Corrosion behavior of glass and glass-ceramics made of municipal solid waste incinerator fly ash

Glasses and glass-ceramics were prepared by melting municipal solid waste (MSW) incinerator fly ash and their corrosion properties were evaluated. Corrosion of both materials proceeded in two different steps. At the initial stage, the corrosion process is a diffusion-controlled process. After approximately 10 h at the initial stage, weight losses increased linearly with time due to the total dissolution of glasses or glass-ceramics. Leaching of heavy metals from glasses and glass-ceramics were well within international environmental regulations. Corrosion proceeded uniformly in fly ash glass while Na2CaSiO4 crystalline phase was preferentially dissolved in the glass-ceramics.     

Animal-sediment relations in Cape Cod Bay,Massachusetts II. Reworking by Molpadia oolitica (Holothuroidea)

Populations of Molpadia oolitica (Holothuroidea) were sampled over an area of 440 km² in Cape Cod Bay, Massachusetts, USA. This species occurs in silt-clay muds in densities of 2 to 6/m², and is limited to depths greater than 22 m where the highest annual temperature does not exceed 10°C. M. oolitica lives within the mud, with its anterior end located approximately 20 cm below the surface. This species ingests only fine-grained particles at depth in the sediment, and deposits uncompacted feces at the surface, producing a fecal mound around the anal opening. This reworking produces vertical sediment sorting, high sediment-water content, and topographic relief of the sea floor. The fecal cones of M. oolitica provide a relatively stable surface for settlement and growth of the suspension feeders Euchone incolor (polychaete), Aeginina longicornis (amphipod), and Thyasira gouldi (bivalve) Uncompacted feces, accumulated in depressions between the mounds, form an unstable substratum frequently resuspended by tidal flow. Suspension feeders are absent from intercone areas.Contribution No. 236 of the Systematics-Ecology Program, Marine Biological Laboratory, Woods Hole, Massachusetts, USA.     

Riparian Ecosystem Management Model: Sensitivity to Soil,Vegetation, and Weather Input Parameters1

Abstract: The Riparian Ecosystem Management Model (REMM) was developed by the U.S. Department of Agriculture‐Agriculture Research Service (USDA‐ARS) and its cooperators to design and evaluate the efficiency of riparian buffer ecosystems for nonpoint source pollution reduction. REMM requires numerous inputs to simulate water movement, sediment transport, and nutrient cycling in the buffer system. In order to identify critical model inputs and their uncertainties, a univariate sensitivity analysis was conducted for nine REMM output variables. The magnitude of each input parameter was changed from ?50% to +50% from the baseline data in 12 intervals or, in some cases, the complete range of an input was tested. Baseline model inputs for the sensitivity analysis were taken from Gibbs Farm, Georgia, where REMM was tested using a 5‐year field dataset. Results of the sensitivity analysis indicate that REMM responses were most sensitive to weather inputs, with minimum daily temperature having the greatest impact on the nitrogen‐related outputs. For example, the 100% change (?50% to +50%) in minimum daily temperature input values yielded a 164.4% change in total nitrogen (N), a 109.3% change in total nitrate (NO₃), and a 127.1% change in denitrification. REMM was most sensitive to precipitation with regard to total flow leaving the riparian vegetative buffer zone (199.8%) and sediment yield (138.2%). Deep seepage (12.2%), volumetric water content (24.8%), and pore size index (6.5%) in the buffer soil profile were the most influential inputs for the output water movement. Sediment yield was most sensitive to Manning’s coefficient (46.6%), bare soil percent (40.7%), and soil permeability (6.1%). For vegetation, specific leaf area, growing degree day coefficients, and maximum root depth influenced the nitrogen related outputs. Overall results suggest that because of the high sensitivity to weather parameters, on‐site weather data is needed for model calibration and validation. The model’s relatively low sensitivity to vegetation parameters also appears to support the use of regional vegetation datasets that would simplify model implementation without compromising results.     

Epidemiology of musculoskeletal symptoms among Korean hospital nurses.

We investigated the epidemiology of musculoskeletal symptoms (MSS) among a complete cross-section of 330 nurses from a large Korean hospital, by means of a questionnaire survey (response rate: 97.9%). The prevalence of MSS at any body site was 93.6%, with symptoms most commonly reported at the shoulder (74.5%), lower back (72.4%), neck (62.7%), lower legs (52.1%) and hand/wrist (46.7%). Logistic regression indicated that nurses who undertook manual handling of patients were 7.2 times as likely to report MSS (OR 7.2, 95%CI 1.2-42.3, P = .0275), while nurses suffering from periodic depression experienced a 3.3-fold MSS risk (OR 3.3, 95%CI 1.3-8.3, P = .0104). Overall, our study suggests that Korean nurses incur a very high MSS burden when compared internationally. A greater commitment is needed to improve physical conditions, occupational tasks and psychosocial work issues among nurses in this country.     

