Characteristics of cesium accumulation in the filamentous soil bacterium Streptomyces sp. K202

A filamentous soil bacterium, strain K202, was isolated from soil where an edible mushroom (Boletopsis leucomelas) was growing and identified as belonging to the genus Streptomyces on the basis of its morphological characteristics and the presence of LL-2, 6-diaminopimelic acid. We studied the existence states of Cs and its migration from extracellular to intracellular fluid in the mycelia of Streptomyces sp. K202. The results indicated that Cs accumulated in the cells through at least 2 steps: in the first step, Cs⁺ was immediately and non-specifically adsorbed on the negatively charged cell surface, and in the second step, this adsorbed Cs⁺ was taken up into the cytoplasm, and a part of the Cs entering the cytoplasm was taken up by an energy-dependent transport system(s). Further, we confirmed that a part of the Cs⁺ was taken up into the mycelia competitively with K⁺, because K⁺ uptake into the intact mycelia of the strain was significantly inhibited by the presence of Cs⁺ in the culture media. This suggested that part of the Cs is transported by the potassium transport system. Moreover, ¹³³Cs-NMR spectra and SEM-EDX spectra of the mycelia that accumulated Cs showed the presence of at least 2 intracellular Cs states: Cs⁺ trapped by intercellular materials such as polyphosphate and Cs⁺ present in a cytoplasmic pool.     

Development of enzyme immunoassay for detection of DDT

Dichlorodiphenyltrichloroethane (DDT) is one of the persistent organic pollutants (POPs) widely found in the environment and in the general population. In this study, a direct competitive enzyme immunoassay (EIA) has been developed for the quantitative analysis of DDT. To generate a specific polyclonal antibody for EIA, p, p'-DDT was conjugated to porcine thyroglobulin for rabbit immunization. At optimized EIA conditions, the standard curves ranged from 0.137 to 100 ng/mL with the quantification limit of 0.41 ng/mL. The coefficients of variation (CV%) were 5.42-10.53% for intra-assay and 6.04-7.26% for inter-assay. Cross-reactivities with DDT metabolites (DDTs, including o, p'-DDT, p, p'-DDD, o, p'-DDD, p, p'-DDE, o, p'-DDE, p, p'-dichlorobenzophenone (DCBP), o, p'-DCBP) were investigated. The polyclonal antibody showed relatively low and/or no cross-reactivity with these compounds, and the assay was seen to be highly selective for p, p'-DDT. Moreover, the DDTs could be ranked by their reactivity: DDT > DDD > DDE > DCBP. In addition, the characterization of the polyclonal antibody indicated that the antiserum possesses a high specificity for p, p'-isomers. The results indicated that the developed EIA using this antibody could be a convenient and supplemental analytical tool for monitoring DDT.     

Preparation of Chitin/Cellulose Films Compatibilized with Polymeric Ionic Liquids

This paper reports the preparation of chitin/cellulose films compatibilized with polymeric ionic liquids. In-situ (co)polymerization of polymerizable ionic liquids, 1-(3-methacryloyloxypropyl)-3-vinylimidazolium bromide (1) and 1-methyl-3-vinylbenzylimidazolium chloride (3), was carried out in the presence of a radical initiator, AIBN, in the chitin/cellulose solution with ionic liquid solvents (1-butyl-3-methylimidazolium acetate and chloride, BMIMOAc and BMIMCl, respectively), followed by the appropriate procedure to give the desired films. The presence of the polymeric ionic liquid in the film was confirmed by the IR measurement. The powder X-ray diffraction analysis suggested that crystalline structures of the polysaccharides were largely disrupted in the film, as same as that of a chitin/cellulose film prepared by the AMIMOAc/BMIMCl system. These results were different from the XRD result of a chitin/cellulose film prepared by the 1-allyl-3-methylimidazolium bromide/BMIMCl system reported in our previous study, in which some crystalline structures were still remained in the film. Furthermore, the mechanical properties of the present films were evaluated by tensile testing, which were affected by the molar ratios of the polymeric ionic liquids to the polysaccharides and the compositional ratios of the two units 1 and 3.     

Development of enzyme immunoassay for detection of DDT

Dichlorodiphenyltrichloroethane (DDT) is one of the persistent organic pollutants (POPs) widely found in the environment and in the general population. In this study, a direct competitive enzyme immunoassay (EIA) has been developed for the quantitative analysis of DDT. To generate a specific polyclonal antibody for EIA, p, p′-DDT was conjugated to porcine thyroglobulin for rabbit immunization. At optimized EIA conditions, the standard curves ranged from 0.137 to 100 ng/mL with the quantification limit of 0.41 ng/mL. The coefficients of variation (CV%) were 5.42–10.53% for intra-assay and 6.04–7.26% for inter-assay. Cross-reactivities with DDT metabolites (DDTs, including o, p′-DDT, p, p′-DDD, o, p′-DDD, p, p′-DDE, o, p′-DDE, p, p′-dichlorobenzophenone (DCBP), o, p′-DCBP) were investigated. The polyclonal antibody showed relatively low and/or no cross-reactivity with these compounds, and the assay was seen to be highly selective for p, p′-DDT. Moreover, the DDTs could be ranked by their reactivity: DDT > DDD > DDE > DCBP. In addition, the characterization of the polyclonal antibody indicated that the antiserum possesses a high specificity for p, p′-isomers. The results indicated that the developed EIA using this antibody could be a convenient and supplemental analytical tool for monitoring DDT.     

