coffee grounds, poultry manure, and agricultural wastes.     

A comparison study of the potential risks induced in arable land and forest soils by carcass-derived pollutants

Environmental Geochemistry and Health - Improper decisions concerning animal carcass disposal sites pose grave threats to environmental biosecurity. However, only a few studies have focused on the...     

Use of sodium transfer tissue biosensor (STTB) for monitoring of marine toxic organism

A highly sensitive sodium (Na+) transfer tissue biosensor (STTB) was designed using a frog bladder membrane to measure paralytic shellfish poisons (PSP). The STTB consists, of a Na+ electrode covered by the membrane, which was then integrated into a flow-through system for continuous measurements. In the absence of Na+ channel blocker, active transfer of Na+ occurred from inside to outside across the frog membrane. When the STTB was used to measure the Na+ -dependent dissociation of PSP, it was able to detect PSB at a level contained in a single cell. However, 5 fg or higher (100 cells or more) is needed for accurate and reproducible measurements. The toxicity obtained by the STTB was significantly correlated (r = 0.9449) to that determined by the HPLC. Therefore, the simple method of the STTB can be used not only to detect a low level PSP in toxic plankton populations, but also to monitor poisons in shellfish.     

Simulating urban-scale air pollutants and their predicting capabilities over the Seoul metropolitan area

Urban-scale air pollutants for sulfur dioxide, nitrogen dioxide, particulate matter with aerodynamic diameter > or = 10 microm, and ozone (O3) were simulated over the Seoul metropolitan area, Korea, during the period of July 2-11, 2002, and their predicting capabilities were discussed. The Air Pollution Model (TAPM) and the highly disaggregated anthropogenic and the biogenic gridded emissions (1 km x 1 km) recently prepared by the Korean Ministry of Environment were applied. Wind fields with observational nudging in the prognostic meteorological model TAPM are optionally adopted to comparatively examine the meteorological impact on the prediction capabilities of urban-scale air pollutants. The result shows that the simulated concentrations of secondary air pollutant largely agree with observed levels with an index of agreement (IOA) of >0.6, whereas IOAs of approximately 0.4 are found for most primary pollutants in the major cities, reflecting the quality of emission data in the urban area. The observationally nudged wind fields with higher IOAs have little effect on the prediction for both primary and secondary air pollutants, implying that the detailed wind field does not consistently improve the urban air pollution model performance if emissions are not well specified. However, the robust highest concentrations are better described toward observations by imposing observational nudging, suggesting the importance of wind fields for the predictions of extreme concentrations such as robust highest concentrations, maximum levels, and >90th percentiles of concentrations for both primary and secondary urban-scale air pollutants.     

Tracing lead pollution sources in abandoned mine areas using stable Pb isotope ratios

This study focused on Pb isotope ratios of sediments in areas around an abandoned mine to determine if the ratios can be used as a source tracer. For pretreatment, sediment samples were dissolved with mixed acids, and a multi-collector inductively coupled plasma mass spectrometer (MC-ICP-MS, Nu plasma II) was used to investigate the Pb isotopic composition of the samples. The measured isotope ratios were then corrected for instrumental mass fractionation by measuring the ²⁰³Tl/²⁰⁵Tl ratio. Repeated measurements with the NIST SRM 981 reference material showed that the precision of all ratios was below 104 ppm (±2σ) for 50 ng/g. The isotope ratios (²⁰⁷Pb/²⁰⁶Pb) found were 0.85073?±?0.0004~0.85373?±?0.0003 for the main stream, while they were 0.83736?±?0.0010 for the tributary and 0.84393?±?0.0002 for the confluence. A binary mixing equation for isotope ratios showed that the contributions of mine lead to neighboring areas were up to 60 %. Therefore, Pb isotope ratios can be a good source tracer for areas around abandoned mines.     

Effects of biochar addition on greenhouse gas emissions and microbial responses in a short-term laboratory experiment

Biochar application to soil has drawn much attention as a strategy to sequester atmospheric carbon in soil ecosystems. The applicability of this strategy as a climate change mitigation option is limited by our understanding of the mechanisms responsible for the observed changes in greenhouse gas emissions from soils, microbial responses, and soil fertility changes. We conducted an 8-wk laboratory incubation using soils from PASTURE (silt loam) and RICE PADDY (silt loam) sites with and without two types of biochar (biochar from swine manure [CHAR-M] and from barley stover [CHAR-B]). Responses to addition of the different biochars varied with the soil source. Addition of CHAR-B did not change CO and CH evolution from the PASTURE or the RICE PADDY soils, but there was a decrease in NO emissions from the PASTURE soil. The effects of CHAR-M addition on greenhouse gas emissions were different for the soils. The most substantial change was an increase in NO emissions from the RICE PADDY soil. This result was attributed to a combination of abundant denitrifiers in this soil and increased net nitrogen mineralization. Soil phosphatase and N-acetylglucosaminidase activity in the CHAR-B-treated soils was enhanced compared with the controls for both soils. Fungal biomass was higher in the CHAR-B-treated RICE PADDY soil. From our results, we suggest CHAR-B to be an appropriate amendment for the PASTURE and RICE PADDY soils because it provides increased nitrogen availability and microbial activity with no net increase in greenhouse gas emissions. Application of CHAR-M to RICE PADDY soils could result in excess nitrogen availability, which may increase NO emissions and possible NO leaching problems. Thus, this study confirms that the ability of environmentally sound biochar additions to sequester carbon in soils depends on the characteristics of the receiving soil as well as the nature of the biochar.     

A real-time monitoring and assessment method for calculation of total amounts of indoor air pollutants emitted in subway stations

Subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, in this study, a new cumulative calculation method for the estimation of total amounts of indoor air pollutants emitted inside the subway station is proposed by taking cumulative amounts of indoor air pollutants based on integration concept. Minimum concentration of individual air pollutants which naturally exist in indoor space is referred as base concentration of air pollutants and can be found from the data collected. After subtracting the value of base concentration from data point of each data set of indoor air pollutant, the primary quantity of emitted air pollutant is calculated. After integration is carried out with these values, adding the base concentration to the integration quantity gives the total amount of indoor air pollutant emitted. Moreover the values of new index for cumulative indoor air quality obtained for 1 day are calculated using the values of cumulative air quality index (CAI). Cumulative comprehensive indoor air quality index (CCIAI) is also proposed to compare the values of cumulative concentrations of indoor air pollutants. From the results, it is clear that the cumulative assessment approach of indoor air quality (IAQ) is useful for monitoring the values of total amounts of indoor air pollutants emitted, in case of exposure to indoor air pollutants for a long time. Also, the values of CCIAI are influenced more by the values of concentration of NO2, which is released due to the use of air conditioners and combustion of the fuel. The results obtained in this study confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well. Implications: Nowadays, subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in the indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, this paper presents a new methodology for monitoring and assessing total amounts of indoor air pollutants emitted inside underground spaces and subway stations. A new methodology for the calculation of cumulative amounts of indoor air pollutants based on integration concept is proposed. The results suggest that the cumulative assessment approach of IAQ is useful for monitoring the values of total amounts of indoor air pollutants, if indoor air pollutants accumulated for a long time, especially NO2 pollutants. The results obtained here confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well.