Dilemmas and advances in corporate social responsibility in Brazil. The work of the Ethos Institute

This article discusses the development of corporate social responsibility (CSR) in Brazil from the perspective of the Ethos Institute of Business and Social Responsibility. The Institute is a not‐for‐profit, non‐governmental organization, that has played a leading role in the Brazilian CSR effort. In Brazil, CSR initiatives have a long tradition of philanthropy, a consequence of the country's great social inequalities. The increased attention to corporate social responsibility has paralleled growing concern about sustainable development and the intensifying activities of pressure groups (consumers, customers, investors, NGOs, labour unions, the media, among others) that have been increasing since the 1990s as natural resources are progressively becoming exhausted, social tensions rising and environmental conditions deteriorating worldwide. This article identifies problems and obstacles to the growth of corporate social responsibility in Brazil, as well as advances and alternatives for CSR and towards creating conditions for the country to be internationally competitive and sustainable in the financial, social and environmental areas.     

A Kinetic Study of Aerobic Propane Uptake and Cometabolic Degradation of Chloroform, cis-Dichloroethylene and Trichloroetylene in Microcosms with Groundwater/Aquifer Solids

The focus of this study was to compare the behavior of different consortiums of aerobic propane-utilizing microorganisms, with respect to both the lag time for growth after exposure to propane, and their ability to transform three chlorinated aliphatic hydrocarbons (CAHs): chloroform (CF), cis-dichloroethylene (c-DCE) and trichloroethylene (TCE). Thirty-three slurry microcosms, representing seven combinations of aquifer solids and groundwater were constructed for this study. The lag time required for establishing propane-utilizing consortiums ranged between 24 and 29 days in 6 of the 7 combinations. Kinetic tests were performed with respect to propane utilization and CAH transformation. After CAH exposure, the ability of the microorganisms to metabolize propane was significantly reduced. CF and TCE were transformed more slowly than c-DCE, the average values of the initial transformation rates being equal to 0.10 ± 0.04, 0.09 ± 0.05 and 0.98 ± 0.18 mol/(L h),respectively. CF caused the greatest reduction in propane uptake rates, whereas c-DCE exhibited an apparently reversible negative effect on propane uptake rates. The estimates of the Monod half-saturation constants relative to CF, TCE and c-DCE resulted in the 2–3 mol/L range, but were characterized by a high degree of uncertainty.     

Improving corporate environmental performance through economic value added

These days, corporate annual reports are full of references to shareholder wealth creation. In today's highly competitive capital markets, most chief executives understand that unless they are seen as value creators, investors will place their scarce capital somewhere else. Clear evidence of the growing importance, even dominance, of shareholder wealth creation is the growing use of a performance measure known as economic value added (EVA®).¹ Within ten years, it is almost certain that most large, publicly traded companies in the United States will be using EVA or something like it as a primary performance evaluation tool. Recently, many non-American companies have also adopted it to better align the incentives of managers with shareholders and to signal their commitment to value creation. EVA is not widely known or understood among environmental specialists, and those who have heard about it often fear it. We find this attitude unfortunate. In this article, we discuss EVA and how its use can aid corporate environmental managers in promoting more proactive environmental investments, and in funding capital investments on environmental improvement, waste reduction, and pollution control in their companies. The use of EVA and other shareholder value measures can also improve general capital investment decisions by integrating environmental factors that affect the long-term interests of the corporation into the managerial decision-making process.     

Mineralogical and geochemical characterization of arsenic in an abandoned mine tailings of Korea

The mineralogical and chemical characteristics of As solid phases in arsenic-rich mine tailings from the Nakdong As–Bi mine in Korea was investigated. The tailings generated from the ore roasting process contained 4.36% of As whereas the concentration was up to 20.2% in some tailings from the cyanidation process for the Au extraction. Thin indurated layers and other secondary precipitates had formed at the surfaces of the tailings piles and the As contents of the hardened layers varied from 2.87 to 16.0%. Scorodite and iron arsenate (Fe₃AsO₇) were the primary As-bearing crystalline minerals. Others such as arsenolamprite, bernardite and titanium oxide arsenate were also found. The amorphous As–Fe phases often showed framboidal aggregates and gel type textures with desiccation cracks. Sequential extraction results also showed that 55.7–91.1% of the As in tailings were NH₄-oxalate extractable As, further confirmed the predominance of amorphous As–Fe solid phases. When the tailings were equilibrated with de-ionized water, the solution exhibited extremely acidic conditions (pH 2.01–3.10) and high concentrations of dissolved As (up to 29.5 mg L⁻¹), indicating high potentials for As to be released during rainfall events. The downstream water was affected by drainage from tailings and contained 12.7–522 μg L⁻¹ of As. The amorphous As–Fe phases in tailings have not entirely been stabilized through the long term natural weathering processes. To remediate the environmental harms they had caused, anthropogenic interventions to stabilize or immobilize As in the tailings pile should be explored.