Rehabilitation of El Yahoudia dumping site, Tunisia

As in all developing countries, cities in Tunisia face serious problems of environmental pollution caused mainly by the inadequate and inefficient final disposal of their generated solid wastes. The Tunisian government launched a development program including the construction of landfills in the main cities and the closure of the contaminated sites issued from solid wastes landrising practice. The project of the Henchir El Yahoudia landfill restoration is the first experience in this programme. It has been suggested to convert the site to a green park and to implement an ornamental plant nursery. The whole surface of the landfill is approximately 100 ha from which 30 ha have been already transformed to an urban recreational area and the remaining 70 ha have to be characterized for the project extension. A field investigation by boring was conducted in order to define the geological and the hydrogeological conditions, the vertical and horizontal wastes layer extension, content and degree of decomposition and the composition and quantities of leachate and landfill gas. Representative samples of waste, soil, groundwater and leachate were collected for laboratory analyses. Several of these borings were converted to piezometers to define the flow regime in the site. The results showed that the biogas (CH4, H2S, and CO2), leachate and waste, distribution in the site is mainly affected by the temporal variation of the site operating method. The underlying fissured clay layer facilitated leachate infiltration into the groundwater where high BOD, COD and nitrogen concentrations were registered.     

Characterisation of road sediments near Bordeaux with emphasis on phosphorus

Road sediments from the region of Bordeaux (France) were analysed for trace metals, hydrocarbons (including Polycyclic Aromatic Hydrocarbons, PAHs) and phosphorus. The aim of the study was to assess their potential risk for the environment. The sediments were collected by means of a sweeper. The particles are mostly sandy clay loam and silty clay loam with 5.6-8.3% CaO. Heavy metal concentrations are generally below the French and Dutch standards for polluted soils, but a few samples have higher concentrations, e.g., 547 mg kg(-1) for Zn, and 222 mg kg(-1) for Pb. PAH concentrations are above the Dutch target value for polluted soils, and could be a threat to the environment: pyrene (2600 microg kg(-1)) and fluoranthene (1400 microg kg(-1)) have the highest concentrations, whereas chrysene (340 microg kg(-1)) has the lowest. Consequently, these sediments must be considered as waste according to the French circular no 2001-39 from 18 June 2001 and cannot be disposed of anywhere. The Standards Measurements and Testing (SMT) protocol for sequential extraction of phosphorus in sediments was used to determine the forms of phosphorus in the samples. Total phosphorus concentration is 620 mg kg(-1) on average, with a maximum of 933 mg kg(-1); organic phosphorus content is low (36 mg kg(-1) on average). The protocol could be slightly amended, especially with regards to organic phosphorus at low concentrations and could then be used for the determination of phosphorus in other materials such as sludge from detention ponds.     

Statistical method for the determination of the ignition energy of dust cloud-experimental validation

Powdery materials such as metallic or polymer powders play a considerable role in many industrial processes. Their use requires the introduction of preventive safeguard to control the plants safety. The mitigation of an explosion hazard, according to the ATEX 137 Directive (1999/92/EU), requires, among other things, the assessment of the dust ignition sensitivity. PRISME laboratory (University of Orléans) has developed an experimental set-up and methodology, using the Langlie test, for the quick determination of the explosion sensitivity of dusts. This method requires only 20 shots and ignition sensitivity is evaluated through the E₅₀ (energy with an ignition probability of 0.5). A Hartmann tube, with a volume of 1.3 l, was designed and built. Many results on the energy ignition thresholds of partially oxidised aluminium were obtained using this experimental device (Baudry, 2007) and compared to literature. E₅₀ evolution is the same as MIE but their respective values are different and MIE is lower than E₅₀ however the link between E₅₀ and MIE has not been elucidated.In this paper, the Langlie method is explained in detail for the determination of the parameters (mean value E₅₀ and standard deviation σ) of the associated statistic law. The ignition probability versus applied energy is firstly measured for Lycopodium in order to validate the method. A comparison between the normal and the lognormal law was achieved and the best fit was obtained with the lognormal law.In a second part, the Langlie test was performed on different dusts such as aluminium, cornstarch, lycopodium, coal, and PA12 in order to determine E₅₀ and σ for each dust. The energies E₀₅ and E₁₀ corresponding respectively to an ignition probability of 0.05 and 0.1 are determined with the lognormal law and compared to MIE find in literature. E₀₅ and E₁₀ values of ignition energy were found to be very close and were in good agreement with MIE in the literature.     