Exposure to carbonyl compounds in charcoal production plants in Bahia, Brazil

Studies have investigated the exposure levels of carbonyl compounds (CC) in the indoor and outdoor air of homes, vehicles, workplaces, urban and industrial areas, and rural sites. However, an investigation of these emissions and occupational exposure to CC in charcoal production facilities has not been previously conducted. The objective of this study was to measure the atmospheric concentrations of several CC to assess the exposure of workers of two charcoal plants located north of Salvador, Bahia, Brazil. Stationary and personal samples were collected using Sep-Pak® C18 cartridges that were coated with a 0.2 % acidic solution of 2,4-dinitrophenylhydrazine. The quantification of the resulting 2,4-dinitrophenylhydrazone derivatives was conducted using a high-performance liquid chromatography system with UV detection. In the personal samples, the concentrations of formaldehyde, acetaldehyde, propanone, furfural, and C4 isomers (n-butanal-isobutanal-butanone) ranged from 12 to 139, 38 to 165, 136 to 483, 39 to 114, and 63 to 132 μg?m^?3, respectively. In the stationary samples, the concentrations of these CC ranged from 20 to 160, 111 to 284, 328 to 644, 70 to 163, and 100 to 176 μg?m^?3, respectively. When compared to the occupational exposure limits for 8 h, the concentrations of formaldehyde were often greater than the levels recommended by the American National Institute for Occupational Safety and Health, which indicates a health risk for charcoal workers. These results are the first reported concerning the occupational exposure to CC in charcoal plants.     

Regional and seasonal characteristics of emission sources of fine airborne particulate matter collected in the center and suburbs of Tokyo, Japan as determined by multielement analysis and source receptor models

Airborne particulate matter, suspected to induce adverse effects on human health, have been one of the most important concerns regarding recent air pollution issues in Japan. To characterize regional and seasonal variations in emission sources of fine airborne particulate matter (d < 2 microm), monthly samples (n = 36 for each site) were collected at urban (Tokyo), suburban (Maebashi), and mountainous (Akagi) sites in Japan from April 2003 to March 2006. Multielement analysis of chemical species (Na, Al, K, Ca, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Sb, and Pb) was performed by inductively coupled plasma-atomic emission spectrometry and inductively coupled plasma-mass spectrometry. The combined source receptor model, which consists of positive matrix factorization and chemical mass balance, determined the contributions of nine emission sources (local and continental soils, road dust, coal and oil combustion, waste incineration, steel industry, brake wear, and diesel exhaust) to the observed elemental concentrations. Large regional differences were identified in the source contributions among the observational sites. Diesel exhaust was identified as the most significant source (70% of identified contributions) at the urban site. Local and continental soils, coal combustion, and diesel exhaust were intricately assigned (20-30% each) to the suburban site. Continental soil was the predominant source (65%) at the mountainous site. Respective significant source contributions dominated the seasonal variations of total elemental concentrations at each site. These results suggest that a better understanding of the regional and seasonal characteristics of impacting emission sources will be important for improving regional environments.     

Production of cement clinkers from municipal solid waste incineration (MSWI) fly ash

This communication reports the laboratory scale study on the production of cement clinkers from two types of municipal solid waste incineration fly ash (MSW ash) samples. XRD technique was used to monitor the phase formation during the burning of the raw mixes. The amount of trace elements volatilized during clinkerization and hydration, as well as leaching behaviours of the clinkers obtained from optimum compositions, were also evaluated. From the results it is observed that all of the major components of ordinary Portland cement (OPC) clinkers are present in the produced clinkers. Results also show the volatilization of considerable amounts of Na, K, Pb, Zn and Cd during the production of clinkers. However, major parts of the toxic elements remaining in the clinkers appear to be immobilized in the clinkers phases. Hydration studies of the clinkers obtained from optimum compositions show that the clinkers prepared from raw MSW ash are more reactive than the washed MSW ash based clinkers. TG/DTA analyses of the hydrated pastes show the formation of hydration products, which are generally found in OPC and OPC derived cements. The initial study, therefore, shows that more than 44% of MSW ash with the addition of very small amounts of silica and iron oxide can be used to produce cement clinkers. The amount of CaCO3 necessary to produce clinkers (approximately 50%) is also smaller than the same required for the conventional process (more than 70%).     

Waste generation in traditional organized bazaars: a case study of organic waste sources in Da Nang City,Viet Nam

Journal of Material Cycles and Waste Management - Traditional organized bazaars are important retail venues in Viet Nam, but there are concerns about their waste management programs. This study...     

Surface ozone and carbon monoxide levels observed at Oki, Japan: regional air pollution trends in East Asia

Simultaneous ground-based measurements of ozone and carbon monoxide were performed at Oki, Japan, from January 2001 to September 2002 in order to investigate the O(3) and CO characteristics and their distributions. The observations revealed that O(3) and CO concentrations were maximum in springtime and minimum in the summer. The monthly averaged concentrations of O(3) and CO were 60 and 234 ppb in spring and 23 and 106 ppb in summer, respectively. Based on direction, 5-day isentropic backward trajectory analysis was carried out to determine the transport path of air masses, preceding their arrival at Oki. Comparison between classified results from present work and results from the year 1994-1996 was carried out. The O(3) and CO concentration results of classified air masses in our analysis show similar concentration trends to previous findings; highest in the WNW/W, lowest in N/NE and medium levels in NW. Moreover, O(3) levels are higher and CO levels are lower in the present study in all categories.