IMPACTS OF WATER QUALITY IMPROVEMENT ON SITE VISITATION: A PROBABILISTIC MODELING APPROACH1

ABSTRACT: The influence of perceptions of water quality on the likelihood of recreating at a particular recreation site is investigated using a logit model. The model is estimated for St. Albans Bay, Vermont. A hypothetical improvement in water quality was shown to greatly increase the probability of at least one visit to the bay during a season. This implies that many recreationists who do not use the bay at present will do so if water quality improves. A demand model for predicting site visitation must, therefore, include current nonusers in the sample. Failure to do so would result in misleading predictions about future demand for the bay.     

Recycling of tailings from Korea Molybdenum Corporation as admixture for high-fluidity concrete

The main objective of this study is to develop an eco-friendly and a large recycling technique of flotation Tailings from korea (TK) from metal mines as construction materials such as admixtures for high-fluidity concrete (HFC). TK used in this study was obtained from the Korea Molybdenum Corporation in operation. TK was used as the alternative material to adjust flowability and viscosity of HFC in the form of powder agent which enables adjustment of concrete compressive strength. In this study, we have performed concrete rheological tests and concrete flowability tests to obtain the quality characteristics of TK for using as the admixture in producing HFC. The results indicated that the adequate mix ratio of cement to TK should be 8:2 (vol%). It is more effective to use the TK as admixture to control flowability, viscosity and strength of HFC than the normal concrete. It was found that TK could be recycled construction materials in bulk such as admixture for HFC, in terms of the economic and eco-friendly aspects.     

Degradation of different pesticides in water by microplasma: the roles of individual radicals and degradation pathways

Environmental Science and Pollution Research - Pesticides are emergent toxins often identified in aquatic environments. In the present study, microplasma was employed to reduce the pesticide...     

Solid recovery rate of food waste recycling in South Korea

Source-separated collection system of household food waste has been implemented national wide in South Korea. Food waste recycling rate that means conversion rate to recycle is over 90 % in present. However, over the value of 90 %, we need to enhance the efficiency of food waste recycling process. We analyzed material flow of 24 food waste recycling facilities and calculated solid recovery rate to key-process. We found that 3–13 % of the solids from food waste outflows with foreign materials and 27–33 % of the solids outflow with wastewater. As a result, solid recovery rates are 65.3, 60.9, and 56.3 % in wet feed facility, dry feed facility, and composting facility, respectively. Alternative ways to recovery solid from wastewater or collection tools to exclude plastic bags, salt, and moisture content are required to make food waste recycling more efficient.     

Perceived and measured levels of environmental pollution: interdisciplinary research in the subarctic lowlands of northeast European Russia

Using interdisciplinary field research in the Usa Basin, northeast European Russia, we compared local inhabitants' perception of environmental problems with chemical and remote-sensing signatures of environmental pollution and their local impacts. Extensive coal mining since the 1930s around Inta and Vorkuta has left a legacy of pollution, detected by measuring snowpack, topsoil, and lichen chemistry, together with remote-sensing techniques and analysis of lake water and sediments. Vorkuta and its environs suffered the worst impacts, with significant metal loading and alkalization in lakes and topsoils, elevated metals and cations in terricolous (reindeer) lichens, and changes in vegetation communities. Although the coal industry has declined recently, the area boasts a booming oil and gas industry, based around Usinsk. Local perceptions and concerns of environmental pollution and protection were higher in Usinsk, as a result of increased awareness after a major oil spill in 1994, compared with Vorkuta's inhabitants, who perceived air pollution as the primary environmental threat. Our studies indicate that the principal sources of atmospheric emissions and local deposition within 25 to 40 km of Vorkuta were coal combustion from power and heating plants, coal mines, and a cement factory. Local people evaluated air pollution from direct observations and personal experiences, such as discoloration of snow and respiratory problems, whereas scientific knowledge played a minor role in shaping these perceptions.     