PCDD/Fs and dioxin-like PCBs in sediment and biota from the Mondego estuary (Portugal)

The concentrations of 17 polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs), and 12 dioxin-like polychlorinated biphenyls (dl-PCBs) were measured in sediment and key species as an initial investigation on PCDD/Fs and dl-PCBs contamination in the Mondego estuary (Portugal). The results demonstrated that the values of the total PCDD/Fs (∑PCDD/Fs) concentrations were considerably lower than those of the sum of dl-PCBs (∑dl-PCBs) in all the studied samples. Regarding the contribution of individual congeners, OCDD was the predominant PCDD/F and the mono-ortho PCB 118 and PCB 105 were the dominant PCBs in the majority of the samples. Our results suggest that PCDD/Fs and PCBs behave quite differently along the aquatic food web: ∑PCDD/Fs concentrations were lower in higher trophic-level organisms with fish presenting a distinct PCDD/Fs congeners profile; on the contrary, the higher ∑dl-PCBs values were found in upper-level biota, although not exclusively, and quite similar dl-PCBs congener profiles were observed in nearly all the studied species.     

Organic matter compounds as source indicators and tracers for marine pollution in a western Mediterranean coastal zone

Introduction  

Complex organic compounds found in oil and sediments linked with a particular source (such as algae, bacteria or vascular plants) are defined as biomarkers and are useful dating indicators in organic geochemistry.     

Isolation, characterization and diuron transformation capacities of a bacterial strain Arthrobacter sp. N2

A bacterial strain able to transform diuron was isolated from a soil by enrichment procedures. Strain isolation was realized by plating on minimal-agarose medium spread with this herbicide and selecting the colonies surrounded by a clear thin halo. One strain was characterized and identified as an Arthrobacter sp. It metabolized diuron and the final transformation product, 3,4-dichloroaniline, was produced in stoichiometric amounts. The transformation of diuron at different concentrations was more efficient in the presence of alternative sources of carbon and nitrogen. The bacterial activity was also evaluated in soil microcosms with a consequent disappearance of diuron and concomitant appearance of 3,4-dichloroaniline, of which the concentration decreased thereafter. Bacterial cells inoculated in the microcosms survived as viable but eventually nonculturable cells.     

Photochemical transformation of azoxystrobin in aqueous solutions

The photochemical behaviour of azoxystrobin fungicide (AZX) in water was studied under laboratory conditions. Photodegradation was initiated using a solar simulator (xenon arc lamp) or a jacketed Pyrex reaction cell equipped with a 125 W, high-pressure mercury lamp. HPLC/MS analysis (APCI and ESI in positive and negative modes) was used to identify AZX photoproducts. The calculated polychromatic quantum efficiencies (phi) of AZX at pH 4.5, 7 and 9 were 5.42 x 10(-3), 3.47 x 10(-3) and 3.06 x 10(-3) (degraded molecules per absorbed photon), respectively. The relatively narrow range of values indicates the stability of AZX with respect to photodegradation in the studied pH range. Results from the HPLC/MS analysis suggest that the phototransformation of AZX proceeds via multiple, parallel reaction pathways including: (1) photo-isomerization (E-->Z), (2) photo-hydrolysis of the methyl ester and of the nitrile group, (3) cleavage of the acrylate double bond, (4) photohydrolytic ether cleavage between the aromatic ring giving phenol, and (5) oxidative cleavage of the acrylate double bond.     

Prenatal diagnosis of Crigler–Najjar syndrome type I by single-strand conformation polymorphism (SSCP)

Crigler–Najjar syndrome type I (CN-I) is a rare and severe inherited disorder of bilirubin metabolism, caused by the total deficiency of bilirubin-UDP-glucuronosyltransferase (UGT) activity. Enzymatic diagnosis cannot be performed in chorionic villi or amniocytes as UGT is not active in these tissues. The cloning of the UGT1 gene and the identification of disease-causing mutations have led to the possibility of performing DNA-based diagnosis. Here we report DNA-based prenatal diagnosis of CN-I in two Tunisian families in whom CN-I patients were diagnosed. As we had previously shown that CN-I was, in Tunisia, associated with homozygosity for the Q357R mutation within the UGT1 gene, we were able to detect this mutation in both families and to show that it was easily recognized by single-strand conformation polymorphism (SSCP) analysis. In both cases, SSCP analysis of fetal DNA showed that the fetus was heterozygous for the Q357R mutation. In one family, the pregnancy was carried to term and a healthy baby was born, whereas, in the other family, the pregnancy is still continuing. Thus the prenatal diagnosis of CN-I is possible, provided disease-causing mutations have been identified. SSCP analysis of DNA prepared either from amniocytes or from chorionic villi is a simple, reliable and fast method for prenatal diagnosis. Copyright © 2002 John Wiley & Sons, Ltd.