Enhanced Co-Metabolism of TCDD in the Presence of High Concentrations of Phenoxy Herbicides

Chemical residue studies were conducted from 1977-1987 on sites where spills of Agent Orange had occurred in the Herbicide Storage Sites at the Naval Construction Battalion Center, Gulfport, Mississippi, and on Johnston Island, Central Pacific Ocean. The soil persistence time of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) was significantly decreased when in the presence of massive amounts of phenoxy herbicides (> 62,000 microg of herbicide/g of soil). Although microbial populations doubled in the most highly contaminated sites, fungal species diversity decreased. The dominant fungal species that appeared to be associated with the metabolism of the residues were of the genera Penicillium, Mucor, and Fusarium. TCDD level decreased from a mean high of 180 ng/g (ppb) to less than 1 ng/g of soil over a ten-year period.     

Summer time haze characteristics of the urban atmosphere of Gwangju and the rural atmosphere of Anmyon, Korea

An extensive visibility monitoring was carried out simultaneously in the urban area of Gwangju and the rural area of Anmyon, Korea. This study examines patterns of visibility impairment and haze-forming pollutant concentrations on both sites resulting from natural and anthropogenic sources of gases and particles. Optical visibility measurements by a transmissometer, a nephelometer and an aethalometer provide aerosol light extinction, scattering, and absorption coefficients for both sites. In order to investigate the physico-chemical characteristics of atmospheric aerosols, aerosol samples were collected by various aerosol samplers at GJVMS (Gwangju Visibility Monitoring Station) and at KGAWO (Korea Global Atmosphere Watch Observatory), respectively. In addition, haze characteristics causing visibility impairment at those two sites were analyzed to obtain source contributions by regionally transported aerosols using grid analysis and display system (GrADS) from NECP reanalysis data. During the intensive monitoring period, ammonium sulfate was dominantly responsible for the fine particle mass loading at GJVMS, whereas organic carbon was the largest contributor at KGAWO. Light scattering by particles accounted for 52.8 to 81.3% of the range at the urban site, GJVMS and for 72.1 to 94.2% of the range at the rural site, KGAWO. Light absorption by the EC and NO₂ was between 14.5 and 34.8% at GJVMS, which was higher than the observed 1.1 ∼ 6.8% at KGAWO, respectively. Light scattering by aerosol was higher in the rural area than in the urban area. And organic carbon concentration was observed to be significantly higher than the concentration of elemental carbon at KGAWO. These haze-forming carbonaceous particles originate from anthropogenic pollutants at the urban atmosphere but they can be produced by natural environments such as marine and forest at the rural atmosphere.     

Distributions of heavy metals in the sediments of South Korean harbors

Bottom sediments of harbors in the South Korea have been long suspected for metal contamination due to ship-based and urban-based activities for the past several decades. A number of areas have been suspected to impair ecosystem services to the local residents and drawn complaints from main stakeholders. Twelve contamination suspected harbors were subject to evaluate the level of contamination of Cr, Ni, Cu, Zn, As, Cd, Pb and Hg. The level of sediment contamination for each metal was evaluated comparing the relative enrichment of a given metal to pollution-insensitive aluminum. Regional background concentration of a given metal was also determined based on its down core measurement and sediment texture. Ecological risk posed by the presence of heavy metals was evaluated using the sediment quality guidelines (SQGs) developed by United States National Ocean and Atmosphere Administration (US NOAA) as benchmarks for evaluating sediment chemistry to aquatic organisms. Cu, Zn, Cd, Pb and Hg in the surface sediment were found to be higher than a factor of 1.5 than background sediments, and the overall metal contaminations of surface sediment can be regarded as medium-high- to high-priority sites in the sense of SQGs.     

A carbon balance method for paper and wood products

The approach used to track the flow of carbon sequestered in the forest through harvest, processing into products, and final disposition of products is described. The methodology is broadly flexible and applicable to forest-based carbon balance assessments. A carbon balance is computed across all forestland ownerships for the production facility of interest. The balance considers forest uptake, harvest, combustion of fuels, emissions from process steps and losses from product use, disposition and recycling. The method also allows for sensitivity and marginal assessments of a variety of real and hypothetical situations using variable assumptions. Example results for a vertically integrated pulp and paper mill are presented. Results suggest that integrated forest products facilities drawing their raw material from sustainably managed forests can achieve a net positive carbon balance over the product cycle. The amount of net carbon sequestration attributable to such facilities depends upon a number of factors. The most critical of these include net forest growth, the method for allocating the growth in forest carbon among all of those harvesting from the drain area of a given facility, and the use and disposal patterns for the paper or wood products manufactured.